ED G SC 1 Equivalent & Substitute Parts

Part Overview

The ED G SC 1 is a tactile switch manufactured by C&K, classified as SPST-NO (Single Pole Single Throw - Normally Open) with a contact rating of 0.05A at 100VAC/DC. This surface mount component features a snap dome actuator with top actuation, IP67 ingress protection, and sealed construction suitable for applications requiring dust and water resistance.

The ED G SC 1 carries an Obsolete product status. Locating equivalent substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production or repair requirements for systems utilizing this component.

Substiute Parts

ED G SC 1

C&KIn Stock: 924ED G SC 1 Datasheet

Current PartRFQ

EDGSC1LFG

C&KIn Stock: 2030EDGSC1LFG Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ED G SC 1 are identified based on electrical and mechanical parameter equivalence within the ED series. The substitution criteria are:

• Circuit configuration: SPST-NO
• Contact rating: 0.05A @ 100VAC/DC
• Actuator type: Snap Dome
• Mounting type: Surface Mount
• Actuator height: 1.20mm
• Actuator orientation: Top Actuated
• Termination style: SMD (SMT) Tab
• Operating force: 240gf
• Ingress protection: IP67
• Operating temperature range: -55°C ~ 85°C
• Switch travel: 0.30mm
• Mechanical life: 1,000,000 Cycles

Parts meeting all these parameters are classified as direct equivalents and may be substituted without design modification.

Parameter Comparison

Engineering Selection Recommendations

The EDGSC1LFG is a direct electrical and mechanical equivalent to the ED G SC 1. All functional parameters, including circuit configuration, contact rating, actuator specifications, and environmental ratings, are identical.

The primary distinction between these parts is product status and compliance certification. The ED G SC 1 is classified as Obsolete and carries RoHS non-compliant status. The EDGSC1LFG maintains Active product status and is ROHS3 Compliant, making it the preferred selection for new designs and applications subject to RoHS regulatory requirements.

Both parts are manufactured by C&K within the ED series and share the same base product number (EDGSC). The EDGSC1LFG is supplied in Tray packaging, whereas packaging information for the ED G SC 1 is not specified.

Frequently Asked Questions (FAQ)

Q: Can EDGSC1LFG be used as a direct replacement for ED G SC 1?

A: Yes. The EDGSC1LFG meets all electrical and mechanical specifications of the ED G SC 1, including circuit configuration, contact rating, actuator type, mounting type, actuator height, operating force, ingress protection rating, operating temperature range, switch travel, and mechanical life. No design modification is required.

Q: What is the difference between ED G SC 1 and EDGSC1LFG?

A: The parts are electrically and mechanically identical. The ED G SC 1 is Obsolete and RoHS non-compliant. The EDGSC1LFG is Active and ROHS3 Compliant. The EDGSC1LFG is supplied in Tray packaging.

Q: Why should I select EDGSC1LFG over ED G SC 1?

A: The EDGSC1LFG offers improved supply chain availability due to its Active product status. It also satisfies RoHS3 compliance requirements, making it suitable for applications and markets with regulatory mandates. Both parts deliver identical functional performance.

Q: Are there packaging differences between these parts?

A: The EDGSC1LFG is supplied in Tray packaging. Packaging information for the ED G SC 1 is not specified in available documentation.

Q: What are the key parameters that define substitution compatibility for this switch?

A: Substitution compatibility is determined by SPST-NO circuit configuration, 0.05A @ 100VAC/DC contact rating, snap dome actuator type, surface mount mounting, 1.20mm actuator height, top actuation orientation, SMD tab termination, 240gf operating force, IP67 ingress protection, -55°C to 85°C operating temperature range, 0.30mm switch travel, and 1,000,000 cycle mechanical life.