ECX-P27BN-200.000 Equivalent & Substitute Parts

Part Overview

The ECX-P27BN-200.000 is a 200 MHz XO (Standard) LVPECL oscillator manufactured by ECS Inc. as part of the ECX-P ECSpressCON™ series. This surface mount crystal oscillator operates at 2.5V with enable/disable functionality, designed for applications requiring stable 200 MHz clock signals with LVPECL output levels. The part is currently active in production with 1026 units in stock. Substitute parts are identified when equivalent electrical and mechanical specifications are required due to supply constraints, design flexibility, or inventory availability.

Substiute Parts

ECX-P27BN-200.000

ECS Inc.In Stock: 1079ECX-P27BN-200.000 Datasheet

Current PartRFQ

531EA200M000DG

Skyworks Solutions Inc.In Stock: 1524531EA200M000DG Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The 531EA200M000DG from Skyworks Solutions Inc. qualifies as a direct substitute based on the following critical parameters:

• Frequency Match: Both parts operate at 200 MHz
• Output Compatibility: Both provide LVPECL output
• Supply Voltage: Both require 2.5V operation
• Enable/Disable Function: Both include enable/disable capability
• Frequency Stability: Both maintain ±50ppm stability
• Temperature Range: Both operate across -40°C ~ 85°C
• Package Equivalence: Both use 6-SMD, No Lead surface mount packaging with identical footprint dimensions (7.00mm x 5.00mm)
• Regulatory Compliance: Both are ROHS3 compliant with MSL 1 rating

Parameter Comparison

Engineering Selection Recommendations

Both parts maintain active product status and full regulatory compliance under ROHS3 and REACH standards. Selection between ECX-P27BN-200.000 and 531EA200M000DG should be based on:

• Supply availability: The 531EA200M000DG currently has 1424 units in stock versus 1026 units for the ECX-P27BN-200.000
• Power budget considerations: The ECX-P27BN-200.000 draws a maximum of 50mA, while the 531EA200M000DG draws 121mA maximum
• PCB height constraints: The ECX-P27BN-200.000 has a maximum seated height of 1.70mm compared to 1.80mm for the 531EA200M000DG
• Disable mode current: The 531EA200M000DG specifies 75mA maximum disable current, whereas the ECX-P27BN-200.000 does not specify this parameter

Both parts are electrically and mechanically interchangeable for standard 200 MHz LVPECL clock applications within the specified operating conditions.

Frequently Asked Questions (FAQ)

Q: Can the 531EA200M000DG replace the ECX-P27BN-200.000 in existing designs?

A: Yes, the 531EA200M000DG is a direct substitute. Both parts share identical frequency, output type, supply voltage, enable/disable function, frequency stability, operating temperature range, and package footprint. PCB layout and schematic connections require no modification.

Q: What are the differences between these two parts?

A: The primary differences are maximum supply current (50mA vs. 121mA), maximum seated height (1.70mm vs. 1.80mm), and disable mode current specification (not specified vs. 75mA). These differences may impact power consumption budgets and PCB height clearance in space-constrained applications.

Q: Are both parts suitable for high-reliability applications?

A: Both parts are ROHS3 compliant and carry MSL 1 (Unlimited) moisture sensitivity ratings, indicating suitability for standard industrial and commercial applications. Specific reliability requirements should be evaluated against application-level specifications.

Q: Do these oscillators require any special handling or storage conditions?

A: Both parts carry MSL 1 rating, which means they have unlimited floor life and do not require special moisture control during storage or handling prior to soldering.

Q: Can these parts be used interchangeably on the same PCB assembly line?

A: Yes. Both parts use identical 6-SMD, No Lead packaging with 7.00mm x 5.00mm footprints. Standard surface mount assembly processes apply without modification. The 0.10mm height difference (1.70mm vs. 1.80mm) is within typical PCB assembly tolerances.