ECS-P145-B Equivalent & Substitute Parts

Part Overview

The ECS-P145-B is an XO (Standard) programmable crystal oscillator manufactured by ECS Inc. This component operates across a frequency range of 1 MHz to 150 MHz with HCMOS output, 5V supply voltage, and Enable/Disable functionality. The device is housed in a 14-DIP, 4-lead full-size metal can package suitable for through-hole mounting applications. The ECS-P145-B maintains an active product status with 894 units currently in stock. Identifying equivalent and substitute parts is necessary to ensure design flexibility, manage supply chain continuity, and accommodate varying compliance requirements across different manufacturing batches and procurement channels.

Substiute Parts

ECS-P145-B

ECS Inc.In Stock: 919ECS-P145-B Datasheet

Current PartRFQ

ECS-P145-BX

ECS Inc.In Stock: 842ECS-P145-BX Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ECS-P145-B is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part must maintain identical specifications in the following areas:

Electrical Parameters:

• Frequency range: 1 MHz ~ 150 MHz
• Output logic: HCMOS
• Supply voltage: 5V
• Enable/Disable function capability
• Frequency stability: ±50ppm
• Operating temperature: 0°C ~ 70°C
• Maximum supply current: 45mA

Mechanical Parameters:

• Package configuration: 14-DIP, 4 Leads (Full Size, Metal Can)
• Mounting method: Through Hole
• Physical dimensions: 0.815" L x 0.508" W (20.70mm x 12.90mm)
• Maximum seated height: 0.197" (5.00mm)

Environmental & Compliance Parameters:

• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Status: REACH Unaffected
• ECCN classification: EAR99

The ECS-P145-BX qualifies as a direct substitute based on complete alignment with all specified parameters.

Parameter Comparison

Engineering Selection Recommendations

The ECS-P145-BX serves as a direct electrical and mechanical equivalent to the ECS-P145-B. Both components are manufactured by ECS Inc. and share identical specifications across all critical operating parameters, package dimensions, and environmental ratings.

A key distinction exists in RoHS compliance status. The ECS-P145-B is RoHS non-compliant, while the ECS-P145-BX is ROHS3 compliant. This difference is significant for applications subject to RoHS directives or procurement policies requiring RoHS-compliant components. Both parts maintain identical REACH and ECCN classifications.

Selection between these two parts should be based on the specific compliance requirements of the target application and end-use market. The ECS-P145-BX is the appropriate choice for designs requiring RoHS3 compliance. The ECS-P145-B remains suitable for applications without RoHS compliance mandates. Both parts are active products with adequate inventory availability.

Frequently Asked Questions (FAQ)

Q: Can the ECS-P145-BX be used as a direct replacement for the ECS-P145-B in existing designs?

A: Yes. The ECS-P145-BX is electrically and mechanically equivalent to the ECS-P145-B. All operating parameters, frequency ranges, output characteristics, supply voltage requirements, and package dimensions are identical. Pin-for-pin compatibility is maintained.

Q: What is the primary difference between these two parts?

A: The primary difference is RoHS compliance status. The ECS-P145-B is RoHS non-compliant, while the ECS-P145-BX is ROHS3 compliant. All other electrical, mechanical, and environmental specifications are identical.

Q: Are there any frequency limitations when substituting between these parts?

A: No. Both parts support the identical frequency range of 1 MHz to 150 MHz. Frequency selection is determined by the programmable configuration ordered through DiGi Electronics and does not vary between the two part numbers.

Q: Do these parts have different package dimensions or mounting requirements?

A: No. Both the ECS-P145-B and ECS-P145-BX use the same 14-DIP, 4-lead full-size metal can package with through-hole mounting. Physical dimensions, seated height, and PCB footprint requirements are identical.

Q: Which part should be selected for new designs?

A: For new designs, the ECS-P145-BX is the recommended choice due to its ROHS3 compliance status, which aligns with current regulatory requirements and industry standards. The ECS-P145-B remains suitable for legacy designs or applications without RoHS compliance mandates.

Q: Are the supply current specifications identical between these parts?

A: Yes. Both parts have a maximum supply current specification of 45mA at 5V supply voltage. Operating current characteristics are identical.

Q: Do these parts have different temperature operating ranges?

A: No. Both parts operate across the identical temperature range of 0°C to 70°C with the same frequency stability specification of ±50ppm across this range.