ECS-HCMPI-0503Q-R80M-T Equivalent & Substitute Parts

Part Overview

The ECS-HCMPI-0503Q-R80M-T is an 800 nH shielded molded inductor manufactured by ECS Inc., rated for 13.1 A continuous current with a maximum DC resistance of 5.65 mOhm. This surface mount component is designed for high-current applications requiring low inductance values with controlled impedance characteristics. The part maintains Active product status and is available in standard inventory quantities. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance certifications align with the original component requirements.

Substiute Parts

ECS-HCMPI-0503Q-R80M-T

ECS Inc.In Stock: 1914ECS-HCMPI-0503Q-R80M-T Datasheet

Current PartRFQ

ASPIAIG-F5030-R80M-T

Abracon LLCIn Stock: 660ASPIAIG-F5030-R80M-T Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ECS-HCMPI-0503Q-R80M-T are qualified based on strict electrical and mechanical parameter alignment. The following criteria determine substitution eligibility:

Electrical Parameters:

• Inductance value: 800 nH with ±20% tolerance
• Current rating: 13.1 A minimum continuous current
• Saturation current (Isat): 18 A minimum
• DC resistance: 5.65 mOhm maximum
• Shielding: Shielded construction required

Mechanical Parameters:

• Mounting type: Surface mount
• Package footprint: 5030 (0.217" L x 0.209" W / 5.50mm x 5.30mm)
• Maximum seated height: 0.122" (3.10mm)
• Component type: Molded inductor

Compliance & Environmental:

• AEC-Q200 rating required
• Operating temperature range: -40°C ~ 125°C
• RoHS3 compliance required
• REACH unaffected status
• Inductance test frequency: 100 kHz
• MSL rating: 1 (Unlimited)

Parameter Comparison

Engineering Selection Recommendations

Both the ECS-HCMPI-0503Q-R80M-T and ASPIAIG-F5030-R80M-T maintain Active product status with full AEC-Q200 compliance, indicating suitability for automotive and high-reliability applications. Both components satisfy ROHS3 compliance requirements and carry MSL 1 (Unlimited) moisture sensitivity ratings, eliminating moisture-related handling constraints.

The ASPIAIG-F5030-R80M-T from Abracon LLC provides direct electrical and mechanical equivalence to the ECS Inc. original component. Selection between these parts may be based on supply chain availability, lead time requirements, or established vendor relationships, as all specified electrical parameters, mechanical dimensions, and compliance certifications are identical.

Frequently Asked Questions (FAQ)

Q: What determines if a part can substitute for the ECS-HCMPI-0503Q-R80M-T?

A: Substitute parts must match the following criteria: 800 nH inductance with ±20% tolerance, 13.1 A continuous current rating, 18 A saturation current, 5.65 mOhm maximum DC resistance, shielded construction, 5030 package footprint (5.50mm x 5.30mm), maximum 3.10mm seated height, AEC-Q200 rating, -40°C to 125°C operating range, and ROHS3 compliance.

Q: Are the mechanical dimensions identical between the main part and substitute?

A: Yes. Both the ECS-HCMPI-0503Q-R80M-T and ASPIAIG-F5030-R80M-T share identical footprint dimensions (0.217" L x 0.209" W / 5.50mm x 5.30mm) and maximum seated height (0.122" / 3.10mm), ensuring direct PCB layout compatibility.

Q: Do both parts require the same handling and storage conditions?

A: Yes. Both components carry MSL 1 (Unlimited) moisture sensitivity ratings, eliminating moisture-related storage and handling restrictions. Standard component storage practices apply.

Q: Can these parts be used interchangeably in high-current applications?

A: Yes. Both parts are rated for 13.1 A continuous current with 18 A saturation current and identical DC resistance specifications, making them functionally equivalent for high-current circuit designs.

Q: What compliance certifications apply to both parts?

A: Both components are AEC-Q200 rated, ROHS3 compliant, and REACH unaffected, meeting automotive and industrial reliability standards.