ECS-60-18-10 Equivalent & Substitute Parts

Part Overview

The ECS-60-18-10 is a 6 MHz through-hole crystal oscillator with 18pF load capacitance and 100 Ohms equivalent series resistance, housed in a cylindrical can radial package. This component is classified as Active product status and is currently in stock with 1185 pieces available. Finding equivalent substitute parts is necessary when the primary part becomes unavailable, when design revisions require RoHS compliance, or when alternative sourcing is required to optimize supply chain logistics.

Substiute Parts

ECS-60-18-10

ECS Inc.In Stock: 1251ECS-60-18-10 Datasheet

Current PartRFQ

ECS-60-18-10X

ECS Inc.In Stock: 5623ECS-60-18-10X Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ECS-60-18-10 is determined by strict equivalence across the following critical parameters:

• Frequency: 6 MHz (exact match required)
• Frequency Stability: ±50ppm (exact match required)
• Load Capacitance: 18pF (exact match required)
• ESR: 100 Ohms (exact match required)
• Operating Mode: Fundamental (exact match required)
• Operating Temperature Range: -10°C ~ 60°C (exact match required)
• Mounting Type: Through Hole (exact match required)
• Package / Case: Cylindrical Can, Radial (exact match required)
• Physical Dimensions: 0.126" Dia x 0.413" L (exact match required)

The ECS-60-18-10X meets all substitution criteria as a parametric equivalent. Both parts share identical electrical specifications, mechanical dimensions, and functional characteristics. The primary distinction between these parts is RoHS compliance status and series designation.

Parameter Comparison

Engineering Selection Recommendations

Both ECS-60-18-10 and ECS-60-18-10X are functionally equivalent for circuit applications requiring a 6 MHz crystal with 18pF load capacitance and 100 Ohms ESR in a through-hole cylindrical can package.

The ECS-60-18-10X is ROHS3 compliant, whereas the ECS-60-18-10 is RoHS non-compliant. For designs subject to RoHS3 regulatory requirements or environmental compliance mandates, the ECS-60-18-10X is the appropriate selection.

The ECS-60-18-10X maintains higher inventory availability at 5532 pieces compared to 1185 pieces for the ECS-60-18-10, providing improved supply chain reliability for production volumes.

Both parts share identical electrical performance, mechanical dimensions, operating temperature range, and regulatory classifications (REACH Unaffected, ECCN EAR99, HTSUS 8541.60.0050).

Frequently Asked Questions (FAQ)

Q: Can ECS-60-18-10X be used as a direct replacement for ECS-60-18-10?

A: Yes. The ECS-60-18-10X is a parametric equivalent with identical frequency, load capacitance, ESR, operating temperature range, and physical dimensions. No circuit modifications are required for substitution.

Q: What is the difference between ECS-60-18-10 and ECS-60-18-10X?

A: The primary differences are RoHS compliance status (ECS-60-18-10X is ROHS3 compliant; ECS-60-18-10 is non-compliant) and inventory availability (ECS-60-18-10X has 5532 pieces in stock versus 1185 pieces for ECS-60-18-10). All electrical and mechanical specifications are identical.

Q: Are both parts suitable for the same PCB footprint?

A: Yes. Both parts use identical through-hole cylindrical can radial packaging with dimensions of 0.126" diameter by 0.413" length (3.20mm x 10.50mm). PCB layout and footprint design remain unchanged between the two parts.

Q: Which part should be selected for new designs?

A: For new designs subject to RoHS3 compliance requirements, select ECS-60-18-10X. For applications without RoHS compliance mandates, either part is acceptable based on availability and supply chain considerations.

Q: Do both parts have the same operating temperature range?

A: Yes. Both ECS-60-18-10 and ECS-60-18-10X operate across the identical temperature range of -10°C to 60°C with ±50ppm frequency stability.