ED3001/5-KD Terminal Block Equivalent & Substitute Parts

Part Overview

The ED3001/5-KD is a 5-position wire-to-board terminal block manufactured by On Shore Technology Inc., designed for through-hole PCB mounting with a 45° angled mating orientation. This component operates at 300V with a 16A current rating and accommodates wire gauges from 14-28 AWG using screwless push-in spring termination. The part is actively produced and stocked, with ROHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are identified when equivalent electrical performance, mechanical compatibility, and regulatory compliance can be maintained across the specified parameter range.

Substiute Parts

ED3001/5-KD

On Shore Technology Inc.In Stock: 1124ED3001/5-KD Datasheet

Current PartRFQ

OSTHT050080

On Shore Technology Inc.In Stock: 1540OSTHT050080 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ED3001/5-KD is determined by the following critical parameters:

• Electrical Compatibility: Voltage rating must be ≥300V; current rating must be ≥16A
• Mechanical Compatibility: 5 positions per level; 0.197" (5.00mm) pitch; through-hole mounting; screwless push-in spring termination
• Environmental Compliance: ROHS3 compliance; operating temperature range of -30°C to 105°C or broader
• Wire Accommodation: Wire gauge range must accommodate 14-28 AWG minimum

The substitute part OSTHT050080 meets these criteria with equivalent electrical ratings, identical pitch and position count, compatible termination method, and matching regulatory compliance. Variations in contact material plating and housing material composition do not affect functional substitutability within the specified parameter envelope.

Parameter Comparison

Engineering Selection Recommendations

Both the ED3001/5-KD and OSTHT050080 are active production components from On Shore Technology Inc. with identical ROHS3 and REACH compliance certifications. The ED3001/5-KD maintains a 16A current rating, while the OSTHT050080 operates at 15A. For applications requiring the full 16A capacity, the ED3001/5-KD is the appropriate selection. The OSTHT050080 is suitable for applications operating at or below 15A. Both parts share identical voltage ratings (300V), pitch specifications (5.00mm), wire termination methods, and operating temperature ranges, ensuring mechanical and electrical interchangeability within their respective current limitations. Selection should be based on circuit current requirements and part availability.

Frequently Asked Questions (FAQ)

Q: Can OSTHT050080 replace ED3001/5-KD in all applications?

A: OSTHT050080 is suitable for applications where circuit current does not exceed 15A. The ED3001/5-KD supports 16A operation. If your application requires 16A capacity, ED3001/5-KD is required. Both parts are electrically and mechanically compatible at 15A and below.

Q: Are the pitch and position specifications identical between these parts?

A: Yes. Both parts feature 5 positions per level with 0.197" (5.00mm) pitch spacing. PCB layout compatibility is maintained between the two parts.

Q: What wire gauge ranges do these terminal blocks accommodate?

A: ED3001/5-KD accommodates 14-28 AWG. OSTHT050080 accommodates 12-28 AWG. Both parts support the full 14-28 AWG range, with OSTHT050080 offering additional capacity for 12 AWG wire.

Q: Are both parts RoHS and REACH compliant?

A: Yes. Both ED3001/5-KD and OSTHT050080 are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements for electronic component manufacturing and distribution.

Q: What is the operating temperature range for these components?

A: Both parts operate across -30°C to 105°C, providing equivalent thermal performance for industrial and commercial applications.

Q: Do these parts use the same termination method?

A: Yes. Both employ screwless push-in spring termination with lever actuation, ensuring identical installation procedures and tooling requirements.