ECS-110.5-32-1 Crystal Equivalent & Substitute Parts

Part Overview

The ECS-110.5-32-1 is a 11.0592 MHz through-hole crystal oscillator in HC-49/U package with 32pF load capacitance and 30 Ohms equivalent series resistance. This component is classified as "Not For New Designs," indicating it has been superseded in the manufacturer's product line. Finding equivalent substitute parts is necessary for maintenance, repair, and legacy system support where this specific frequency and package configuration is required.

Substiute Parts

ECS-110.5-32-1

ECS Inc.In Stock: 994ECS-110.5-32-1 Datasheet

Current PartRFQ

ECS-110.5-32-1X

ECS Inc.In Stock: 2653ECS-110.5-32-1X Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the ECS-110.5-32-1 is determined by strict equivalence across the following critical parameters:

• Frequency: 11.0592 MHz (exact match required)
• Load Capacitance: 32pF (exact match required)
• ESR: 30 Ohms (exact match required)
• Package / Case: HC-49/U (exact match required)
• Mounting Type: Through Hole (exact match required)
• Operating Temperature Range: -10°C ~ 70°C (minimum required)
• Operating Mode: Fundamental (exact match required)

The substitute part ECS-110.5-32-1X meets all these criteria and is therefore a direct parametric equivalent suitable for replacement in applications requiring the ECS-110.5-32-1.

Parameter Comparison

Engineering Selection Recommendations

The ECS-110.5-32-1X is the direct parametric equivalent for the ECS-110.5-32-1. All electrical and mechanical specifications are identical. The primary distinction is product status: the ECS-110.5-32-1X is classified as Active, whereas the original part is Not For New Designs. Additionally, the ECS-110.5-32-1X offers ROHS3 compliance, compared to the non-compliant status of the original part. Both parts share identical frequency, load capacitance, ESR, package configuration, and operating temperature range, making them functionally interchangeable in through-hole applications requiring 11.0592 MHz crystals with 32pF load capacitance.

Frequently Asked Questions (FAQ)

Q: Can the ECS-110.5-32-1X be used as a direct replacement for the ECS-110.5-32-1?

A: Yes. The ECS-110.5-32-1X is a parametric equivalent with identical electrical and mechanical specifications. All critical parameters—frequency, load capacitance, ESR, package type, and operating temperature range—match exactly.

Q: What is the difference between these two parts?

A: The ECS-110.5-32-1X is the active production version, while the ECS-110.5-32-1 is classified as Not For New Designs. The substitute also offers ROHS3 compliance. Functionally, they are equivalent.

Q: Are both parts in the same HC-49/U package?

A: Yes. Both the ECS-110.5-32-1 and ECS-110.5-32-1X use the HC-49/U through-hole package with identical physical dimensions: 0.447" L x 0.183" W (11.35mm x 4.65mm), with a maximum seated height of 0.530" (13.46mm).

Q: Do these crystals have the same frequency tolerance?

A: Yes. Both parts have a frequency tolerance of ±30ppm and frequency stability of ±50ppm, ensuring equivalent performance in frequency-critical applications.

Q: What load capacitance do these crystals require?

A: Both crystals require 32pF load capacitance and have an ESR of 30 Ohms. These specifications must be matched in the circuit design for proper oscillation.

Q: Are there any compliance differences between the two parts?

A: The ECS-110.5-32-1X is ROHS3 compliant, while the ECS-110.5-32-1 is RoHS non-compliant. Both are REACH Unaffected and classified under ECCN EAR99.