Equivalent & Substitute Parts for EEE-0JA102P

Part Overview

The Panasonic EEE-0JA102P is a 1000 µF, 6.3 V aluminum electrolytic capacitor in surface mount radial can package, rated for 2000 hours at 85°C with AEC-Q200 automotive qualification. This part carries a "Not For New Designs" status, indicating it has been superseded in Panasonic's product portfolio. Equivalent and substitute parts are necessary for ongoing production support, design upgrades, or when the original part becomes unavailable.

Key Parameters

Parameter	Value
Capacitance	1000 µF
Voltage Rating	6.3 V
Tolerance	±20%
Package Type	Radial, Can - SMD
Polarization	Polar
Mounting Type	Surface Mount
Physical Dimensions	0.394" Dia (10.00mm), Height 0.402" (10.20mm)
Land Size	0.406" L x 0.406" W (10.30mm x 10.30mm)
Ratings	AEC-Q200
RoHS Status	RoHS Compliant

Substitute Part Grouping Explanation

Substitution for the EEE-0JA102P is determined by the following criteria:

Primary Substitution Criteria:

Capacitance value: 1000 µF (exact match required)
Tolerance: ±20% (exact match required)
Package type: Radial, Can - SMD (exact match required)
Physical dimensions: 0.394" Dia (10.00mm) with compatible height
Land size: 0.406" L x 0.406" W (10.30mm x 10.30mm) (exact match required)
Mounting type: Surface Mount (exact match required)
Polarization: Polar (exact match required)

Secondary Substitution Criteria:

Voltage rating: 6.3 V or higher (higher voltage ratings are acceptable as they provide margin)
Operating temperature range: Must support automotive applications
AEC-Q200 qualification: Required for automotive use
RoHS compliance: Required for current production

Substitute parts are grouped into three categories: direct equivalents (same voltage rating), voltage upgrades (higher voltage rating with same or better thermal performance), and enhanced lifetime variants (extended operating hours at elevated temperature).

Parameter Comparison

Part Number	Manufacturer	Series	Capacitance	Voltage	Tolerance	Lifetime @ Temp.	Operating Temp.	Packaging	Product Status	RoHS Status
EEE-0JA102P	Panasonic	S	1000 µF	6.3 V	±20%	2000 Hrs @ 85°C	-40°C ~ 85°C	Tape & Reel	Not For New Designs	RoHS Compliant
EEE-FK1A102AP	Panasonic	FK	1000 µF	10 V	±20%	2000 Hrs @ 105°C	-55°C ~ 105°C	Tape & Reel	Active	ROHS3 Compliant
EEE-FK1A102GP	Panasonic	FK	1000 µF	10 V	±20%	5000 Hrs @ 105°C	-55°C ~ 105°C	Cut Tape & Digi-Reel	Active	ROHS3 Compliant
EEE-FT1C102AP	Panasonic	FT	1000 µF	16 V	±20%	2000 Hrs @ 105°C	-55°C ~ 105°C	Cut Tape & Digi-Reel	Active	ROHS3 Compliant
EEE-FN1A102P	Panasonic	FN	1000 µF	10 V	±20%	2000 Hrs @ 105°C	-55°C ~ 105°C	Tape & Reel	Active	ROHS3 Compliant
EEE-1AA102P	Panasonic	S	1000 µF	10 V	±20%	2000 Hrs @ 85°C	-40°C ~ 85°C	Tape & Reel	Not For New Designs	RoHS Compliant
EEE-FK1A102P	Panasonic	FK	1000 µF	10 V	±20%	2000 Hrs @ 105°C	-55°C ~ 105°C	Cut Tape & Digi-Reel	Active	ROHS3 Compliant
EEE-FK1C102SP	Panasonic	FKS	1000 µF	16 V	±20%	2000 Hrs @ 105°C	-55°C ~ 105°C	Tape & Reel	Not For New Designs	ROHS3 Compliant
EEE-FP1A102AP	Panasonic	FP	1000 µF	10 V	±20%	2000 Hrs @ 105°C	-55°C ~ 105°C	Tape & Reel	Active	ROHS3 Compliant
EEE-FT1C102GP	Panasonic	FT	1000 µF	16 V	±20%	5000 Hrs @ 105°C	-55°C ~ 105°C	Tape & Reel	Active	ROHS3 Compliant
EEE-HC0J102P	Panasonic	HC	1000 µF	6.3 V	±20%	5000 Hrs @ 105°C	-40°C ~ 105°C	Tape & Reel	Active	ROHS3 Compliant

