ECS-HCMPI-0503Q-2R2M-T Equivalent & Substitute Parts

Part Overview

The ECS-HCMPI-0503Q-2R2M-T is a 2.2 µH shielded molded inductor manufactured by ECS Inc., rated for 9.7 A continuous current with a maximum DC resistance of 14.5 mOhm. This component is designed for surface mount applications in the 5030 package format and maintains active product status with full AEC-Q200 compliance. Substitute parts are identified when equivalent electrical and mechanical specifications are required due to supply constraints, design flexibility, or manufacturing availability.

Substiute Parts

ECS-HCMPI-0503Q-2R2M-T

ECS Inc.In Stock: 1365ECS-HCMPI-0503Q-2R2M-T Datasheet

Current PartRFQ

ASPIAIG-F5030-2R2M-T

Abracon LLCIn Stock: 1011ASPIAIG-F5030-2R2M-T Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ECS-HCMPI-0503Q-2R2M-T is determined by strict equivalence across the following critical parameters:

• Inductance value: 2.2 µH with ±20% tolerance
• Current rating: 9.7 A minimum
• Saturation current (Isat): 9 A minimum
• DC resistance: 14.5 mOhm maximum
• Shielding: Shielded construction required
• Package format: 5030 nonstandard case
• Physical dimensions: 5.50mm L x 5.30mm W x 3.10mm H maximum
• Operating temperature: -40°C to 125°C
• Surface mount configuration
• AEC-Q200 compliance

The ASPIAIG-F5030-2R2M-T from Abracon LLC meets all specified electrical and mechanical parameters and qualifies as a direct substitute.

Parameter Comparison

Engineering Selection Recommendations

Both the ECS-HCMPI-0503Q-2R2M-T and ASPIAIG-F5030-2R2M-T maintain active product status and carry AEC-Q200 certification, confirming suitability for automotive and high-reliability applications. Both components are ROHS3 compliant and carry MSL Level 1 moisture sensitivity ratings, indicating no special storage or handling requirements. The electrical and mechanical specifications are identical across all critical parameters, including inductance, current ratings, DC resistance, physical dimensions, and operating temperature range. Selection between these parts may be based on supply availability, packaging format preference (Tape & Reel versus Cut Tape & Digi-Reel), or procurement lead time considerations.

Frequently Asked Questions (FAQ)

Q: Can the ASPIAIG-F5030-2R2M-T be used as a direct replacement for the ECS-HCMPI-0503Q-2R2M-T?

A: Yes. Both parts share identical electrical specifications (2.2 µH inductance, 9.7 A current rating, 14.5 mOhm DCR), mechanical dimensions (5030 package, 5.50mm x 5.30mm x 3.10mm), and compliance certifications (AEC-Q200, ROHS3). No circuit modifications are required.

Q: Are there differences in packaging between these two parts?

A: The ECS-HCMPI-0503Q-2R2M-T is supplied in Tape & Reel (TR) format. The ASPIAIG-F5030-2R2M-T is available in Cut Tape (CT) and Digi-Reel format. Both packaging options are suitable for automated assembly processes.

Q: Do both parts meet automotive qualification standards?

A: Yes. Both the ECS-HCMPI-0503Q-2R2M-T and ASPIAIG-F5030-2R2M-T carry AEC-Q200 certification, confirming compliance with automotive reliability and quality standards.

Q: What is the moisture sensitivity level for these inductors?

A: Both parts are rated MSL Level 1 (Unlimited), indicating no moisture-related storage or handling restrictions.

Q: Are there any environmental or regulatory compliance differences?

A: No. Both parts are ROHS3 compliant, REACH unaffected, and classified under ECCN EAR99 with identical HTSUS codes (8504.50.8000).