EDZ1100/5 Terminal Block Plug - Equivalent & Substitute Parts

Part Overview

The EDZ1100/5 is a 5-position terminal block plug manufactured by On Shore Technology Inc., designed for free-hanging (in-line) applications with female sockets and 0.200" (5.08mm) pitch spacing. This component is classified as an active product with full RoHS3 compliance and REACH unaffected status. Alternative models become necessary when inventory constraints occur, when specific wire gauge requirements differ from standard specifications, or when contact material preferences necessitate substitution within the same functional category.

Substiute Parts

EDZ1100/5

On Shore Technology Inc.In Stock: 868EDZ1100/5 Datasheet

Current PartRFQ

OSTTS05515A

On Shore Technology Inc.In Stock: 2017OSTTS05515A Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the EDZ1100/5 is determined by the following critical parameters that must remain consistent:

• Connector Type & Configuration: Must be a 5-position terminal block plug with female sockets
• Pitch Spacing: Must maintain 0.200" (5.08mm) pitch for mechanical compatibility
• Mounting Style: Must be free-hanging (in-line) orientation
• Termination Method: Must use screw termination
• Voltage Rating: Must support minimum 300 V UL rating
• Operating Temperature Range: Must cover -30°C ~ 105°C
• Flammability Rating: Must meet UL94 V-0 standard
• Compliance: Must maintain RoHS3 compliance and REACH unaffected status

The OSTTS05515A qualifies as a direct substitute because it satisfies all critical parameters. Variations in wire gauge range (12-24 AWG vs. 10-22 AWG), contact material composition (Brass vs. Copper Tin Alloy), housing material (Brass vs. Polyamide), and torque specifications (0.4 Nm vs. 0.5 Nm) are within acceptable engineering tolerances for this product category and do not compromise functional equivalence.

Parameter Comparison

Engineering Selection Recommendations

Both the EDZ1100/5 and OSTTS05515A maintain active product status with full RoHS3 compliance and REACH unaffected certification, ensuring regulatory alignment for current and future applications. Selection between these parts should be based on specific application requirements:

The EDZ1100/5 is the primary choice when wire gauge requirements specifically demand 10-22 AWG compatibility or when Copper Tin Alloy contact material is specified for corrosion resistance in particular environments.

The OSTTS05515A serves as a functional equivalent when wire gauge flexibility (12-24 AWG) accommodates the application, offering broader wire size compatibility. Both parts maintain identical pitch spacing, voltage rating, operating temperature range, and flammability certification, ensuring mechanical and electrical interchangeability within the specified parameter envelope.

Frequently Asked Questions (FAQ)

Q: Can OSTTS05515A replace EDZ1100/5 in all applications?

A: OSTTS05515A qualifies as a direct substitute when the application wire gauge falls within the 12-24 AWG range. If the application requires 10 AWG wire accommodation, EDZ1100/5 remains the appropriate selection.

Q: What is the impact of different contact materials (Copper Tin Alloy vs. Brass)?

A: Both materials are suitable for 300 V screw-terminated applications. Contact material selection depends on environmental exposure and corrosion resistance requirements specific to the end application.

Q: Are the housing material differences significant?

A: EDZ1100/5 uses Polyamide (PA) nylon housing, while OSTTS05515A uses Brass housing. Both materials meet UL94 V-0 flammability requirements and maintain the same operating temperature range. Housing material selection should align with mechanical mounting and environmental exposure specifications.

Q: Does the torque specification difference (0.5 Nm vs. 0.4 Nm) affect compatibility?

A: Both torque values fall within acceptable ranges for screw-terminated terminal blocks. The 0.1 Nm difference does not compromise functional performance or mechanical integrity in standard applications.

Q: Are both parts suitable for new designs?

A: Yes. Both EDZ1100/5 and OSTTS05515A carry active product status with current RoHS3 compliance and REACH unaffected certification, making them appropriate for new design implementations.

Q: What is the wire strip length consideration?

A: EDZ1100/5 specifies 7mm strip length, while OSTTS05515A allows 6-7mm flexibility. This minor variation does not affect electrical performance or mechanical mating in standard applications.