EDSTLZ975/3-SW Equivalent & Substitute Parts

Part Overview

The EDSTLZ975/3-SW is a 6-position terminal block header manufactured by On Shore Technology Inc., featuring male pins with 2-side shrouding, 90° right-angle orientation, and 0.200" (5.08mm) pitch spacing. This component is designed for solder mounting applications with a rated voltage of 300V UL and operating temperature range of -30°C to 105°C.

The EDSTLZ975/3-SW carries an Obsolete product status. Identifying equivalent substitute parts is necessary to maintain design continuity and ensure component availability for production, repair, and maintenance applications.

Substiute Parts

EDSTLZ975/3-SW

On Shore Technology Inc.In Stock: 1085EDSTLZ975/3-SW Datasheet

Current PartRFQ

EDSTLZ970/3

On Shore Technology Inc.In Stock: 787EDSTLZ970/3 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the EDSTLZ975/3-SW is determined by strict equivalence across the following critical parameters:

• Number of positions: 6
• Positions per level: 3
• Number of levels: 2
• Pitch spacing: 0.200" (5.08mm)
• Header orientation: 90°, Right Angle
• Type configuration: Header, Male Pins, Shrouded (2 Side)
• Mounting method: Solder
• Voltage rating: 300V UL
• Operating temperature range: -30°C to 105°C
• Housing material: Polyamide (PA), Nylon
• Contact tail length: 0.138" (3.50mm)
• Insulation height: 0.138" (3.50mm)
• Flammability rating: UL94 V-0

The EDSTLZ970/3 meets all these criteria and is classified as an MFR-recommended substitute. The primary distinction is product status: EDSTLZ970/3 is Active, whereas EDSTLZ975/3-SW is Obsolete.

Parameter Comparison

Engineering Selection Recommendations

The EDSTLZ970/3 is the direct substitute for the EDSTLZ975/3-SW. Both components share identical electrical and mechanical specifications, including voltage rating, temperature range, pitch spacing, position configuration, and mounting method. Both maintain ROHS3 compliance and UL94 V-0 flammability certification.

The primary advantage of selecting EDSTLZ970/3 is its Active product status, ensuring long-term availability and continued manufacturing support. The EDSTLZ975/3-SW, classified as Obsolete, presents supply chain risk and should be replaced in new designs and production runs.

For applications currently using EDSTLZ975/3-SW, direct substitution with EDSTLZ970/3 requires no circuit redesign, PCB layout modification, or functional re-qualification, as all critical parameters remain equivalent.

Frequently Asked Questions (FAQ)

Q: Can EDSTLZ970/3 be used as a direct replacement for EDSTLZ975/3-SW?

A: Yes. Both components are electrically and mechanically equivalent across all specified parameters, including position count, pitch spacing, voltage rating, temperature range, and mounting method. No design changes are required.

Q: What is the primary difference between these two parts?

A: The EDSTLZ975/3-SW is Obsolete, while EDSTLZ970/3 is Active. This distinction affects component availability and manufacturer support, not functional performance.

Q: Are there packaging differences between EDSTLZ975/3-SW and EDSTLZ970/3?

A: The EDSTLZ970/3 is supplied in Bulk packaging. Packaging format does not affect component functionality or electrical characteristics.

Q: Do both parts meet the same compliance standards?

A: Yes. Both EDSTLZ975/3-SW and EDSTLZ970/3 are ROHS3 compliant, REACH unaffected, and carry UL94 V-0 flammability certification.

Q: What inventory status should be considered when selecting between these parts?

A: EDSTLZ975/3-SW has 985 pieces in stock, while EDSTLZ970/3 has 742 pieces available. However, the Active status of EDSTLZ970/3 ensures continued replenishment, whereas EDSTLZ975/3-SW, being Obsolete, may face future supply constraints.