EEE-FC1H100P Equivalent & Substitute Parts

Part Overview

The EEE-FC1H100P is a 10 µF, 50 V aluminum electrolytic capacitor in surface mount radial can package manufactured by Panasonic Electronic Components. This component is rated for 1000 hours at 105°C and carries AEC-Q200 automotive qualification. The part is designated as Not For New Designs, indicating it has been superseded by newer alternatives within the manufacturer's product line. Identifying equivalent and substitute parts is necessary to ensure design continuity, maintain supply chain flexibility, and access components with improved performance characteristics or extended operational lifetimes.

Key Parameters

Parameter	Value
Capacitance	10 µF
Voltage Rating	50 V
Tolerance	±20%
Lifetime @ 105°C	1000 Hrs
Operating Temperature Range	-40°C ~ 105°C
Polarization	Polar
Package Type	Radial, Can - SMD
Mounting Type	Surface Mount
Case Dimensions	0.248" Dia (6.30mm)
Height (Max)	0.213" (5.40mm)
Land Size	0.260" L x 0.260" W (6.60mm x 6.60mm)
RoHS Status	RoHS Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the EEE-FC1H100P is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

Capacitance: 10 µF (exact match required)
Voltage Rating: 50 V (exact match required)
Tolerance: ±20% (exact match required)
Polarization: Polar (exact match required)
Package Type: Radial, Can - SMD (exact match required)
Mounting Type: Surface Mount (exact match required)
Land Size: 0.260" L x 0.260" W (6.60mm x 6.60mm) (exact match required)
Moisture Sensitivity Level: 1 (Unlimited) (exact match required)

Allowable Variation Parameters:

Lifetime @ 105°C: May be equal or greater than 1000 hours
Height (Seated Max): May vary within PCB assembly constraints (5.40mm baseline)
Operating Temperature Range: May be equal or extended
Ripple Current: May vary based on application requirements
Impedance: May vary based on application requirements
RoHS/REACH Compliance: Must maintain or exceed current compliance status

Substitute parts are grouped into four categories: Upgrade (improved lifetime or performance), Similar (extended lifetime with same footprint), Parametric Equivalent (same electrical specifications, different manufacturer), and Direct (alternative manufacturer with equivalent ratings).

Parameter Comparison

Part Number	Manufacturer	Series	Capacitance	Voltage	Tolerance	Lifetime @ 105°C	Height (Max)	Product Status	Packaging
EEE-FC1H100P	Panasonic	FC	10 µF	50 V	±20%	1000 Hrs	0.213" (5.40mm)	Not For New Designs	Tape & Reel
EEE-HB1H100AP	Panasonic	HB	10 µF	50 V	±20%	2000 Hrs	0.228" (5.80mm)	Active	Cut Tape & Digi-Reel
EEE-HB1H100P	Panasonic	HB	10 µF	50 V	±20%	2000 Hrs	0.228" (5.80mm)	Active	Tape & Reel
EEE-HD1H100P	Panasonic	HD	10 µF	50 V	±20%	5000 Hrs	0.240" (6.10mm)	Active	Tape & Reel
EEE-HA1H100AP	Panasonic	HA	10 µF	50 V	±20%	1000 Hrs	0.213" (5.40mm)	Not For New Designs	Tape & Reel
EEE-HA1H100P	Panasonic	HA	10 µF	50 V	±20%	1000 Hrs	0.213" (5.40mm)	Not For New Designs	Tape & Reel
EMVE500ARA100MF55G	Chemi-Con	Alchip™- MVE	10 µF	50 V	±20%	1000 Hrs	0.205" (5.20mm)	Active	Tape & Reel
TYEH1H106F55MTR	TE Connectivity	TYEH, Neohm	10 µF	50 V	±20%	1000 Hrs	0.209" (5.30mm)	Active	Tape & Reel
EDH106M050S9GAA	KEMET	EDH	10 µF	50 V	±20%	2000 Hrs	0.222" (5.65mm)	Active	Tape & Reel
EEV106M050S9GAA	KEMET	EEV	10 µF	50 V	±20%	2000 Hrs	0.222" (5.65mm)	Active	Tape & Reel
EMVY500ARA100MF55G	Chemi-Con	Alchip™- MVY	10 µF	50 V	±20%	1000 Hrs	0.205" (5.20mm)	Active	Tape & Reel

Engineering Selection Recommendations

For Active Product Status Requirement: If design specifications mandate active product status, select from: EEE-HB1H100AP, EEE-HB1H100P, EEE-HD1H100P, EMVE500ARA100MF55G, TYEH1H106F55MTR, EDH106M050S9GAA, EEV106M050S9GAA, or EMVY500ARA100MF55G. The EEE-FC1H100P is designated Not For New Designs and should not be selected for new applications.

For Extended Operational Lifetime: The EEE-HD1H100P offers 5000 hours at 105°C, providing the longest operational lifetime among Panasonic alternatives. EDH106M050S9GAA, EEV106M050S9GAA, and EEE-HB series components provide 2000 hours at 105°C, doubling the baseline 1000-hour specification.

