Equivalent & Substitute Parts for EEE-0JA470SR

Part Overview

The EEE-0JA470SR is a 47 µF, 6.3 V aluminum electrolytic capacitor in surface mount radial can package manufactured by Panasonic Electronic Components. This part operates across -40°C to 85°C with a rated lifetime of 2000 hours at 85°C and carries AEC-Q200 automotive qualification. The product status is Not For New Designs, making substitute parts with active status preferable for ongoing development and production applications.

Key Parameters

Parameter	Value
Capacitance	47 µF
Tolerance	±20%
Voltage - Rated	6.3 V
Lifetime @ Temperature	2000 Hrs @ 85°C
Operating Temperature Range	-40°C ~ 85°C
Polarization	Polar
Package / Case	Radial, Can - SMD
Size / Dimension	0.197" Dia (5.00mm)
Height - Seated (Max)	0.213" (5.40mm)
Surface Mount Land Size	0.209" L x 0.209" W (5.30mm x 5.30mm)
Mounting Type	Surface Mount
Ratings	AEC-Q200
RoHS Status	RoHS Compliant

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict adherence to the following parameters:

Core Electrical Parameters (Must Match):

Capacitance: 47 µF
Tolerance: ±20%
Voltage Rating: 6.3 V or higher
Polarization: Polar

Mechanical Parameters (Must Match):

Package / Case: Radial, Can - SMD
Mounting Type: Surface Mount
Size / Dimension: 0.197" Dia (5.00mm)
Surface Mount Land Size: 0.209" L x 0.209" W (5.30mm x 5.30mm)

Performance Parameters (Acceptable Variations):

Lifetime @ Temperature: Equal to or greater than 2000 Hrs @ 85°C
Operating Temperature Range: Must encompass -40°C ~ 85°C minimum
ESR: Lower values indicate improved performance
Ripple Current: Higher values indicate improved performance

Compliance Parameters (Preferred):

AEC-Q200 automotive qualification
RoHS3 Compliant status preferred over RoHS Compliant
Product Status: Active preferred over Not For New Designs

Substitute parts are categorized as MFR Recommended (direct manufacturer upgrade), Upgrade (enhanced performance characteristics), Similar (comparable but with minor parameter differences), Parametric Equivalent (identical electrical and mechanical specifications), or Direct (alternative manufacturer equivalent).

Parameter Comparison

Part Number	Manufacturer	Series	Capacitance	Voltage	Lifetime @ Temp	Operating Temp Range	Height (Max)	ESR @ 100kHz	Product Status	RoHS Status
EEE-0JA470SR	Panasonic	S	47 µF	6.3 V	2000 Hrs @ 85°C	-40°C ~ 85°C	0.213" (5.40mm)	—	Not For New Designs	RoHS Compliant
EEE-FN1E470R	Panasonic	FN	47 µF	25 V	2000 Hrs @ 105°C	-55°C ~ 105°C	0.240" (6.10mm)	700mOhm	Active	ROHS3 Compliant
EEE-FP0J470AR	Panasonic	FP	47 µF	6.3 V	2000 Hrs @ 105°C	-55°C ~ 105°C	0.228" (5.80mm)	360mOhm	Active	ROHS3 Compliant
EEE-FPC470UAR	Panasonic	FP	47 µF	16 V	2000 Hrs @ 105°C	-55°C ~ 105°C	0.228" (5.80mm)	360mOhm	Active	ROHS3 Compliant
EEE-HB0J470AR	Panasonic	HB	47 µF	6.3 V	2000 Hrs @ 105°C	-40°C ~ 105°C	0.228" (5.80mm)	—	Active	ROHS3 Compliant
EEE-HB0J470R	Panasonic	HB	47 µF	6.3 V	2000 Hrs @ 105°C	-40°C ~ 105°C	0.228" (5.80mm)	—	Active	ROHS3 Compliant
EEE-HBC470UAR	Panasonic	HB	47 µF	16 V	2000 Hrs @ 105°C	-40°C ~ 105°C	0.228" (5.80mm)	—	Active	ROHS3 Compliant
EEE-HC0J470R	Panasonic	HC	47 µF	6.3 V	3000 Hrs @ 105°C	-40°C ~ 105°C	0.228" (5.80mm)	—	Active	ROHS3 Compliant
EEE-0JA470WR	Panasonic	S	47 µF	6.3 V	1000 Hrs @ 85°C	-40°C ~ 85°C	0.217" (5.50mm)	—	Not For New Designs	RoHS Compliant
EEE-0JA470AR	Panasonic	S	47 µF	6.3 V	2000 Hrs @ 85°C	-40°C ~ 85°C	0.213" (5.40mm)	—	Not For New Designs	RoHS Compliant
EDK476M010A9DAA	KEMET	EDK	47 µF	10 V	2000 Hrs @ 85°C	-40°C ~ 85°C	0.222" (5.65mm)	—	Active	ROHS3 Compliant

Engineering Selection Recommendations

MFR Recommended Substitute: EEE-FN1E470R

This part provides higher voltage rating (25 V vs 6.3 V) with extended operating temperature range (-55°C ~ 105°C vs -40°C ~ 85°C) and improved lifetime (2000 Hrs @ 105°C vs 2000 Hrs @ 85°C). Active product status and ROHS3 compliance make it suitable for new designs. Height increases to 0.240" (6.10mm); verify PCB layout clearance before selection. ESR of 700mOhm @ 100kHz is specified.