Engineering Selection Recommendations

For Direct Replacement (Same Voltage Rating):

EEE-HC0J102P is the primary direct replacement for EEE-0JA102P. Both maintain the 6.3 V voltage rating and identical physical dimensions. EEE-HC0J102P offers superior performance with 5000 hours lifetime at 105°C compared to the original 2000 hours at 85°C, while maintaining Active product status and ROHS3 compliance. This part is recommended for new production and design upgrades.

For Voltage Upgrade Applications:

When circuit design permits higher voltage operation, the following active parts provide enhanced reliability:

EEE-FK1A102P and EEE-FK1A102AP (10 V rating) offer improved thermal performance with 2000 hours at 105°C and extended operating temperature range (-55°C to 105°C). EEE-FK1A102GP extends lifetime to 5000 hours at 105°C with identical voltage and capacitance ratings.

EEE-FP1A102AP (10 V rating) provides 2000 hours at 105°C with lower ESR (60 mOhm @ 100 kHz) for applications requiring reduced impedance.

EEE-FT1C102AP and EEE-FT1C102GP (16 V rating) support the highest voltage margin with 2000 and 5000 hour lifetimes respectively at 105°C.

Product Status Considerations:

Parts marked "Not For New Designs" (EEE-0JA102P, EEE-1AA102P, EEE-FK1C102SP) are suitable only for legacy production support. All active-status parts are qualified for new designs and current production.

Compliance Requirements:

All substitute parts maintain AEC-Q200 automotive qualification and RoHS compliance. ROHS3-compliant parts (FK, FT, FP, HC series) are preferred for current manufacturing.

Frequently Asked Questions (FAQ)

Q: Can EEE-HC0J102P directly replace EEE-0JA102P without circuit modification?

A: Yes. EEE-HC0J102P maintains identical capacitance (1000 µF), voltage rating (6.3 V), tolerance (±20%), physical dimensions (0.394" Dia, 10.00mm), and land size (0.406" x 0.406"). The footprint and electrical characteristics are compatible. The upgrade provides extended lifetime (5000 hours at 105°C) and active product status.

Q: What is the difference between Tape & Reel and Cut Tape & Digi-Reel packaging?

A: Both packaging formats are surface mount compatible and use identical land sizes. Tape & Reel (TR) provides continuous reel format for high-volume automated assembly. Cut Tape & Digi-Reel (CT) offers flexibility for lower volumes and mixed-component orders. Electrical performance and physical dimensions are identical between packaging variants of the same part number.

Q: Can I use a 10 V rated part in a 6.3 V circuit?

A: Yes. Higher voltage-rated capacitors are electrically compatible in lower voltage applications. A 10 V capacitor operates safely at 6.3 V with additional voltage margin. This substitution is valid when physical dimensions and land sizes match. Parts such as EEE-FK1A102P, EEE-FN1A102P, and EEE-FP1A102AP are direct mechanical substitutes with improved thermal performance.

Q: What does "Not For New Designs" status mean?

A: This designation indicates the part has been superseded by newer alternatives in Panasonic's portfolio. Such parts remain available for legacy production support but should not be selected for new circuit designs. Active-status alternatives are recommended for all new development.

Q: How do I select between EEE-FK1A102P and EEE-FK1A102GP?

A: Both parts share identical electrical ratings (1000 µF, 10 V, ±20%). The difference is lifetime: EEE-FK1A102P provides 2000 hours at 105°C, while EEE-FK1A102GP extends to 5000 hours at 105°C. Selection depends on application lifetime requirements. EEE-FK1A102GP is preferred for high-reliability automotive applications requiring extended service life.

Q: Are all substitute parts AEC-Q200 qualified?

A: Yes. All parts listed maintain AEC-Q200 automotive qualification, meeting automotive industry reliability and qualification standards. This certification is consistent across all substitute options.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message