Equivalent & Substitute Parts for EEE-FP0J221AP

Part Overview

The EEE-FP0J221AP is a 220 µF, 6.3 V aluminum electrolytic capacitor in surface mount radial can package manufactured by Panasonic Electronic Components. This component is rated for automotive applications with AEC-Q200 compliance and operates across -55°C to 105°C with a 2000-hour lifetime at 105°C. The part is actively produced and widely available in inventory.

Substitute parts are identified when electrical characteristics (capacitance, voltage rating, tolerance, lifetime, temperature range, and ripple current specifications) and mechanical compatibility (package type, mounting footprint, and dimensions) align with the original specification. Equivalent parts from alternative manufacturers or different packaging formats are listed to support supply chain flexibility and design optimization.

Substiute Parts

EEE-FP0J221AP

Panasonic Electronic ComponentsIn Stock: 1382EEE-FP0J221AP Datasheet

Current PartRFQ

EEE-FK0J221AP

Panasonic Electronic ComponentsIn Stock: 7158EEE-FK0J221AP Datasheet

DirectRFQ

EEE-FK0J221P

Panasonic Electronic ComponentsIn Stock: 29869EEE-FK0J221P Datasheet

DirectRFQ

EEE-FT1A221AP

Panasonic Electronic ComponentsIn Stock: 2495EEE-FT1A221AP Datasheet

UpgradeRFQ

EEE-FT1C221AP

Panasonic Electronic ComponentsIn Stock: 1000236EEE-FT1C221AP Datasheet

UpgradeRFQ

6.3TZV220M6.3X6.1

RubyconIn Stock: 61556.3TZV220M6.3X6.1 Datasheet

DirectRFQ

AFK227M06D16T-F

Cornell Dubilier Electronics (CDE)In Stock: 2593AFK227M06D16T-F Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts are classified into two categories based on electrical and mechanical compatibility:

Direct Equivalents maintain identical electrical specifications (220 µF, 6.3 V, ±20% tolerance, 2000 Hrs @ 105°C, AEC-Q200) with compatible package dimensions and mounting footprints. These parts differ only in packaging format (Tape & Reel vs. Cut Tape) or manufacturer, allowing direct board-level substitution without design modification.

Upgrade Equivalents increase the voltage rating (10 V or 16 V) while maintaining all other electrical parameters. These parts are electrically backward-compatible and occupy identical physical space, providing enhanced voltage margin for circuit protection.

The key parameters determining substitution eligibility are:

• Capacitance value (220 µF)
• Tolerance (±20%)
• Lifetime specification (2000 Hrs @ 105°C)
• Operating temperature range (-55°C to 105°C)
• Package type (Radial, Can - SMD)
• Case diameter (6.30 mm)
• Land size (6.60 mm × 6.60 mm)
• AEC-Q200 automotive rating
• RoHS3 compliance

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts maintain active product status and full AEC-Q200 automotive compliance with RoHS3 certification, ensuring regulatory and quality alignment with the original EEE-FP0J221AP specification.

Direct Equivalents (EEE-FK0J221AP, EEE-FK0J221P, 6.3TZV220M6.3X6.1, AFK227M06D16T-F) are electrically and mechanically compatible for direct substitution. Selection among these parts depends on packaging availability and supply chain requirements. The EEE-FK series from Panasonic and 6.3TZV series from Rubycon are preferred for high-volume automotive applications due to established qualification history. The AFK227M06D16T-F from Cornell Dubilier offers an alternative from a qualified manufacturer with slightly different land size (6.60 mm × 7.80 mm).

Upgrade Equivalents (EEE-FT1A221AP at 10 V, EEE-FT1C221AP at 16 V) provide increased voltage margin while maintaining identical capacitance, tolerance, lifetime, and ripple current specifications. These parts occupy the same physical footprint and are suitable for designs requiring enhanced overvoltage protection. The EEE-FT1C221AP offers the highest voltage rating with extensive inventory availability.

Frequently Asked Questions (FAQ)

Q: Can EEE-FK0J221AP replace EEE-FP0J221AP directly on the PCB?

A: Yes. Both parts share identical capacitance (220 µF), voltage rating (6.3 V), tolerance (±20%), lifetime (2000 Hrs @ 105°C), and mounting footprint (6.60 mm × 6.60 mm land size). The primary difference is packaging format (Cut Tape vs. Tape & Reel) and case height (6.10 mm vs. 5.80 mm). The 0.30 mm height difference does not affect PCB assembly compatibility for standard surface mount processes.

Q: What is the difference between direct equivalents and upgrade equivalents?

A: Direct equivalents (EEE-FK0J221AP, EEE-FK0J221P, 6.3TZV220M6.3X6.1, AFK227M06D16T-F) maintain the 6.3 V rating and are electrically identical to the original part. Upgrade equivalents (EEE-FT1A221AP, EEE-FT1C221AP) increase the voltage rating to 10 V or 16 V respectively, providing additional voltage headroom while maintaining all other specifications. Upgrade parts are backward-compatible and occupy identical physical space.

Q: Are all substitute parts AEC-Q200 qualified?

A: Yes. All listed substitute parts carry AEC-Q200 automotive qualification and RoHS3 compliance, meeting the same regulatory and quality standards as the original EEE-FP0J221AP.

Q: Does the ESR specification affect substitution eligibility?

A: ESR is a performance characteristic that influences ripple current handling and thermal behavior. The original EEE-FP0J221AP specifies 260 mOhm @ 100 kHz. Direct equivalents from Panasonic (EEE-FK series) and Rubycon (6.3TZV series) do not publish ESR values but maintain equivalent ripple current ratings. The Cornell Dubilier AFK227M06D16T-F specifies 360 mOhm, which is higher but still within acceptable limits for the 220 µF, 6.3 V category. All parts are suitable for the same circuit applications.

Q: Can I use the 16 V upgrade (EEE-FT1C221AP) in place of the 6.3 V original?

A: Yes. The EEE-FT1C221AP is electrically and mechanically compatible. The higher voltage rating (16 V vs. 6.3 V) provides additional safety margin and does not degrade circuit performance. This upgrade is appropriate for designs requiring enhanced overvoltage protection or where supply voltage tolerance is a concern.

Q: What packaging options are available?

A: Substitute parts are available in Tape & Reel (TR) and Cut Tape & Digi-Reel formats. Tape & Reel packaging is standard for high-volume production. Cut Tape & Digi-Reel options (EEE-FK0J221AP, EEE-FT1C221AP) support lower-volume or mixed-component assembly requirements. Packaging selection does not affect electrical or mechanical performance.

Q: Are there land size differences I should consider?

A: Most substitute parts use the standard 6.60 mm × 6.60 mm land size. The Cornell Dubilier AFK227M06D16T-F specifies 6.60 mm × 7.80 mm, which is slightly wider. This difference is minor and does not prevent PCB-level substitution for most designs, but layout verification is recommended if space is constrained.