Equivalent & Substitute Parts for EEE-FPJ182UAP

Part Overview

The EEE-FPJ182UAP is a 1800 µF, 6.3 V aluminum electrolytic capacitor in surface mount radial can package manufactured by Panasonic Electronic Components. This part is classified as Active product status and is designed for automotive applications with AEC-Q200 qualification. Substitute parts are necessary when the primary part becomes unavailable, when inventory constraints require alternative sourcing, or when design flexibility permits selection from qualified equivalent components within the same electrical and mechanical specifications.

Key Parameters

Parameter	Value
Capacitance	1800 µF
Voltage Rating	6.3 V
Tolerance	±20%
ESR @ 100 kHz	80 mOhm
Lifetime	2000 Hrs @ 105°C
Operating Temperature Range	-55°C ~ 105°C
Package Type	Radial, Can - SMD
Case Size	10.00 mm Dia × 10.20 mm Height (Max)
Land Size	10.30 mm × 10.30 mm
Mounting Type	Surface Mount
AEC-Q200 Rating	Yes
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution eligibility for the EEE-FPJ182UAP is determined by strict equivalence across the following critical parameters: capacitance value (1800 µF), voltage rating (6.3 V), tolerance (±20%), ESR specification (80 mOhm @ 100 kHz), lifetime rating (2000 Hrs @ 105°C), operating temperature range (-55°C ~ 105°C), package type (Radial, Can - SMD), case dimensions (10.00 mm diameter with maximum seated height tolerance), land pattern (10.30 mm × 10.30 mm), and automotive qualification (AEC-Q200). All identified substitute parts meet these core electrical and mechanical requirements. Variations in product status, ripple current ratings, or height tolerances within specification do not disqualify a part from substitution eligibility when all primary parameters align.

Parameter Comparison

Parameter	EEE-FPJ182UAP (Panasonic)	EEE-FK0J182SP (Panasonic)	6.3TKV1800M10X10.5 (Rubycon)	EMZJ6R3ARA182MJA0G (Chemi-Con)
Manufacturer	Panasonic Electronic Components	Panasonic Electronic Components	Rubycon	Chemi-Con
Capacitance	1800 µF	1800 µF	1800 µF	1800 µF
Voltage Rating	6.3 V	6.3 V	6.3 V	6.3 V
Tolerance	±20%	±20%	±20%	±20%
ESR @ 100 kHz	80 mOhm	80 mOhm	80 mOhm	60 mOhm
Lifetime @ 105°C	2000 Hrs	2000 Hrs	2000 Hrs	2000 Hrs
Operating Temperature	-55°C ~ 105°C	-55°C ~ 105°C	-55°C ~ 105°C	-55°C ~ 105°C
Case Diameter	10.00 mm	10.00 mm	10.00 mm	10.00 mm
Height (Max)	10.20 mm	10.50 mm	10.50 mm	10.30 mm
Land Size	10.30 mm × 10.30 mm	10.30 mm × 10.30 mm	10.30 mm × 10.30 mm	10.30 mm × 10.30 mm
Package Type	Radial, Can - SMD	Radial, Can - SMD	Radial, Can - SMD	Radial, Can - SMD
AEC-Q200	Yes	Yes	Yes	Yes
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Product Status	Active	Not For New Designs	Active	Active

Engineering Selection Recommendations

For new designs, EEE-FPJ182UAP (Active status) and 6.3TKV1800M10X10.5 (Active status) are preferred selections. Both parts carry Active product status and full AEC-Q200 automotive qualification with ROHS3 compliance.

EEE-FK0J182SP carries Not For New Designs status and should be reserved for legacy system support or replacement applications only.

EMZJ6R3ARA182MJA0G (Chemi-Con) is an Active product with full automotive qualification. This part features lower ESR (60 mOhm versus 80 mOhm) and higher ripple current capability, making it suitable for applications where reduced thermal dissipation or improved high-frequency performance is beneficial.

Height variation exists among substitutes: EEE-FPJ182UAP maximum height is 10.20 mm, while EEE-FK0J182SP and 6.3TKV1800M10X10.5 reach 10.50 mm maximum height. EMZJ6R3ARA182MJA0G reaches 10.30 mm maximum height. PCB layout clearance must accommodate the taller substitute parts if space constraints are critical.

Frequently Asked Questions (FAQ)

Q: Can EEE-FK0J182SP replace EEE-FPJ182UAP in new designs?

A: EEE-FK0J182SP is classified as Not For New Designs. While electrical and mechanical parameters are equivalent, this part should not be selected for new product development. Use EEE-FPJ182UAP, 6.3TKV1800M10X10.5, or EMZJ6R3ARA182MJA0G for new designs.

Q: What is the difference between EMZJ6R3ARA182MJA0G and the other substitutes?

A: EMZJ6R3ARA182MJA0G has lower ESR (60 mOhm versus 80 mOhm) and higher ripple current ratings. All other electrical and mechanical parameters remain equivalent. The lower ESR may reduce heat generation in high-ripple-current applications.

Q: Are there height restrictions when substituting parts?

A: Yes. EEE-FPJ182UAP has a maximum seated height of 10.20 mm. Substitute parts EEE-FK0J182SP and 6.3TKV1800M10X10.5 reach 10.50 mm, and EMZJ6R3ARA182MJA0G reaches 10.30 mm. PCB layout must provide adequate clearance for taller substitutes. If height is constrained to 10.20 mm maximum, only EEE-FPJ182UAP is suitable.

Q: Do all substitute parts have AEC-Q200 qualification?

A: Yes. All listed substitute parts carry AEC-Q200 automotive qualification and ROHS3 compliance, meeting automotive industry standards.

Q: Can I use these parts interchangeably on the same PCB?

A: All substitute parts share identical land pattern (10.30 mm × 10.30 mm) and mounting type (Surface Mount). Electrical substitution is valid. Height differences must be considered for mechanical clearance. Verify PCB layout accommodates the maximum height of the selected substitute part.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message