EDZ710/2 Equivalent & Substitute Parts

Part Overview

The EDZ710/2 is a 2-position wire-to-board terminal block manufactured by On Shore Technology Inc., designed for horizontal PCB mounting with 0.300" (7.62mm) pitch spacing. This active product features screw-rising cage clamp termination and supports wire gauges from 12-30 AWG at 20A and 300V ratings. Alternative equivalent parts may be required due to inventory availability, supply chain considerations, or specific application requirements for enhanced current capacity or material specifications.

Substiute Parts

EDZ710/2

On Shore Technology Inc.In Stock: 902EDZ710/2 Datasheet

Current PartRFQ

282861-2

TE Connectivity AMP ConnectorsIn Stock: 5077282861-2 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The EDZ710/2 can be substituted with TE Connectivity AMP Connectors part number 282861-2 based on the following critical parameters:

• Identical 2-position configuration with 0.300" (7.62mm) pitch
• Matching horizontal-with-board mating orientation
• Identical through-hole mounting type
• Identical wire termination method (screw-rising cage clamp)
• Compatible wire gauge range (12-30 AWG)
• Matching voltage rating (300 V)
• Identical screw thread specification (M3)
• Both feature green housing color

The 282861-2 provides enhanced current capacity (24A versus 20A) and improved material specifications with tin-plated brass contacts and nickel-plated components, while maintaining full mechanical and electrical compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both the EDZ710/2 and 282861-2 are active products with full RoHS compliance and MSL Level 1 ratings, making them suitable for standard industrial and commercial applications. The EDZ710/2 maintains ROHS3 compliance with REACH unaffected status. The 282861-2 carries RoHS compliance with REACH affected designation, requiring compliance verification for applications subject to REACH regulations.

Selection between these parts should be based on:

• Current capacity requirements: The 282861-2 supports 24A versus the EDZ710/2's 20A rating
• Material specification preferences: The 282861-2 features tin-plated brass contacts and nickel-plated clamp materials for enhanced corrosion resistance
• Supply chain availability: The 282861-2 has higher inventory availability (5021 pcs versus 831 pcs)
• Regulatory compliance scope: REACH-affected applications may require the EDZ710/2

Frequently Asked Questions (FAQ)

Q: Are the EDZ710/2 and 282861-2 mechanically interchangeable?

A: Yes. Both parts share identical pitch (0.300"), mating orientation (horizontal with board), mounting type (through hole), and screw thread specification (M3), ensuring direct PCB footprint compatibility.

Q: What is the primary difference between these two parts?

A: The 282861-2 provides higher current capacity (24A versus 20A) and enhanced material specifications with tin-plated brass contacts and nickel-plated clamp materials, compared to the EDZ710/2's standard brass and copper plating.

Q: Can I use the 282861-2 in place of the EDZ710/2 in existing designs?

A: Yes, the 282861-2 is a direct substitute with superior electrical and material specifications. No design modifications are required.

Q: Are both parts suitable for high-temperature applications?

A: The EDZ710/2 specifies an operating temperature range of -30°C to 105°C. The 282861-2 does not provide an operating temperature specification in the available data.

Q: What wire gauge compatibility do these parts support?

A: Both the EDZ710/2 and 282861-2 accept wire gauges from 12-30 AWG, providing flexibility for various conductor sizes within this range.

Q: Are there any regulatory compliance differences?

A: Both parts are RoHS compliant and carry MSL Level 1 ratings. The EDZ710/2 is ROHS3 compliant with REACH unaffected status, while the 282861-2 is RoHS compliant with REACH affected status. Applications subject to REACH regulations should verify applicability.