Panasonic EEE-FC1C470AP Equivalent & Substitute Parts

Part Overview

The Panasonic EEE-FC1C470AP is a 47 µF, 16 V aluminum electrolytic capacitor in surface mount radial can package, rated for 1000 hours at 105°C. This component is classified as "Not For New Designs," indicating it has been superseded in Panasonic's product portfolio. For new applications or long-term supply assurance, equivalent substitute parts with improved specifications or active product status are available within the same physical footprint and electrical rating class.

Key Parameters

Parameter	EEE-FC1C470AP
Capacitance	47 µF
Voltage Rating	16 V
Tolerance	±20%
Lifetime @ 105°C	1000 Hrs
Operating Temperature Range	-40°C ~ 105°C
Package / Case	Radial, Can - SMD
Size / Dimension	0.248" Dia (6.30mm)
Height - Seated (Max)	0.213" (5.40mm)
Surface Mount Land Size	0.260" L x 0.260" W (6.60mm x 6.60mm)
Mounting Type	Surface Mount
Ripple Current @ 120 Hz	105 mA
Ripple Current @ 100 kHz	140 mA
Impedance	1 Ohm
AEC-Q200 Rating	Yes
RoHS Status	RoHS Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the EEE-FC1C470AP is determined by the following critical parameters:

Mandatory Compatibility Parameters:

Capacitance: 47 µF (exact match required)
Voltage Rating: 16 V minimum (higher voltage ratings are acceptable as upgrades)
Tolerance: ±20% (standard tolerance class)
Package / Case: Radial, Can - SMD (physical footprint compatibility)
Surface Mount Land Size: 0.260" L x 0.260" W (6.60mm x 6.60mm)
Mounting Type: Surface Mount
Polarization: Polar

Performance Enhancement Parameters:

Lifetime @ 105°C: 1000 Hrs or higher
Operating Temperature Range: -40°C ~ 105°C or wider
Ripple Current Ratings: Equal to or greater than specified values
ESR (Equivalent Series Resistance): Lower values indicate improved performance

Compliance Parameters:

AEC-Q200 Automotive Rating: Required for automotive applications
RoHS Status: RoHS Compliant or ROHS3 Compliant
Moisture Sensitivity Level: 1 (Unlimited)

Substitute parts are grouped into two categories: direct replacements maintaining identical electrical and thermal specifications, and performance upgrades offering extended lifetime, lower ESR, or higher voltage ratings while maintaining physical compatibility.

Parameter Comparison

Parameter	EEE-FC1C470AP	EEE-FC1C470P	EEE-FP1C470AP	EEE-FP1E470AP	EEE-FP1V470AP	EEE-HA1C470AP	EEE-HA1C470P	EEE-HA1E470WP	EEE-HAE470WAP	EEE-HB1C470AP	EEE-HB1C470P
Capacitance	47 µF	47 µF	47 µF	47 µF	47 µF	47 µF	47 µF	47 µF	47 µF	47 µF	47 µF
Voltage Rating	16 V	16 V	16 V	25 V	35 V	16 V	16 V	25 V	25 V	16 V	16 V
Tolerance	±20%	±20%	±20%	±20%	±20%	±20%	±20%	±20%	±20%	±20%	±20%
Lifetime @ 105°C	1000 Hrs	1000 Hrs	2000 Hrs	2000 Hrs	2000 Hrs	1000 Hrs	1000 Hrs	1000 Hrs	1000 Hrs	2000 Hrs	2000 Hrs
Operating Temperature	-40°C ~ 105°C	-40°C ~ 105°C	-55°C ~ 105°C	-55°C ~ 105°C	-55°C ~ 105°C	-40°C ~ 105°C	-40°C ~ 105°C	-40°C ~ 105°C	-40°C ~ 105°C	-40°C ~ 105°C	-40°C ~ 105°C
ESR @ 100 kHz	Not Specified	Not Specified	260 mOhm	260 mOhm	260 mOhm	Not Specified	Not Specified	Not Specified	Not Specified	Not Specified	Not Specified
Ripple Current @ 120 Hz	105 mA	105 mA	195 mA	195 mA	195 mA	70 mA	70 mA	70 mA	70 mA	70 mA	70 mA
Ripple Current @ 100 kHz	140 mA	140 mA	300 mA	300 mA	300 mA	119 mA @ 10 kHz	119 mA @ 10 kHz	119 mA @ 10 kHz	119 mA @ 10 kHz	119 mA @ 10 kHz	119 mA @ 10 kHz
Size / Dimension	0.248" Dia (6.30mm)	0.248" Dia (6.30mm)	0.248" Dia (6.30mm)	0.248" Dia (6.30mm)	0.248" Dia (6.30mm)	0.248" Dia (6.30mm)	0.248" Dia (6.30mm)	0.248" Dia (6.30mm)	0.248" Dia (6.30mm)	0.248" Dia (6.30mm)	0.248" Dia (6.30mm)
Height - Seated (Max)	0.213" (5.40mm)	0.213" (5.40mm)	0.228" (5.80mm)	0.228" (5.80mm)	0.228" (5.80mm)	0.213" (5.40mm)	0.213" (5.40mm)	0.213" (5.40mm)	0.213" (5.40mm)	0.228" (5.80mm)	0.228" (5.80mm)
Surface Mount Land Size	0.260" L x 0.260" W (6.60mm x 6.60mm)	0.260" L x 0.260" W (6.60mm x 6.60mm)	0.260" L x 0.260" W (6.60mm x 6.60mm)	0.260" L x 0.260" W (6.60mm x 6.60mm)	0.260" L x 0.260" W (6.60mm x 6.60mm)	0.260" L x 0.260" W (6.60mm x 6.60mm)	0.260" L x 0.260" W (6.60mm x 6.60mm)	0.260" L x 0.260" W (6.60mm x 6.60mm)	0.260" L x 0.260" W (6.60mm x 6.60mm)	0.260" L x 0.260" W (6.60mm x 6.60mm)	0.260" L x 0.260" W (6.60mm x 6.60mm)
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount
Package / Case	Radial, Can - SMD	Radial, Can - SMD	Radial, Can - SMD	Radial, Can - SMD	Radial, Can - SMD	Radial, Can - SMD	Radial, Can - SMD	Radial, Can - SMD	Radial, Can - SMD	Radial, Can - SMD	Radial, Can - SMD
Product Status	Not For New Designs	Not For New Designs	Active	Active	Active	Not For New Designs	Not For New Designs	Not For New Designs	Active	Active	Active
RoHS Status	RoHS Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
AEC-Q200 Rating	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)

