ECW-H10102JV Film Capacitor Equivalent & Substitute Parts

Part Overview

The ECW-H10102JV is a 1000 pF film capacitor rated for 1000V DC with polypropylene dielectric material in a radial through-hole package. This component is manufactured by Panasonic Electronic Components and maintains Active product status with full RoHS3 compliance. Substitute parts are identified within the ECW-H series to accommodate applications requiring higher voltage ratings or alternative specifications while maintaining core electrical and mechanical compatibility.

Substiute Parts

ECW-H10102JV

Panasonic Electronic ComponentsIn Stock: 976ECW-H10102JV Datasheet

Current PartRFQ

ECW-H12102JV

Panasonic Electronic ComponentsIn Stock: 1130ECW-H12102JV Datasheet

DirectRFQ

ECW-H16102JV

Panasonic Electronic ComponentsIn Stock: 1446ECW-H16102JV Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts within the ECW-H series maintain identical capacitance (1000 pF), tolerance (±5%), dielectric material (polypropylene metallized), operating temperature range (-40°C ~ 105°C), mounting type (through hole radial), physical dimensions (18.00mm x 6.50mm), lead spacing (15.00mm), and termination (PC pins). The primary differentiator among substitute parts is the DC voltage rating. Substitution is valid when the substitute part's voltage rating meets or exceeds the application requirement of the original part. All substitute parts retain Active product status and ROHS3 compliance.

Parameter Comparison

Engineering Selection Recommendations

All three parts maintain Active product status and ROHS3 compliance. ECW-H12102JV and ECW-H16102JV are direct substitutes for ECW-H10102JV in applications where the circuit design permits higher voltage ratings. Selection between substitute parts depends on the specific voltage requirement of the application. ECW-H12102JV provides a 250V margin above the original specification, while ECW-H16102JV provides a 600V margin. Physical footprint and lead spacing remain identical across all three parts, ensuring PCB compatibility without layout modification.

Frequently Asked Questions (FAQ)

Q: Can ECW-H12102JV or ECW-H16102JV replace ECW-H10102JV in my circuit?

A: Yes, provided your circuit design permits operation at the higher voltage rating. Both substitute parts maintain identical capacitance, tolerance, dielectric material, operating temperature range, physical dimensions, and lead spacing. The higher voltage rating of the substitute parts does not degrade performance in applications designed for lower voltages.

Q: What is the primary difference between these three parts?

A: The DC voltage rating is the primary differentiator. ECW-H10102JV is rated for 1000V DC, ECW-H12102JV for 1250V DC, and ECW-H16102JV for 1600V DC. All other electrical and mechanical parameters remain identical.

Q: Are the physical dimensions identical across all three parts?

A: Yes. All three parts share identical dimensions (18.00mm x 6.50mm), lead spacing (15.00mm), and radial through-hole package configuration. No PCB layout modification is required when substituting between these parts.

Q: Do all three parts meet the same compliance standards?

A: Yes. ECW-H10102JV, ECW-H12102JV, and ECW-H16102JV are all ROHS3 compliant and maintain Active product status from Panasonic Electronic Components.

Q: Which substitute part should I select if my application voltage requirement is uncertain?

A: Select based on the maximum voltage your circuit may encounter. ECW-H16102JV provides the highest voltage margin and is suitable for applications with voltage transients or design uncertainty within the 1600V DC limit.