EEE-FP0J101AV Equivalent & Substitute Parts

Part Overview

The EEE-FP0J101AV is a 100 µF, 6.3 V aluminum electrolytic capacitor in surface mount radial can package, manufactured by Panasonic Electronic Components. This component is rated for automotive applications and high temperature reflow processes, with AEC-Q200 qualification and ROHS3 compliance. The part is currently active in production with 837 units in stock.

Substitute parts are identified when equivalent electrical and mechanical parameters allow direct replacement in the same circuit application without design modification. Substitutes maintain identical capacitance, voltage rating, package dimensions, and mounting compatibility while potentially varying in series-specific characteristics such as ESR and ripple current ratings.

Substiute Parts

EEE-FP0J101AV

Panasonic Electronic ComponentsIn Stock: 943EEE-FP0J101AV Datasheet

Current PartRFQ

EEE-FK0J101AV

Panasonic Electronic ComponentsIn Stock: 1218EEE-FK0J101AV Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the EEE-FP0J101AV is determined by strict equivalence in the following parameters:

• Capacitance: 100 µF (exact match required)
• Voltage Rating: 6.3 V (exact match required)
• Tolerance: ±20% (exact match required)
• Package / Case: Radial, Can - SMD (exact match required)
• Physical Dimensions: 0.248" Dia (6.30mm), Height 0.252" (6.40mm) (exact match required)
• Surface Mount Land Size: 0.260" L x 0.260" W (6.60mm x 6.60mm) (exact match required)
• Mounting Type: Surface Mount (exact match required)
• Operating Temperature Range: -55°C ~ 105°C (exact match required)
• Lifetime Rating: 2000 Hrs @ 105°C (exact match required)
• Polarization: Polar (exact match required)
• AEC-Q200 Qualification: Required for automotive applications
• RoHS3 Compliance: Required for regulatory compliance

The EEE-FK0J101AV meets all substitution criteria and is classified as a parametric equivalent. Series-level differences (FP vs. FK) do not affect substitutability when all electrical and mechanical parameters remain equivalent.

Parameter Comparison

Engineering Selection Recommendations

Both the EEE-FP0J101AV and EEE-FK0J101AV are active production parts with full AEC-Q200 automotive qualification and ROHS3 compliance. Selection between these parts is based on application-specific ripple current and ESR requirements.

The EEE-FP0J101AV (FP series) provides lower ESR at 260 mOhm and higher ripple current ratings (195 mA @ 120 Hz, 300 mA @ 100 kHz), making it suitable for applications requiring superior high-frequency performance and lower thermal dissipation.

The EEE-FK0J101AV (FK series) operates with higher ESR at 360 mOhm and lower ripple current ratings (156 mA @ 120 Hz, 240 mA @ 100 kHz), appropriate for applications with less stringent ripple current demands.

Both parts maintain identical mechanical compatibility, thermal lifetime rating, and regulatory compliance. Part selection should be based on circuit-specific ripple current and thermal management requirements.

Frequently Asked Questions (FAQ)

Q: Can EEE-FK0J101AV replace EEE-FP0J101AV in existing designs?

A: Yes. Both parts share identical capacitance (100 µF), voltage rating (6.3 V), package dimensions, and mounting specifications. The EEE-FK0J101AV is a direct mechanical and electrical substitute. Circuit performance differences are limited to ESR and ripple current characteristics, which vary between series.

Q: What is the difference between FP and FK series designations?

A: FP and FK are Panasonic series identifiers within the anti-vibration aluminum electrolytic capacitor family. Both series meet identical electrical specifications for this 100 µF, 6.3 V rating. Series differences reflect internal construction variations that result in different ESR and ripple current performance.

Q: Are both parts suitable for automotive applications?

A: Yes. Both EEE-FP0J101AV and EEE-FK0J101AV carry AEC-Q200 qualification, confirming suitability for automotive environments. Both are ROHS3 compliant and rated for high temperature reflow processes.

Q: What does MSL 1 (Unlimited) mean for moisture sensitivity?

A: MSL 1 indicates the lowest moisture sensitivity level. These components have unlimited shelf life under standard storage conditions and do not require special moisture control measures during handling or storage.

Q: Can these parts be used interchangeably on the same PCB assembly?

A: Yes. Identical package dimensions (0.248" Dia, 0.252" height) and surface mount land size (0.260" L x 0.260" W) ensure mechanical and electrical interchangeability on the same PCB without layout modifications.

Q: Which part should be selected for high ripple current applications?

A: The EEE-FP0J101AV is specified for higher ripple current (300 mA @ 100 kHz vs. 240 mA @ 100 kHz) and lower ESR (260 mOhm vs. 360 mOhm), making it the appropriate choice for applications with elevated ripple current demands.