EDSTL130/5 Terminal Block Header - Equivalent & Substitute Parts

Part Overview

The EDSTL130/5 is a 5-position terminal block header manufactured by On Shore Technology Inc., designed for vertical through-hole mounting with 5.00mm pitch spacing. This component is classified as a male pin, unshrouded header suitable for solder termination applications. The part maintains Active product status with 994 units in current inventory.

Terminal block headers of this specification are essential in applications requiring reliable electrical connections with standardized pitch spacing and voltage ratings. Equivalent and substitute parts become necessary when addressing supply chain constraints, lead time requirements, or specific application compatibility needs while maintaining electrical and mechanical performance standards.

Substiute Parts

EDSTL130/5

On Shore Technology Inc.In Stock: 1058EDSTL130/5 Datasheet

Current PartRFQ

1546931-5

TE Connectivity AMP ConnectorsIn Stock: 14571546931-5 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the EDSTL130/5 is determined by strict alignment of the following critical parameters:

• Position Count: Must equal 5 positions
• Pitch Spacing: Must equal 0.197" (5.00mm)
• Header Type: Must be male pins, unshrouded configuration
• Orientation: Must be vertical mounting
• Termination: Must be solder-compatible
• Mounting: Must be through-hole
• Voltage Rating: Must meet or exceed 300 V UL specification
• Current Rating: Must meet or exceed 10 A UL specification
• Flammability: Must maintain UL94 V-0 rating
• Compliance: Must maintain ROHS3 compliance

The substitute part 1546931-5 (TE Connectivity AMP Connectors, Buchanan series) satisfies all critical substitution criteria, with electrical ratings that exceed the original specification.

Parameter Comparison

Engineering Selection Recommendations

Both the EDSTL130/5 and 1546931-5 maintain Active product status and satisfy all mandatory compliance requirements including ROHS3 compliance, UL94 V-0 flammability rating, and EAR99 export classification. The substitute part 1546931-5 provides a current rating of 12 A, which exceeds the original specification of 10 A, offering additional design margin for applications operating at or near maximum current limits.

Selection between these parts should be based on availability, lead time requirements, and supply chain considerations. Both parts are electrically and mechanically interchangeable within the specified parameter envelope.

Frequently Asked Questions (FAQ)

Q: Can 1546931-5 be used as a direct replacement for EDSTL130/5?

A: Yes. Both parts share identical pitch spacing (5.00mm), position count (5), orientation (vertical), termination method (solder), and mounting type (through-hole). Electrical ratings and compliance certifications are equivalent or superior.

Q: What is the significance of the higher current rating on 1546931-5?

A: The 1546931-5 is rated for 12 A versus 10 A on the EDSTL130/5. This higher rating provides additional operational margin and does not create compatibility issues in applications designed for the original 10 A specification.

Q: Are there any mechanical differences between these parts?

A: Contact tail length (0.138" / 4.60mm) and insulation height (0.079" / 2.00mm) are identical. Both parts are black and designed for through-hole PCB mounting with solder termination.

Q: Do both parts meet the same compliance standards?

A: Yes. Both parts are ROHS3 compliant, carry UL94 V-0 flammability ratings, and share identical ECCN (EAR99) and HTSUS (8536.69.4040) classifications.

Q: What packaging format is available for these parts?

A: Both parts are supplied in Bulk packaging format.