Equivalent & Substitute Parts for EEE-FP1V330AV

Part Overview

The EEE-FP1V330AV is a 33 µF, 35 V aluminum electrolytic capacitor in surface mount radial can package, manufactured by Panasonic Electronic Components. This component is rated for automotive applications and high temperature reflow processes, with AEC-Q200 certification and a 2000-hour lifetime at 105°C. The part is currently active in production with 1822 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters allow direct replacement in the same circuit application without design modification.

Substiute Parts

EEE-FP1V330AV

Panasonic Electronic ComponentsIn Stock: 1931EEE-FP1V330AV Datasheet

Current PartRFQ

EEE-FK1V330AV

Panasonic Electronic ComponentsIn Stock: 1830EEE-FK1V330AV Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the EEE-FP1V330AV is determined by strict equivalence in the following parameters:

Capacitance value must be 33 µF with ±20% tolerance. Voltage rating must be 35 V or higher. Package and mounting type must be identical: Radial, Can - SMD with surface mount configuration. Physical dimensions must match: 0.248" diameter (6.30mm) and 0.252" maximum seated height (6.40mm). Land size must be 0.260" L x 0.260" W (6.60mm x 6.60mm). Operating temperature range must span -55°C to 105°C minimum. Lifetime rating must be 2000 hours at 105°C or greater. Polarization must be polar. RoHS3 compliance and AEC-Q200 certification are required for automotive applications.

The EEE-FK1V330AV meets all these criteria and is classified as a parametric equivalent substitute. Variations in ESR (Equivalent Series Resistance) and ripple current ratings do not disqualify substitution when the core electrical and mechanical parameters remain within specification.

Parameter Comparison

Engineering Selection Recommendations

Both EEE-FP1V330AV and EEE-FK1V330AV are active production parts with AEC-Q200 automotive qualification and ROHS3 compliance. Selection between these parts should be based on circuit-specific ripple current requirements. The EEE-FP1V330AV provides higher ripple current capacity at both low frequency (195 mA @ 120 Hz) and high frequency (300 mA @ 100 kHz), with lower ESR of 260 mOhm at 100 kHz. The EEE-FK1V330AV offers lower ripple current ratings (156 mA @ 120 Hz, 240 mA @ 100 kHz) with higher ESR of 360 mOhm at 100 kHz. Both parts share identical capacitance, voltage rating, tolerance, temperature range, lifetime rating, package dimensions, and land size specifications. Substitution is valid when the application's ripple current demands do not exceed the substitute part's rated values.

Frequently Asked Questions (FAQ)

Q: Can EEE-FK1V330AV replace EEE-FP1V330AV in any application?

A: Substitution is valid when the circuit's ripple current requirements do not exceed the EEE-FK1V330AV ratings of 156 mA @ 120 Hz or 240 mA @ 100 kHz. Both parts are electrically and mechanically equivalent in all other parameters.

Q: What is the difference in ESR between these parts?

A: The EEE-FP1V330AV has 260 mOhm ESR at 100 kHz, while the EEE-FK1V330AV has 360 mOhm ESR at 100 kHz. Higher ESR may affect circuit performance in applications sensitive to impedance characteristics.

Q: Are both parts suitable for automotive applications?

A: Yes. Both EEE-FP1V330AV and EEE-FK1V330AV carry AEC-Q200 certification and are rated for automotive and high temperature reflow applications.

Q: Do these parts have identical physical footprints?

A: Yes. Both parts have identical dimensions (0.248" diameter, 0.252" maximum height) and land size (0.260" L x 0.260" W), allowing direct PCB layout compatibility.

Q: What is the moisture sensitivity level for these capacitors?

A: Both parts have MSL 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.

Q: Are these parts RoHS compliant?

A: Yes. Both EEE-FP1V330AV and EEE-FK1V330AV are ROHS3 compliant and REACH unaffected.