EEE-FC0J101AP Equivalent & Substitute Parts

Part Overview

The EEE-FC0J101AP is a 100 µF, 6.3 V aluminum electrolytic capacitor in surface mount radial can package manufactured by Panasonic Electronic Components. This part is classified as "Not For New Designs," indicating it has been superseded in the product lifecycle. The FC series offers a 1000-hour lifetime rating at 105°C with AEC-Q200 automotive qualification. Due to its obsolescence status, equivalent substitute parts with improved specifications or active production status are necessary for ongoing design support and procurement continuity.

Key Parameters

Parameter	Value
Capacitance	100 µF
Voltage Rating	6.3 V
Tolerance	±20%
Lifetime @ 105°C	1000 Hrs
Operating Temperature Range	-40°C ~ 105°C
Package Type	Radial, Can - SMD
Case Size	0.248" Dia (6.30mm)
Height	0.213" (5.40mm)
Mounting Type	Surface Mount
Polarization	Polar
RoHS Status	RoHS Compliant
AEC-Q200 Rating	Yes

Substitute Part Grouping Explanation

Substitution eligibility for the EEE-FC0J101AP is determined by the following criteria:

Primary Substitution Parameters:

Capacitance: 100 µF (exact match required)
Voltage Rating: 6.3 V minimum (equal or higher voltage acceptable)
Package Type: Radial, Can - SMD (identical footprint and mounting)
Case Dimensions: 0.248" Dia × 0.213" Height maximum (physical compatibility)
Surface Mount Land Size: 0.260" L × 0.260" W (PCB layout compatibility)
Polarization: Polar (electrical requirement)
RoHS Compliance: Required for automotive applications

Secondary Considerations:

Lifetime rating at 105°C (1000 Hrs minimum acceptable)
Operating temperature range (-40°C ~ 105°C minimum)
AEC-Q200 qualification (automotive standard)
Product status (Active preferred over "Not For New Designs")

Substitute parts are grouped into two categories:

Category A - Direct Equivalents (Same Voltage, Same Lifetime): Parts maintaining 6.3 V rating and 1000-hour lifetime with identical physical dimensions.

Category B - Enhanced Substitutes (Same Voltage, Improved Lifetime or Performance): Parts with 6.3 V rating but extended lifetime (2000 Hrs) or improved electrical characteristics, with compatible physical dimensions.

Category C - Voltage-Upgraded Substitutes (Higher Voltage Rating): Parts with 10 V or 16 V ratings suitable for applications where the original 6.3 V specification allows voltage derating, maintaining identical physical footprint.

Parameter Comparison

Part Number	Capacitance	Voltage	Tolerance	Lifetime @ 105°C	Operating Temp	Height (Max)	Product Status	RoHS
EEE-FC0J101AP	100 µF	6.3 V	±20%	1000 Hrs	-40°C ~ 105°C	0.213" (5.40mm)	Not For New Designs	RoHS Compliant
EEE-FC0J101P	100 µF	6.3 V	±20%	1000 Hrs	-40°C ~ 105°C	0.213" (5.40mm)	Not For New Designs	RoHS Compliant
EEE-FP0J101AP	100 µF	6.3 V	±20%	2000 Hrs	-55°C ~ 105°C	0.228" (5.80mm)	Active	ROHS3 Compliant
EEE-FP1C101AP	100 µF	16 V	±20%	2000 Hrs	-55°C ~ 105°C	0.228" (5.80mm)	Active	ROHS3 Compliant
EEE-HA0J101P	100 µF	6.3 V	±20%	1000 Hrs	-40°C ~ 105°C	0.213" (5.40mm)	Not For New Designs	RoHS Compliant
EEE-HA1A101WP	100 µF	10 V	±20%	1000 Hrs	-40°C ~ 105°C	0.213" (5.40mm)	Not For New Designs	RoHS Compliant
EEE-HA1C101WP	100 µF	16 V	±20%	1000 Hrs	-40°C ~ 105°C	0.213" (5.40mm)	Not For New Designs	RoHS Compliant
EEE-HAA101WAP	100 µF	10 V	±20%	1000 Hrs	-40°C ~ 105°C	0.213" (5.40mm)	Active	ROHS3 Compliant
EEE-HAC101WAP	100 µF	16 V	±20%	1000 Hrs	-40°C ~ 105°C	0.213" (5.40mm)	Active	ROHS3 Compliant
EEE-HB0J101AP	100 µF	6.3 V	±20%	2000 Hrs	-40°C ~ 105°C	0.228" (5.80mm)	Active	ROHS3 Compliant
EEE-HB0J101P	100 µF	6.3 V	±20%	2000 Hrs	-40°C ~ 105°C	0.228" (5.80mm)	Active	ROHS3 Compliant