For AEC-Q200 Automotive Compliance: EEE-FC1H100P, EEE-HB1H100AP, EEE-HB1H100P, EEE-HD1H100P, EEE-HA1H100AP, EEE-HA1H100P, EDH106M050S9GAA, and EEV106M050S9GAA carry AEC-Q200 ratings. EMVE500ARA100MF55G, TYEH1H106F55MTR, and EMVY500ARA100MF55G do not list AEC-Q200 certification.

For RoHS3 Compliance: EEE-HB1H100AP, EEE-HB1H100P, EEE-HD1H100P, EDH106M050S9GAA, EEV106M050S9GAA, EMVE500ARA100MF55G, and EMVY500ARA100MF55G are ROHS3 Compliant. EEE-FC1H100P, EEE-HA1H100AP, EEE-HA1H100P, and TYEH1H106F55MTR are RoHS Compliant (earlier standard).

For Extended Temperature Range: EMVY500ARA100MF55G and EEV106M050S9GAA support -55°C ~ 105°C operating range, compared to the standard -40°C ~ 105°C range of other alternatives.

For PCB Space Constraints: EMVE500ARA100MF55G and EMVY500ARA100MF55G offer the smallest height at 0.205" (5.20mm), compared to the baseline 0.213" (5.40mm). EEE-HD1H100P has the largest height at 0.240" (6.10mm) and may require PCB layout verification.

Frequently Asked Questions (FAQ)

Q: Can EEE-FC1H100P be directly replaced with EEE-HA1H100P? A: Yes. Both parts share identical electrical specifications (10 µF, 50 V, ±20%, 1000 Hrs @ 105°C), polarization, package type, and land size. Both are designated Not For New Designs. Physical height is identical at 0.213" (5.40mm). Direct substitution is electrically and mechanically compatible.

Q: What is the primary advantage of upgrading to EEE-HB1H100P? A: The EEE-HB1H100P doubles the operational lifetime to 2000 hours at 105°C while maintaining identical electrical specifications and land size. It carries Active product status and ROHS3 compliance, making it suitable for new designs. Height increases to 0.228" (5.80mm), requiring PCB layout verification.

Q: Is EEE-HD1H100P compatible with the original EEE-FC1H100P footprint? A: Electrical and land size compatibility is confirmed. However, height increases from 0.213" (5.40mm) to 0.240" (6.10mm). PCB assembly clearance must be verified before substitution. The EEE-HD1H100P offers 5000 hours at 105°C and Active product status.

Q: Can non-Panasonic alternatives be used as direct substitutes? A: EMVE500ARA100MF55G (Chemi-Con), TYEH1H106F55MTR (TE Connectivity), EDH106M050S9GAA (KEMET), EEV106M050S9GAA (KEMET), and EMVY500ARA100MF55G (Chemi-Con) meet the mandatory electrical and mechanical parameters. However, AEC-Q200 automotive certification is not listed for Chemi-Con and TE Connectivity parts. KEMET alternatives carry AEC-Q200 ratings. Supplier qualification and design validation are required before implementation.

Q: What packaging options are available? A: EEE-FC1H100P is supplied in Tape & Reel (TR) packaging. EEE-HB1H100AP is available in Cut Tape (CT) & Digi-Reel® packaging. All other alternatives are supplied in Tape & Reel (TR) format. Packaging selection affects procurement and assembly processes.

Q: Are there height restrictions for substitution? A: Yes. The baseline height is 0.213" (5.40mm). Alternatives range from 0.205" (5.20mm) to 0.240" (6.10mm). Taller components (EEE-HD1H100P at 0.240") may conflict with PCB assembly constraints. Shorter components (EMVE500ARA100MF55G and EMVY500ARA100MF55G at 0.205") provide additional clearance. PCB layout must be verified for each substitution.

Q: Which substitute offers the best compliance profile for automotive applications? A: EEE-HB1H100P, EEE-HD1H100P, EDH106M050S9GAA, and EEV106M050S9GAA all carry AEC-Q200 automotive qualification and ROHS3 compliance. EEE-HB1H100P and EEE-HD1H100P are Panasonic products with established automotive supply chains. EDH106M050S9GAA and EEV106M050S9GAA are KEMET alternatives with equivalent certifications.

Q: What is the difference between EEE-HA and EEE-HB series? A: Both series share identical electrical specifications (10 µF, 50 V, ±20%). EEE-HA is designated Not For New Designs with 1000 hours at 105°C. EEE-HB is Active with 2000 hours at 105°C. Height is identical at 0.213" (5.40mm) for EEE-HA1H100P and 0.228" (5.80mm) for EEE-HB1H100P. EEE-HB is the recommended upgrade path.

Q: Can EMVY500ARA100MF55G be used in applications requiring -55°C minimum temperature? A: Yes. EMVY500ARA100MF55G supports -55°C ~ 105°C operating range, compared to the standard -40°C ~ 105°C of EEE-FC1H100P. However, AEC-Q200 automotive certification is not listed. Extended temperature capability must be balanced against compliance requirements for the specific application.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message