Upgrade Substitutes: EEE-FP0J470AR, EEE-HB0J470AR, EEE-HB0J470R, EEE-HC0J470R

These parts maintain 6.3 V rating with identical 47 µF capacitance and matching land size. All feature Active product status and ROHS3 compliance. EEE-FP0J470AR offers 360mOhm ESR @ 100kHz with extended temperature range (-55°C ~ 105°C). EEE-HB series parts extend operating temperature to 105°C maximum. EEE-HC0J470R provides longest lifetime at 3000 Hrs @ 105°C. Height increases to 0.228" (5.80mm) for all upgrade options; verify PCB layout compatibility.

Upgrade Substitute with Higher Voltage: EEE-FPC470UAR, EEE-HBC470UAR

These 16 V rated parts accommodate higher voltage applications while maintaining 47 µF capacitance. Both feature Active status and ROHS3 compliance with extended temperature ranges. EEE-FPC470UAR specifies 360mOhm ESR @ 100kHz. Height increases to 0.228" (5.80mm).

Parametric Equivalent: EEE-0JA470AR

Identical electrical and mechanical specifications to EEE-0JA470SR with matching 2000 Hrs @ 85°C lifetime and -40°C ~ 85°C operating range. Maintains Not For New Designs status; use only for legacy design maintenance or replacement applications.

Similar Part: EEE-0JA470WR

Same series with reduced lifetime (1000 Hrs @ 85°C vs 2000 Hrs @ 85°C). Not For New Designs status. Smaller footprint (0.157" Dia vs 0.197" Dia) with different land size (0.169" L x 0.169" W vs 0.209" L x 0.209" W); PCB redesign required.

Direct Alternative Manufacturer: EDK476M010A9DAA (KEMET)

10 V rated aluminum electrolytic capacitor with 47 µF capacitance. Active product status and ROHS3 compliance. Maintains 2000 Hrs @ 85°C lifetime and -40°C ~ 85°C operating range. Height 0.222" (5.65mm) and land size 0.209" L x 0.209" W match primary footprint. General Purpose application rating differs from automotive AEC-Q200 qualification of Panasonic parts.

Frequently Asked Questions (FAQ)

Q: Can EEE-FN1E470R replace EEE-0JA470SR directly?

A: Electrical substitution is valid. The 25 V rating exceeds the 6.3 V requirement, and 47 µF capacitance matches exactly. However, height increases from 0.213" to 0.240", requiring PCB layout verification. Extended temperature range (-55°C ~ 105°C) and improved lifetime (2000 Hrs @ 105°C) provide performance enhancement. Active product status makes this suitable for new designs.

Q: What is the primary difference between EEE-FP0J470AR and EEE-HB0J470AR?

A: Both maintain 6.3 V rating and 47 µF capacitance with identical land size and height (0.228"). EEE-FP0J470AR specifies 360mOhm ESR @ 100kHz; EEE-HB0J470AR does not specify ESR. EEE-FP0J470AR operates -55°C ~ 105°C; EEE-HB0J470AR operates -40°C ~ 105°C. Both are Active status with ROHS3 compliance.

Q: Is EDK476M010A9DAA suitable for automotive applications?

A: EDK476M010A9DAA carries General Purpose application rating, not AEC-Q200 automotive qualification. While mechanically and electrically compatible, it lacks automotive-specific qualification. Use only in non-automotive applications or where automotive qualification is not required.

Q: Why does EEE-HC0J470R have longer lifetime than other substitutes?

A: EEE-HC0J470R specifies 3000 Hrs @ 105°C versus 2000 Hrs @ 105°C for other active Panasonic substitutes. This extended lifetime rating reflects enhanced internal design characteristics of the HC series. All other parameters remain equivalent to HB series parts.

Q: Can I use a 16 V rated part in place of 6.3 V?

A: Yes. Higher voltage ratings provide design margin and are electrically compatible in circuits designed for lower voltages. EEE-FPC470UAR and EEE-HBC470UAR both provide 16 V rating with identical 47 µF capacitance and matching land size. Verify PCB layout for height increase to 0.228" (5.80mm).

Q: What does "Not For New Designs" status mean?

A: This designation indicates the part is in mature or end-of-life phase. Panasonic recommends using Active status alternatives for new product development. EEE-0JA470SR and EEE-0JA470AR carry this status; all FP, FN, HB, and HC series substitutes are Active.

Q: Are all substitute parts RoHS compliant?

A: EEE-0JA470SR is RoHS Compliant. All recommended substitutes (FP, FN, HB, HC series and KEMET EDK) are ROHS3 Compliant, which represents enhanced RoHS compliance. Both statuses meet regulatory requirements; ROHS3 indicates compliance with additional restricted substance directives.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message