Panasonic EEE-FPE101XAV Aluminum Electrolytic Capacitor - Equivalent & Substitute Parts

Part Overview

The Panasonic EEE-FPE101XAV is a 100 µF, 25 V aluminum electrolytic capacitor in surface mount radial can package, designed for automotive and high-temperature reflow applications. This Active product meets AEC-Q200 automotive qualification standards and operates across -55°C to 105°C. Substitute parts are identified when equivalent electrical performance, mechanical compatibility, and compliance certifications align with the original specification.

Substiute Parts

EEE-FPE101XAV

Panasonic Electronic ComponentsIn Stock: 1840EEE-FPE101XAV Datasheet

Current PartRFQ

EEE-FKE101XAV

Panasonic Electronic ComponentsIn Stock: 2161EEE-FKE101XAV Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the EEE-FPE101XAV is determined by the following critical parameters:

• Capacitance value: 100 µF (exact match required)
• Voltage rating: 25 V (exact match required)
• Tolerance: ±20% (exact match required)
• Package type: Radial, Can - SMD with identical physical dimensions (0.248" Dia × 0.327" H)
• Land size: 0.260" L × 0.260" W (exact match required for PCB compatibility)
• Operating temperature range: -55°C to 105°C (minimum requirement)
• Lifetime specification: 2000 Hrs @ 105°C (minimum requirement)
• Compliance: AEC-Q200 automotive qualification (required for automotive applications)
• RoHS and MSL ratings: ROHS3 Compliant, MSL 1 (required for manufacturing compatibility)

The EEE-FKE101XAV meets all substitution criteria. Variations in ESR and ripple current ratings do not disqualify substitution when all primary electrical and mechanical parameters align.

Parameter Comparison

Engineering Selection Recommendations

Both the EEE-FPE101XAV and EEE-FKE101XAV are Active products manufactured by Panasonic Electronic Components and hold AEC-Q200 automotive qualification. Both comply with ROHS3 and carry MSL 1 ratings, meeting manufacturing and environmental requirements for automotive and high-temperature reflow applications.

Selection between these parts depends on circuit-specific ripple current requirements. The EEE-FPE101XAV (FP series) provides higher ripple current capacity at both low frequency (390 mA @ 120 Hz) and high frequency (600 mA @ 100 kHz), with lower ESR (160 mOhm @ 100 kHz). The EEE-FKE101XAV (FK series) operates with higher ESR (340 mOhm @ 100 kHz) and reduced ripple current ratings (182 mA @ 120 Hz, 280 mA @ 100 kHz).

For applications where ripple current handling is not a limiting factor, the EEE-FKE101XAV provides a direct substitute with identical mechanical fit and electrical core specifications.

Frequently Asked Questions (FAQ)

Q: Can the EEE-FKE101XAV replace the EEE-FPE101XAV in any application?

A: The EEE-FKE101XAV is mechanically and electrically compatible for substitution when circuit ripple current requirements do not exceed 182 mA @ 120 Hz or 280 mA @ 100 kHz. Both parts share identical capacitance, voltage rating, tolerance, package dimensions, land size, and compliance certifications.

Q: What is the difference in ESR between these parts?

A: The EEE-FPE101XAV has an ESR of 160 mOhm @ 100 kHz, while the EEE-FKE101XAV has an ESR of 340 mOhm @ 100 kHz. Higher ESR results in increased heat generation under ripple current stress. Circuit thermal analysis determines whether the higher ESR of the FK series is acceptable.

Q: Are both parts suitable for automotive applications?

A: Yes. Both the EEE-FPE101XAV and EEE-FKE101XAV hold AEC-Q200 automotive qualification and operate across -55°C to 105°C with 2000 Hrs lifetime @ 105°C, meeting automotive reliability standards.

Q: Will the EEE-FKE101XAV fit the same PCB footprint?

A: Yes. Both parts have identical physical dimensions (0.248" Dia × 0.327" H) and land size (0.260" L × 0.260" W), ensuring direct PCB compatibility without layout modification.

Q: Are there any moisture sensitivity or RoHS compliance differences?

A: No. Both parts carry MSL 1 (Unlimited) moisture sensitivity rating and are ROHS3 Compliant, with identical manufacturing and environmental compatibility.