ECW-H10222JV Film Capacitor Equivalent & Substitute Parts

Part Overview

The ECW-H10222JV is a 2200 pF film capacitor rated for 1000V DC with polypropylene dielectric material in a radial through-hole package. This component is designed for high-frequency and switching applications requiring stable capacitance and reliable performance across the operating temperature range of -40°C to 105°C. The part maintains Active product status and is ROHS3 compliant.

Substitute parts are identified when equivalent capacitance and tolerance values are maintained while voltage ratings are increased, allowing for higher voltage circuit applications without changing the physical footprint or electrical characteristics critical to circuit function.

Substiute Parts

ECW-H10222JV

Panasonic Electronic ComponentsIn Stock: 899ECW-H10222JV Datasheet

Current PartRFQ

ECW-H12222JV

Panasonic Electronic ComponentsIn Stock: 1284ECW-H12222JV Datasheet

DirectRFQ

ECW-H16222JV

Panasonic Electronic ComponentsIn Stock: 3720ECW-H16222JV Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ECW-H10222JV are qualified based on the following criteria:

• Capacitance value: 2200 pF (exact match required)
• Tolerance: ±5% (exact match required)
• Dielectric material: Polypropylene (PP), Metallized (exact match required)
• Operating temperature range: -40°C to 105°C (exact match required)
• Mounting type: Through Hole (exact match required)
• Package / Case: Radial (exact match required)
• Physical dimensions: 0.709" L x 0.256" W with 0.591" lead spacing (exact match required)
• Termination: PC Pins (exact match required)

Voltage rating may be increased above the original 1000V DC specification while maintaining all other parameters. Higher voltage ratings provide additional design margin for circuits operating at or near the original voltage specification.

Parameter Comparison

Engineering Selection Recommendations

All three parts—ECW-H10222JV, ECW-H12222JV, and ECW-H16222JV—maintain Active product status and are ROHS3 compliant with REACH Unaffected designation. Selection between these parts depends on circuit voltage requirements:

• ECW-H10222JV: Use when circuit voltage does not exceed 1000V DC
• ECW-H12222JV: Use when circuit voltage does not exceed 1250V DC
• ECW-H16222JV: Use when circuit voltage does not exceed 1600V DC

All parts share identical capacitance, tolerance, dielectric material, operating temperature range, physical dimensions, and lead spacing. Direct substitution is electrically and mechanically compatible within the specified voltage limits of each part.

Frequently Asked Questions (FAQ)

Q: Can ECW-H12222JV or ECW-H16222JV be used in place of ECW-H10222JV?

A: Yes. Both substitute parts maintain the same 2200 pF capacitance, ±5% tolerance, polypropylene dielectric, operating temperature range, and physical dimensions. The higher voltage ratings (1250V and 1600V respectively) provide additional voltage margin and are electrically compatible with circuits designed for 1000V operation.

Q: Are the physical dimensions identical across all three parts?

A: Yes. All three parts share identical dimensions of 0.709" L x 0.256" W (18.00mm x 6.50mm) with 0.591" (15.00mm) lead spacing and maximum seated height of 0.591" (15.00mm). Direct board-level substitution is possible without layout modifications.

Q: What is the difference between these parts?

A: The primary difference is the DC voltage rating. ECW-H10222JV is rated for 1000V DC, ECW-H12222JV for 1250V DC, and ECW-H16222JV for 1600V DC. All other electrical and mechanical parameters remain constant.

Q: Are all parts ROHS3 compliant?

A: Yes. All three parts are ROHS3 compliant and REACH Unaffected, meeting current environmental and regulatory requirements.

Q: Can a lower voltage-rated part substitute for a higher voltage requirement?

A: No. Substitution is only valid when the substitute part voltage rating meets or exceeds the circuit requirement. Using a lower voltage-rated part in a higher voltage application creates reliability and safety risks.