ECS-HCMPI-0503Q-R16M-T Equivalent & Substitute Parts

Part Overview

The ECS-HCMPI-0503Q-R16M-T is a 160 nH shielded molded inductor manufactured by ECS Inc., designed for surface mount applications requiring high current handling and low DC resistance. This component is actively produced and widely used in power conversion, filtering, and signal integrity applications. Equivalent parts may be required due to supply chain constraints, regional availability, or procurement preferences while maintaining identical electrical and mechanical specifications.

Substiute Parts

ECS-HCMPI-0503Q-R16M-T

ECS Inc.In Stock: 1126ECS-HCMPI-0503Q-R16M-T Datasheet

Current PartRFQ

ASPIAIG-F5030-R16M-T

Abracon LLCIn Stock: 977ASPIAIG-F5030-R16M-T Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The ASPIAIG-F5030-R16M-T from Abracon LLC qualifies as a direct substitute based on matching all critical electrical and mechanical parameters. Substitution eligibility is determined by the following criteria:

• Identical inductance value: 160 nH at ±20% tolerance
• Identical current rating: 22.2 A continuous
• Identical saturation current: 32 A
• Identical DC resistance: 2.33 mOhm maximum
• Identical shielding classification: Shielded
• Identical package designation: 5030 nonstandard
• Identical physical dimensions: 5.50mm L × 5.30mm W × 3.10mm H max
• Identical thermal operating range: -40°C to 125°C
• Identical compliance certifications: AEC-Q200, ROHS3, REACH Unaffected

Parameter Comparison

Engineering Selection Recommendations

Both the ECS-HCMPI-0503Q-R16M-T and ASPIAIG-F5030-R16M-T are active production components with identical electrical performance and mechanical compatibility. Selection between these parts may be based on:

• Supplier availability and lead time
• Regional procurement requirements
• Inventory status and stock levels
• Manufacturer qualification requirements for specific applications
• Cost considerations within equivalent specifications

Both components meet AEC-Q200 automotive-grade reliability standards and ROHS3 environmental compliance requirements, making them suitable for applications requiring automotive or industrial-grade component qualification.

Frequently Asked Questions (FAQ)

Q: Can ASPIAIG-F5030-R16M-T be used as a direct replacement for ECS-HCMPI-0503Q-R16M-T?

A: Yes. Both parts share identical electrical specifications (160 nH inductance, 22.2 A rating, 2.33 mOhm DCR), mechanical dimensions (5030 package, 5.50mm × 5.30mm × 3.10mm), and compliance certifications (AEC-Q200, ROHS3). They are functionally interchangeable in circuit applications.

Q: Are there any package or footprint differences between these parts?

A: No. Both components use the identical 5030 nonstandard package with matching physical dimensions and surface mount compatibility. PCB footprints and assembly processes remain unchanged.

Q: Do both parts meet the same compliance standards?

A: Yes. Both the ECS and Abracon parts are AEC-Q200 rated, ROHS3 compliant, and REACH unaffected. Moisture sensitivity level is identical at MSL 1 (unlimited).

Q: What is the operating temperature range for both parts?

A: Both parts operate across -40°C to 125°C, providing identical thermal performance and reliability across industrial and automotive temperature ranges.

Q: Are there differences in current handling capability?

A: No. Both parts have identical continuous current rating of 22.2 A and saturation current of 32 A, ensuring equivalent performance in high-current applications.