EEE-0GA331WP Equivalent & Substitute Parts

Part Overview

The EEE-0GA331WP is a 330 µF, 4 V aluminum electrolytic capacitor in surface mount radial can package manufactured by Panasonic Electronic Components. This component is rated for automotive applications with AEC-Q200 compliance and operates across -40°C to 85°C with a rated lifetime of 1000 hours at 85°C. The part carries a "Not For New Designs" status, making identification of equivalent alternatives essential for ongoing production and design updates.

Substiute Parts

EEE-0GA331WP

Panasonic Electronic ComponentsIn Stock: 939EEE-0GA331WP Datasheet

Current PartRFQ

EDK337M004S9GAA

KEMETIn Stock: 1196EDK337M004S9GAA Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the EEE-0GA331WP is determined by strict equivalence across the following parameters:

• Capacitance value: 330 µF (exact match required)
• Voltage rating: 4 V (exact match required)
• Tolerance: ±20% (exact match required)
• Package configuration: Radial, Can - SMD (exact match required)
• Surface mount land size: 0.260" L x 0.260" W (6.60mm x 6.60mm) (exact match required)
• Polarization: Polar (exact match required)
• Automotive compliance: AEC-Q200 (required for automotive applications)
• RoHS compliance: Required for regulatory adherence

The KEMET EDK337M004S9GAA qualifies as a direct substitute based on matching all critical electrical and mechanical parameters. Enhanced performance characteristics such as extended lifetime and improved ripple current ratings represent upgrades rather than deviations from the original specification.

Parameter Comparison

Engineering Selection Recommendations

The EDK337M004S9GAA from KEMET is a qualified substitute for the EEE-0GA331WP. Both components meet identical electrical specifications and automotive compliance requirements. The KEMET part offers extended operational lifetime (2000 hours at 85°C versus 1000 hours) and maintains active product status, making it suitable for new design implementations. Physical dimensions are compatible with existing PCB layouts, with a maximum height difference of 0.005" (0.15mm) that remains within typical assembly tolerances. Both parts carry AEC-Q200 automotive qualification and RoHS compliance, satisfying regulatory requirements for automotive applications.

Frequently Asked Questions (FAQ)

Q: Can the EDK337M004S9GAA replace the EEE-0GA331WP in existing designs?

A: Yes. Both components share identical capacitance (330 µF), voltage rating (4 V), tolerance (±20%), package type (Radial, Can - SMD), and surface mount land size (0.260" L x 0.260" W). The maximum height difference of 0.005" is within standard assembly tolerances and does not affect PCB layout compatibility.

Q: What is the significance of the "Not For New Designs" status on the Panasonic part?

A: This designation indicates that Panasonic has discontinued active support for the EEE-0GA331WP and recommends transitioning to alternative components for new product development. The KEMET EDK337M004S9GAA, with active product status, is the appropriate choice for new designs.

Q: Are both parts qualified for automotive applications?

A: Yes. Both the EEE-0GA331WP and EDK337M004S9GAA carry AEC-Q200 automotive qualification and are suitable for automotive circuit applications.

Q: What is the difference in ripple current ratings between these parts?

A: At 120 Hz, both parts support 80 mA ripple current. At 10 kHz, the Panasonic part supports 136 mA while the KEMET part supports 100 mA. Circuit design must account for the lower high-frequency ripple current rating of the KEMET substitute if this parameter is critical to application performance.

Q: Do both parts meet RoHS compliance requirements?

A: Yes. The EEE-0GA331WP is RoHS Compliant, and the EDK337M004S9GAA is ROHS3 Compliant, both satisfying RoHS regulatory requirements.