Engineering Selection Recommendations

Direct Replacement (Same Specifications): EEE-FC1C470P maintains identical electrical and thermal characteristics to the EEE-FC1C470AP. Both are classified as "Not For New Designs," making this substitution suitable only for legacy system maintenance or repair applications where existing inventory must be matched.

Performance Upgrade with Active Status: The EEE-HB1C470AP and EEE-HB1C470P series offer doubled thermal lifetime (2000 Hrs @ 105°C versus 1000 Hrs) while maintaining the same 16 V rating, physical footprint, and automotive AEC-Q200 compliance. Both carry Active product status, ensuring long-term availability. Height increases from 5.40mm to 5.80mm; verify PCB clearance before substitution.

Enhanced Performance with Extended Temperature Range: The EEE-FP1C470AP series provides 2000 Hrs @ 105°C lifetime, extended operating temperature range (-55°C ~ 105°C), specified ESR of 260 mOhm @ 100 kHz, and doubled ripple current ratings (195 mA @ 120 Hz, 300 mA @ 100 kHz). Product status is Active. Height increases to 5.80mm. This series is recommended for new designs requiring improved thermal and electrical performance.

Voltage Upgrade Options: EEE-FP1E470AP (25 V) and EEE-FP1V470AP (35 V) provide higher voltage ratings with identical capacitance, tolerance, and enhanced performance specifications. These are suitable for applications requiring voltage margin or operating in higher voltage environments. Both maintain Active product status and AEC-Q200 compliance.

Lower Ripple Current Alternative: EEE-HA1C470AP and EEE-HA1C470P series maintain 1000 Hrs @ 105°C lifetime but feature reduced ripple current ratings (70 mA @ 120 Hz, 119 mA @ 10 kHz). These are suitable only for low-ripple applications and are classified as "Not For New Designs."

Active Product with Voltage Upgrade: EEE-HAE470WAP offers Active product status with 25 V rating, 1000 Hrs @ 105°C lifetime, and identical physical footprint. This provides a path to active product status for applications tolerating the lower ripple current specification.

Frequently Asked Questions (FAQ)

Q: Can I substitute EEE-FC1C470AP with a higher voltage rated part? A: Yes. Higher voltage ratings (25 V or 35 V) are electrically compatible in circuits designed for 16 V operation. The EEE-FP1E470AP (25 V) and EEE-FP1V470AP (35 V) maintain identical capacitance and tolerance while providing voltage margin. Verify PCB layout accommodates the increased height (5.80mm versus 5.40mm).

Q: What is the difference between "Not For New Designs" and "Active" product status? A: "Not For New Designs" indicates the part is in end-of-life phase with limited future availability. "Active" status guarantees ongoing production and supply. For new designs, select only Active status parts: EEE-FP series, EEE-HAE470WAP, or EEE-HB series.

Q: Are all substitute parts AEC-Q200 rated? A: Yes. All listed substitute parts carry AEC-Q200 automotive qualification, maintaining compliance for automotive applications.

Q: What is the significance of ESR specification? A: Equivalent Series Resistance (ESR) affects ripple current handling and thermal performance. EEE-FP series parts specify 260 mOhm @ 100 kHz, indicating lower impedance and improved high-frequency performance compared to parts without specified ESR values.

Q: Can I use EEE-HA1C470AP as a direct replacement? A: EEE-HA1C470AP is electrically compatible but features reduced ripple current ratings (70 mA @ 120 Hz versus 105 mA). Use only if your application operates within these lower ripple current limits. Both are "Not For New Designs" status.

Q: What is the height difference between substitute parts? A: EEE-FC1C470AP and EEE-HA series have 5.40mm seated height. EEE-FP and EEE-HB series have 5.80mm seated height. Verify PCB clearance and component placement before substitution.

Q: Which substitute offers the best long-term availability? A: EEE-FP1C470AP, EEE-FP1E470AP, EEE-FP1V470AP, EEE-HAE470WAP, EEE-HB1C470AP, and EEE-HB1C470P all carry Active product status. Among these, EEE-FP series offers the highest performance specifications with extended temperature range and specified ESR.

Q: Are all parts RoHS compliant? A: Yes. EEE-FC1C470AP and EEE-HA series are RoHS Compliant. EEE-FP, EEE-HAE470WAP, and EEE-HB series are ROHS3 Compliant, meeting the most current RoHS requirements.

Q: Can I substitute based on capacitance and voltage alone? A: No. Physical footprint, height, ripple current ratings, and thermal lifetime must also match application requirements. Verify all parameters in the comparison table before substitution.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message