EEE-FC0J101P Equivalent & Substitute Parts

Part Overview

The Panasonic EEE-FC0J101P is a 100 µF, 6.3 V aluminum electrolytic capacitor in surface mount radial can package, rated for 1000 hours at 105°C with AEC-Q200 automotive qualification. This part carries a "Not For New Designs" status, indicating it has been superseded in Panasonic's product portfolio. Identifying equivalent and substitute parts is necessary for design continuity, inventory management, and sourcing optimization when the original part becomes unavailable or when design requirements demand enhanced performance characteristics such as extended lifetime, improved ripple current handling, or higher voltage ratings.

Key Parameters

Parameter	Value
Capacitance	100 µF
Voltage Rating	6.3 V
Tolerance	±20%
Lifetime @ 105°C	1000 Hrs
Operating Temperature Range	-40°C ~ 105°C
Ripple Current @ 120 Hz	105 mA
Ripple Current @ 100 kHz	140 mA
Impedance	1 Ohm
Package Type	Radial, Can - SMD
Case Size	0.248" Dia (6.30mm)
Height	0.213" (5.40mm)
Land Size	0.260" L x 0.260" W (6.60mm x 6.60mm)
Mounting Type	Surface Mount
RoHS Status	RoHS Compliant
AEC-Q200 Rating	Yes
MSL Rating	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the EEE-FC0J101P is determined by strict adherence to the following electrical and mechanical parameters:

Primary Substitution Criteria (Must Match):

Capacitance: 100 µF
Voltage Rating: 6.3 V (or higher for voltage-upgraded variants)
Tolerance: ±20%
Package Type: Radial, Can - SMD
Case Diameter: 0.248" (6.30mm)
Land Size: 0.260" L x 0.260" W (6.60mm x 6.60mm)
Mounting Type: Surface Mount
Polarization: Polar
AEC-Q200 Automotive Rating: Required
RoHS Compliance: Required
MSL Rating: 1 (Unlimited)

Secondary Performance Parameters (May Vary):

Lifetime @ 105°C: 1000 Hrs (baseline) to 2000 Hrs (enhanced)
Operating Temperature Range: -40°C ~ 105°C (baseline) to -55°C ~ 105°C (extended)
Ripple Current Ratings: May increase with higher-performance series
ESR: Specified in advanced series, unspecified in baseline series
Height: 0.213" (5.40mm) baseline to 0.228" (5.80mm) for extended-life variants
Product Status: Active or Not For New Designs

Substitute parts are grouped into three categories: direct equivalents (same voltage, same lifetime), voltage-upgraded variants (higher voltage rating, same capacitance), and performance-enhanced variants (extended lifetime, improved ripple current, lower ESR).

Parameter Comparison

Part Number	Series	Capacitance	Voltage	Lifetime @ 105°C	Height (Max)	Ripple @ 120 Hz	Ripple @ 100 kHz	ESR @ 100 kHz	Product Status	RoHS
EEE-FC0J101P	FC	100 µF	6.3 V	1000 Hrs	0.213" (5.40mm)	105 mA	140 mA	—	Not For New Designs	RoHS Compliant
EEE-FC0J101AP	FC	100 µF	6.3 V	1000 Hrs	0.213" (5.40mm)	105 mA	140 mA	—	Not For New Designs	RoHS Compliant
EEE-FP0J101AP	FP	100 µF	6.3 V	2000 Hrs	0.228" (5.80mm)	195 mA	300 mA	260 mOhm	Active	ROHS3 Compliant
EEE-FP1C101AP	FP	100 µF	16 V	2000 Hrs	0.228" (5.80mm)	195 mA	300 mA	260 mOhm	Active	ROHS3 Compliant
EEE-HA1A101WP	HA	100 µF	10 V	1000 Hrs	0.213" (5.40mm)	71 mA	120.7 mA	—	Not For New Designs	RoHS Compliant
EEE-HA1C101WP	HA	100 µF	16 V	1000 Hrs	0.213" (5.40mm)	70 mA	119 mA	—	Not For New Designs	RoHS Compliant
EEE-HAA101WAP	HA	100 µF	10 V	1000 Hrs	0.213" (5.40mm)	71 mA	120.7 mA	—	Active	ROHS3 Compliant
EEE-HAC101WAP	HA	100 µF	16 V	1000 Hrs	0.213" (5.40mm)	70 mA	119 mA	—	Active	ROHS3 Compliant
EEE-HB0J101AP	HB	100 µF	6.3 V	2000 Hrs	0.228" (5.80mm)	71 mA	120.7 mA	—	Active	ROHS3 Compliant
EEE-HB0J101P	HB	100 µF	6.3 V	2000 Hrs	0.228" (5.80mm)	71 mA	120.7 mA	—	Active	ROHS3 Compliant
EEE-HBA101UAP	HB	100 µF	10 V	2000 Hrs	0.228" (5.80mm)	71 mA	120.7 mA	—	Active	ROHS3 Compliant

Engineering Selection Recommendations

Direct Equivalent (Same Voltage, Same Lifetime): EEE-FC0J101AP is a direct equivalent to EEE-FC0J101P, maintaining identical electrical specifications and physical dimensions. Both parts carry "Not For New Designs" status and are suitable for replacement in existing designs requiring no performance enhancement.

