ECS-60-32-1 Equivalent & Substitute Parts

Part Overview

The ECS-60-32-1 is a 6 MHz through-hole crystal oscillator in HC-49/U package with 32pF load capacitance and 40 Ohms equivalent series resistance. This component is classified as Not For New Designs, indicating it has been superseded in the manufacturer's product line. Finding equivalent substitute parts is necessary for maintenance, repair, and legacy system support where original components are unavailable or inventory is depleted.

Substiute Parts

ECS-60-32-1

ECS Inc.In Stock: 970ECS-60-32-1 Datasheet

Current PartRFQ

ECS-60-32-1X

ECS Inc.In Stock: 2009ECS-60-32-1X Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the ECS-60-32-1 is determined by strict equivalence across the following critical parameters:

• Frequency: 6 MHz (exact match required)
• Frequency Tolerance: ±30ppm (exact match required)
• Load Capacitance: 32pF (exact match required)
• ESR: 40 Ohms (exact match required)
• Package / Case: HC-49/U (exact match required)
• Mounting Type: Through Hole (exact match required)
• Operating Temperature Range: -10°C ~ 70°C (exact match required)

The ECS-60-32-1X meets all these criteria and qualifies as a parametric equivalent substitute.

Parameter Comparison

Engineering Selection Recommendations

The ECS-60-32-1X is the direct parametric equivalent for the ECS-60-32-1. All electrical and mechanical specifications are identical. The primary distinction is product status: the ECS-60-32-1X is Active, whereas the original part is Not For New Designs. Additionally, the ECS-60-32-1X achieves ROHS3 compliance, whereas the original part is RoHS non-compliant. For applications requiring regulatory compliance or long-term component availability, the ECS-60-32-1X is the appropriate selection. Both parts share identical moisture sensitivity classification and export control designations.

Frequently Asked Questions (FAQ)

Q: Can the ECS-60-32-1X be used as a direct replacement for the ECS-60-32-1?

A: Yes. The ECS-60-32-1X is a parametric equivalent with identical frequency, load capacitance, ESR, package, and operating temperature specifications. Pin-to-pin and footprint compatibility is maintained.

Q: What is the difference between these two parts?

A: The ECS-60-32-1X is the active production equivalent. The original ECS-60-32-1 is marked Not For New Designs. The substitute part also achieves ROHS3 compliance, whereas the original is RoHS non-compliant.

Q: Are the physical dimensions identical?

A: Yes. Both parts use the HC-49/U package with identical length, width, and maximum seated height specifications.

Q: Does the substitute part have the same load capacitance and ESR?

A: Yes. Both parts specify 32pF load capacitance and 40 Ohms ESR, ensuring circuit compatibility without modification.

Q: What is the operating temperature range for both parts?

A: Both parts operate across -10°C to 70°C.

Q: Are there any compliance differences?

A: The ECS-60-32-1X is ROHS3 compliant, while the original ECS-60-32-1 is RoHS non-compliant. Both are REACH Unaffected and classified as EAR99 for export control purposes.