ECS-P83-AN Equivalent & Substitute Parts

Part Overview

The ECS-P83-AN is an XO (Standard) programmable crystal oscillator manufactured by ECS Inc. This component operates across a frequency range of 1 MHz to 125 MHz with HCMOS output and 3.3V supply voltage. The oscillator features Enable/Disable functionality and is housed in an 8-DIP, 4-lead half-size metal can package suitable for through-hole mounting applications.

The ECS-P83-AN is classified as an active product with current inventory availability. Identifying equivalent and substitute parts is necessary to support design flexibility, ensure supply chain continuity, and accommodate varying compliance requirements across different manufacturing and deployment environments.

Substiute Parts

ECS-P83-AN

ECS Inc.In Stock: 691ECS-P83-AN Datasheet

Current PartRFQ

ECS-P83-ANX

ECS Inc.In Stock: 839ECS-P83-ANX Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ECS-P83-AN is determined by strict equivalence across the following critical parameters:

Electrical Compatibility Parameters:

• Frequency range capability (1 MHz ~ 125 MHz)
• Output logic family (HCMOS)
• Supply voltage (3.3V)
• Enable/Disable function availability
• Frequency stability tolerance (±100ppm)
• Operating temperature range (-40°C ~ 85°C)
• Maximum supply current (28mA)

Mechanical Compatibility Parameters:

• Package configuration (8-DIP, 4 Leads, Half Size, Metal Can)
• Through-hole mounting type
• Physical footprint (0.520" L x 0.520" W / 13.20mm x 13.20mm)
• Maximum seated height (0.213" / 5.40mm)

Environmental & Compliance Parameters:

• Moisture Sensitivity Level (MSL 1)
• REACH status (REACH Unaffected)
• ECCN classification (EAR99)
• HTSUS code (8542.39.0001)

Substitute parts must match all electrical, mechanical, and environmental parameters. Variations in RoHS compliance status do not preclude substitution but are noted for regulatory and procurement considerations.

Parameter Comparison

Engineering Selection Recommendations

The ECS-P83-ANX serves as a direct electrical and mechanical substitute for the ECS-P83-AN. Both components are manufactured by ECS Inc. and maintain identical specifications across all critical functional parameters including frequency range, output type, supply voltage, temperature range, and package configuration.

The primary distinction between these parts is RoHS compliance status. The ECS-P83-AN is RoHS non-compliant, while the ECS-P83-ANX is ROHS3 compliant. This difference is significant for applications subject to RoHS regulations or procurement policies requiring RoHS-compliant components.

Both parts are classified as active products with current inventory availability. Selection between ECS-P83-AN and ECS-P83-ANX should be based on regulatory requirements, supply chain preferences, and compliance mandates applicable to the end application. No functional or performance trade-offs exist between these alternatives.

Frequently Asked Questions (FAQ)

Q: Can the ECS-P83-ANX replace the ECS-P83-AN in existing designs?

A: Yes. The ECS-P83-ANX is electrically and mechanically equivalent to the ECS-P83-AN. All functional parameters, frequency specifications, output characteristics, supply voltage requirements, and package dimensions are identical. Direct substitution is supported without design modification.

Q: What is the difference between ECS-P83-AN and ECS-P83-ANX?

A: The primary difference is RoHS compliance status. The ECS-P83-AN is RoHS non-compliant, while the ECS-P83-ANX is ROHS3 compliant. All electrical and mechanical specifications are identical.

Q: Are there any pin configuration differences between these parts?

A: No. Both the ECS-P83-AN and ECS-P83-ANX use the same 8-DIP, 4-lead package configuration with identical pin assignments and functionality.

Q: Do these oscillators require any special handling or storage considerations?

A: Both parts are classified as Moisture Sensitivity Level 1 (Unlimited), indicating no special moisture control requirements during storage or handling.

Q: Can these programmable oscillators be used interchangeably across different frequency settings?

A: Yes. Both the ECS-P83-AN and ECS-P83-ANX support the full frequency range of 1 MHz to 125 MHz. Frequency selection is programmed by the supplier during manufacturing based on customer specifications.

Q: What is the frequency stability specification for these oscillators?

A: Both parts maintain a frequency stability of ±100ppm across the operating temperature range of -40°C to 85°C.

Q: Are these parts suitable for high-temperature applications?

A: Both parts are rated for operation up to 85°C maximum. Applications requiring operation above this temperature require alternative component selection.