ED365/3 Equivalent & Substitute Parts

Part Overview

The ED365/3 is a 3-position wire-to-board terminal block manufactured by On Shore Technology Inc., designed for horizontal board mounting with 7.5mm pitch spacing. This component is classified as Active product status and is RoHS3 compliant. Substitute parts are identified when equivalent electrical performance, mechanical compatibility, and regulatory compliance can be maintained across different manufacturer part numbers within the same product category.

Substiute Parts

ED365/3

On Shore Technology Inc.In Stock: 785ED365/3 Datasheet

Current PartRFQ

OSTVI034152

On Shore Technology Inc.In Stock: 1072OSTVI034152 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ED365/3 is determined by the following critical parameters:

• Electrical Compatibility: Current rating (16 A minimum), voltage rating (300 V minimum), and wire gauge acceptance range
• Mechanical Compatibility: Pitch spacing (7.50mm), mating orientation (horizontal with board), mounting type (through hole), and screw thread specification (M3)
• Termination Method: Screw-based rising cage clamp wire termination
• Regulatory Compliance: RoHS3 compliance and REACH unaffected status
• Environmental Performance: Operating temperature range (-30°C ~ 105°C)

The OSTVI034152 qualifies as a direct substitute based on matching these core parameters across all electrical, mechanical, and regulatory criteria.

Parameter Comparison

Engineering Selection Recommendations

Both ED365/3 and OSTVI034152 maintain Active product status with full RoHS3 compliance and REACH unaffected regulatory standing. Selection between these parts should be based on application-specific wire gauge requirements and inventory availability. The OSTVI034152 accommodates a broader wire gauge range (12-28 AWG versus 12-22 AWG), providing additional flexibility for applications utilizing smaller gauge conductors. Both parts are suitable for direct substitution in applications requiring 16 A current capacity at 300 V with through-hole mounting and M3 screw termination.

Frequently Asked Questions (FAQ)

Q: Can OSTVI034152 be used as a direct replacement for ED365/3?

A: Yes. Both parts share identical electrical ratings (16 A, 300 V), mechanical specifications (7.5mm pitch, M3 screw thread, horizontal board mounting), and regulatory compliance (RoHS3, REACH unaffected). The OSTVI034152 accepts a wider wire gauge range, making it compatible with all applications supported by ED365/3.

Q: What is the primary difference between ED365/3 and OSTVI034152?

A: The OSTVI034152 accepts wire gauges from 12-28 AWG, compared to the ED365/3 specification of 12-22 AWG. Both parts are otherwise electrically and mechanically equivalent.

Q: Are there any torque specification differences?

A: Yes. ED365/3 specifies 0.5 Nm (4.4 Lb-In) screw torque, while OSTVI034152 specifies 0.4 Nm (3.5 Lb-In). Both use M3 screw threads and are compatible with standard assembly procedures.

Q: Do both parts meet the same regulatory requirements?

A: Yes. Both ED365/3 and OSTVI034152 are RoHS3 compliant, REACH unaffected, and classified under ECCN EAR99 with identical HTSUS coding (8536.90.4000).

Q: What packaging format is available for these parts?

A: Both parts are supplied in Bulk packaging. Current inventory availability: ED365/3 (761 Pcs), OSTVI034152 (970 Pcs).