Performance-Enhanced Substitutes (Same Voltage, Extended Lifetime): EEE-HB0J101AP and EEE-HB0J101P offer doubled lifetime (2000 Hrs @ 105°C) while maintaining 6.3 V rating and identical case dimensions. These parts carry Active product status and ROHS3 compliance, making them preferred for new designs or when extended operational life is required. Height increases from 0.213" to 0.228", requiring PCB layout verification.

EEE-FP0J101AP provides the highest performance tier with 2000 Hrs lifetime, 260 mOhm ESR specification, and significantly improved ripple current ratings (195 mA @ 120 Hz, 300 mA @ 100 kHz). Active product status and ROHS3 compliance apply. Height increases to 0.228".

Voltage-Upgraded Substitutes (Higher Voltage Rating): EEE-HA1A101WP and EEE-HAA101WAP provide 10 V rating with 100 µF capacitance and 1000 Hrs lifetime. EEE-HAA101WAP carries Active status and ROHS3 compliance. These are suitable when circuit voltage margins require upgrade from 6.3 V.

EEE-HA1C101WP and EEE-HAC101WAP provide 16 V rating with 100 µF capacitance and 1000 Hrs lifetime. EEE-HAC101WAP carries Active status and ROHS3 compliance. These are suitable for maximum voltage margin applications.

EEE-FP1C101AP combines 16 V rating with extended 2000 Hrs lifetime and 260 mOhm ESR specification. Active product status and ROHS3 compliance apply.

Packaging Consideration: EEE-HBA101UAP is supplied in Cut Tape (CT) & Digi-Reel® packaging rather than standard Tape & Reel (TR), affecting procurement and assembly processes.

Frequently Asked Questions (FAQ)

Q: Can EEE-FC0J101AP be used as a direct replacement for EEE-FC0J101P? A: Yes. EEE-FC0J101AP is electrically and mechanically identical to EEE-FC0J101P, with matching 100 µF capacitance, 6.3 V rating, 1000 Hrs lifetime, and identical physical dimensions. Both parts are rated for automotive applications with AEC-Q200 qualification.

Q: What is the primary reason to upgrade from EEE-FC0J101P to EEE-HB0J101AP or EEE-FP0J101AP? A: The primary reason is extended operational lifetime. EEE-HB0J101AP and EEE-FP0J101AP both provide 2000 Hrs @ 105°C, doubling the 1000 Hrs rating of the original part. Additionally, both carry Active product status, ensuring long-term availability. EEE-FP0J101AP adds improved ripple current handling and specified ESR performance.

Q: Are there height differences between substitute parts? A: Yes. EEE-FC0J101P and EEE-FC0J101AP have a maximum seated height of 0.213" (5.40mm). EEE-HB0J101AP, EEE-HB0J101P, EEE-FP0J101AP, and EEE-FP1C101AP have a maximum seated height of 0.228" (5.80mm). PCB layout and component clearance must be verified before substitution.

Q: Can I use a higher voltage-rated part as a substitute? A: Yes, provided all other parameters match. Higher voltage ratings provide additional safety margin and are electrically compatible in circuits designed for lower voltages. EEE-HA1A101WP (10 V) and EEE-HA1C101WP (16 V) are suitable substitutes for 6.3 V applications. EEE-FP1C101AP (16 V) combines higher voltage with extended lifetime.

Q: What is the difference between RoHS and ROHS3 compliance? A: Both designations indicate compliance with Restriction of Hazardous Substances regulations. ROHS3 represents the current standard. Parts marked ROHS3 Compliant (EEE-FP0J101AP, EEE-HB0J101AP, EEE-HB0J101P, EEE-HAA101WAP, EEE-HAC101WAP) are preferred for new designs to ensure compliance with current regulatory requirements.

Q: Why do some substitute parts have lower ripple current ratings than the original? A: Ripple current ratings vary by series design. EEE-HA series parts (EEE-HA1A101WP, EEE-HA1C101WP, EEE-HAA101WAP, EEE-HAC101WAP) specify lower ripple current (70–71 mA @ 120 Hz, 119–120.7 mA @ 10 kHz) compared to EEE-FC0J101P (105 mA @ 120 Hz, 140 mA @ 100 kHz). Circuit ripple current requirements must be verified before substitution.

Q: What does "Not For New Designs" status mean? A: This designation indicates the part has been superseded in Panasonic's portfolio and is no longer recommended for new product development. Parts with this status remain available for existing designs but should be replaced with Active-status alternatives when possible. EEE-HB0J101AP, EEE-HB0J101P, EEE-FP0J101AP, EEE-HAA101WAP, and EEE-HAC101WAP carry Active status.

Q: Is EEE-HBA101UAP compatible with standard pick-and-place assembly? A: EEE-HBA101UAP is supplied in Cut Tape (CT) & Digi-Reel® packaging rather than standard Tape & Reel (TR). This affects feeder compatibility and assembly line setup. Verify packaging compatibility with your assembly process before selecting this part.

Q: Can I substitute EEE-FP0J101AP for EEE-FC0J101P without circuit redesign? A: Electrical substitution is valid: both parts are 100 µF, 6.3 V, AEC-Q200 rated, and have identical land sizes. However, physical height increases from 0.213" to 0.228", requiring PCB layout verification. EEE-FP0J101AP also specifies 260 mOhm ESR, which may affect circuit performance in sensitive applications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message