ED606CS_S2_00001 Equivalent & Substitute Parts

Part Overview

The ED606CS_S2_00001 is a general-purpose diode array manufactured by Panjit International Inc., configured as a 1 Pair Common Cathode arrangement rated for 600V DC reverse voltage and 6A average rectified current per diode. The device is housed in a TO-252-3 surface mount package (DPAK with 2 Leads + Tab, SC-63 designation) and features fast recovery characteristics with a reverse recovery time of 35 nanoseconds.

This part is classified as obsolete. Locating equivalent substitute parts is necessary to support ongoing production requirements, field repairs, and design continuity for applications currently utilizing this diode array configuration.

Substiute Parts

ED606CS_S2_00001

Panjit International Inc.In Stock: 4005ED606CS_S2_00001 Datasheet

Current PartRFQ

ED606CS_L2_00001

Panjit International Inc.In Stock: 4115ED606CS_L2_00001 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ED606CS_S2_00001 is determined by strict equivalence across all critical electrical and mechanical parameters. The following parameters establish the substitution criteria:

Electrical Parameters (Must Match Exactly):

• Diode Configuration: 1 Pair Common Cathode
• Voltage - DC Reverse (Vr) (Max): 600 V
• Current - Average Rectified (Io) (per Diode): 6 A
• Voltage - Forward (Vf) (Max) @ If: 1.7 V @ 3 A
• Reverse Recovery Time (trr): 35 ns
• Current - Reverse Leakage @ Vr: 1 µA @ 600 V
• Operating Temperature - Junction: -55°C to 150°C
• Speed Classification: Fast Recovery ≤ 500ns, > 200mA (Io)

Mechanical Parameters (Must Match Exactly):

• Mounting Type: Surface Mount
• Package / Case: TO-252-3, DPAK (2 Leads + Tab), SC-63
• Supplier Device Package: TO-252

Compliance Parameters (Must Match Exactly):

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)
• REACH Status: REACH Unaffected

Parts meeting all these criteria are classified as parametric equivalents and direct substitutes.

Parameter Comparison

Engineering Selection Recommendations

The ED606CS_L2_00001 is a direct parametric equivalent to the ED606CS_S2_00001. Both parts are manufactured by Panjit International Inc. and share identical electrical specifications, mechanical packaging, and compliance certifications.

Selection Basis:

Both parts are classified as obsolete products. The ED606CS_L2_00001 maintains full compatibility with applications designed for the ED606CS_S2_00001 across all specified parameters. The parts are interchangeable at the component level without circuit modification or performance degradation.

Both parts carry ROHS3 compliance and REACH unaffected status, meeting current regulatory requirements for electronic component procurement. Moisture sensitivity level MSL-1 (Unlimited) indicates no special storage or handling requirements beyond standard component practices.

Current inventory availability differs between the two variants: ED606CS_S2_00001 has 3,895 pieces in stock, while ED606CS_L2_00001 has 4,068 pieces in stock. Selection between these equivalents may be determined by inventory availability and procurement lead time requirements.

Frequently Asked Questions (FAQ)

Q: Can ED606CS_L2_00001 be used as a direct replacement for ED606CS_S2_00001?

A: Yes. The ED606CS_L2_00001 is a parametric equivalent with identical electrical ratings, mechanical packaging, and compliance certifications. No circuit modifications are required for substitution.

Q: Are there any differences in the TO-252-3 package between these parts?

A: No. Both parts use the identical TO-252-3 DPAK package with 2 Leads + Tab (SC-63 designation). Pin configuration, lead spacing, and thermal characteristics are identical.

Q: What is the significance of the suffix designations _S2 and _L2?

A: The suffix designations indicate different manufacturing batches or tape reel configurations from Panjit International Inc. The electrical and mechanical specifications remain identical across these variants.

Q: Are both parts suitable for high-temperature applications?

A: Yes. Both parts are rated for junction operating temperatures from -55°C to 150°C, supporting applications across this full temperature range.

Q: Do these parts require special handling or storage conditions?

A: No. Both parts carry Moisture Sensitivity Level MSL-1 (Unlimited), indicating no special moisture control or baking requirements beyond standard component storage practices.

Q: Are both parts compliant with current environmental regulations?

A: Yes. Both parts are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements for electronic component procurement in regulated markets.

Q: What is the reverse recovery time specification, and why is it important?

A: Both parts specify a reverse recovery time (trr) of 35 nanoseconds, classifying them as fast recovery diodes. This parameter determines switching speed in rectification and switching applications.

Q: Can these parts be used in surface mount assembly processes?

A: Yes. Both parts are surface mount devices in TO-252-3 DPAK packaging, compatible with standard SMT assembly equipment and reflow soldering processes.