EEE-FP1V101AV Equivalent & Substitute Parts

Part Overview

The EEE-FP1V101AV is a 100 µF, 35 V aluminum electrolytic capacitor in surface mount radial can package, manufactured by Panasonic Electronic Components. This component is rated for automotive applications and high temperature reflow processes, with AEC-Q200 qualification. The part is currently active in production with 836 units in stock. Substitute parts are identified when equivalent electrical performance and mechanical compatibility are required due to availability constraints, design flexibility, or supply chain optimization.

Substiute Parts

EEE-FP1V101AV

Panasonic Electronic ComponentsIn Stock: 904EEE-FP1V101AV Datasheet

Current PartRFQ

EEE-FK1V101AV

Panasonic Electronic ComponentsIn Stock: 1470EEE-FK1V101AV Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the EEE-FP1V101AV is determined by the following critical parameters:

• Capacitance value: 100 µF (exact match required)
• Voltage rating: 35 V (exact match required)
• Tolerance: ±20% (exact match required)
• Package type: Radial, Can - SMD (exact match required)
• Case dimensions: 0.315" Dia (8.00 mm) and height 0.425" (10.80 mm) (exact match required)
• Land size: 0.327" L x 0.327" W (8.30 mm x 8.30 mm) (exact match required)
• Operating temperature range: -55°C to 105°C (exact match required)
• Polarization: Polar (exact match required)
• Mounting type: Surface Mount (exact match required)
• AEC-Q200 qualification: Required for automotive applications
• RoHS3 compliance: Required for regulatory compliance

The EEE-FK1V101AV meets all substitution criteria. While ESR and ripple current specifications differ, these variations remain within acceptable operational parameters for the specified application category.

Parameter Comparison

Engineering Selection Recommendations

Both the EEE-FP1V101AV and EEE-FK1V101AV are active production parts with full AEC-Q200 automotive qualification and ROHS3 compliance. Selection between these parts is based on application-specific ripple current and ESR requirements. The EEE-FP1V101AV provides lower ESR (80 mOhm) and higher ripple current handling (850 mA @ 100 kHz), suitable for applications requiring superior high-frequency performance. The EEE-FK1V101AV, with higher ESR (160 mOhm) and lower ripple current ratings (600 mA @ 100 kHz), remains suitable for standard automotive applications where these performance characteristics are acceptable. Both parts share identical mechanical footprints, voltage ratings, capacitance values, and temperature operating ranges, ensuring direct PCB compatibility.

Frequently Asked Questions (FAQ)

Q: Can EEE-FK1V101AV replace EEE-FP1V101AV in all applications?

A: Direct substitution is mechanically and electrically feasible due to identical package dimensions, capacitance, voltage rating, and operating temperature range. However, the higher ESR and lower ripple current specifications of the EEE-FK1V101AV must be evaluated against circuit requirements. Applications with stringent high-frequency ripple current demands may require the EEE-FP1V101AV.

Q: Are the land sizes identical between these parts?

A: Yes. Both parts feature identical surface mount land sizes of 0.327" L x 0.327" W (8.30 mm x 8.30 mm), ensuring PCB layout compatibility without modification.

Q: Do both parts meet automotive qualification standards?

A: Yes. Both the EEE-FP1V101AV and EEE-FK1V101AV carry AEC-Q200 qualification and are suitable for automotive applications.

Q: What is the significance of the different ESR values?

A: ESR (Equivalent Series Resistance) affects voltage ripple and heat generation. The EEE-FP1V101AV at 80 mOhm provides lower impedance at 100 kHz, resulting in reduced voltage ripple and lower thermal dissipation. The EEE-FK1V101AV at 160 mOhm is acceptable for applications with less stringent ripple requirements.

Q: Are both parts RoHS compliant?

A: Yes. Both parts are ROHS3 compliant and meet current environmental regulations.