Engineering Selection Recommendations

For Direct Replacement (Same Specifications, Active Status):

EEE-HB0J101AP and EEE-HB0J101P are the primary recommended substitutes. Both maintain the 100 µF, 6.3 V specification with identical electrical performance to the original EEE-FC0J101AP. The HB series offers extended 2000-hour lifetime at 105°C compared to the FC series 1000-hour rating, providing improved reliability margin. Both parts carry Active product status and ROHS3 compliance, making them suitable for new designs. Physical height increases from 0.213" to 0.228", which must be verified for PCB clearance compatibility.

For Enhanced Performance (Same Voltage, Improved Specifications):

EEE-FP0J101AP provides superior electrical characteristics with 260 mOhm ESR at 100 kHz, extended 2000-hour lifetime, and expanded operating temperature range (-55°C to 105°C). The FP series is Active status with ROHS3 compliance. Height increases to 0.228", requiring PCB layout verification. This option is suitable when improved thermal performance or lower impedance is beneficial.

For Voltage-Derating Applications (Higher Voltage Rating):

EEE-HAA101WAP (10 V) and EEE-HAC101WAP (16 V) are Active status alternatives with ROHS3 compliance. These parts maintain identical physical dimensions to the original (0.213" height) and are suitable for applications where circuit voltage permits derating. The 10 V and 16 V ratings provide additional safety margin in circuits operating below their rated voltage.

For Procurement Continuity (Same Series, Active Status):

EEE-FC0J101P maintains identical specifications to EEE-FC0J101AP but carries Active product status, ensuring continued availability. This option provides the closest functional match with improved lifecycle support.

Frequently Asked Questions (FAQ)

Q: Can EEE-FP0J101AP replace EEE-FC0J101AP directly on the PCB?

A: Electrical substitution is valid. However, the height increases from 5.40 mm to 5.80 mm. PCB clearance must be verified to ensure no component interference with adjacent parts or enclosure constraints.

Q: What is the difference between EEE-HB0J101AP and EEE-HB0J101P?

A: Both parts are electrically and physically identical with 100 µF, 6.3 V, 2000-hour lifetime specifications. The difference is packaging designation; both are suitable for tape and reel surface mount assembly.

Q: Is EEE-HA1A101WP a suitable substitute for 6.3 V applications?

A: EEE-HA1A101WP is rated for 10 V, which is higher than the original 6.3 V specification. It is suitable only if the circuit voltage is 10 V or lower. The part maintains identical physical dimensions and is compatible with the original PCB layout.

Q: Why do some substitutes have different heights?

A: The FC and HA series use 5.40 mm height, while FP and HB series use 5.80 mm height. This reflects different internal construction and performance characteristics. Height differences must be evaluated against PCB clearance and assembly constraints.

Q: Are all listed substitutes AEC-Q200 qualified?

A: Yes. All substitute parts listed carry AEC-Q200 automotive qualification, meeting the same reliability and qualification standards as the original EEE-FC0J101AP.

Q: What is the advantage of Active status parts over "Not For New Designs" parts?

A: Active status parts have guaranteed long-term availability and continued manufacturing support. "Not For New Designs" parts are in end-of-life phase with limited stock and no new production commitments. For new designs, Active status parts are preferred.

Q: Can EEE-FP1C101AP (16 V) be used in place of EEE-FC0J101AP (6.3 V)?

A: Electrical substitution is valid if circuit voltage is 6.3 V or lower. The 16 V rating provides voltage derating margin. Physical height increases to 5.80 mm, requiring PCB clearance verification. Product status is Active with ROHS3 compliance.

Q: What does ROHS3 compliance mean compared to RoHS Compliant?

A: ROHS3 represents the current RoHS 3 directive compliance standard. Both designations indicate restriction of hazardous substances. ROHS3 is the current standard for new products; parts marked as "RoHS Compliant" may reference earlier RoHS versions but remain compliant with current regulations.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message