ECO-S1HP562BA Equivalent & Substitute Parts

Part Overview

The ECO-S1HP562BA is a 5600 µF, 50 V aluminum electrolytic capacitor manufactured by Panasonic Electronic Components in the TS-UP series. This component features a radial, can snap-in package with through-hole mounting and is rated for 3000 hours at 85°C. The part is currently obsolete, making equivalent and substitute parts necessary for ongoing system support and new designs requiring this capacitance and voltage rating.

Key Parameters

Parameter	Value
Capacitance	5600 µF
Voltage Rating	50 V
Tolerance	±20%
Package Type	Radial, Can - Snap-In
Mounting Type	Through Hole
Lead Spacing	0.394" (10.00 mm)
Operating Temperature Range	-40°C to 85°C
Polarization	Polar
Lifetime @ Temperature	3000 Hrs @ 85°C

Substitute Part Grouping Explanation

Substitution for the ECO-S1HP562BA is determined by strict adherence to the following electrical and mechanical parameters:

Capacitance: 5600 µF (exact match required)
Voltage Rating: 50 V (exact match required)
Tolerance: ±20% (exact match required)
Package Type: Radial, Can - Snap-In (exact match required)
Mounting Type: Through Hole (exact match required)
Lead Spacing: 0.394" (10.00 mm) (exact match required)
Operating Temperature Range: -40°C to 85°C (exact match required)
Polarization: Polar (exact match required)

All substitute parts listed meet these core parameters. Variations in physical dimensions (diameter and height), ESR values, ripple current ratings, and product status are noted but do not disqualify substitution when the above parameters are met.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Capacitance	Voltage	Tolerance	Package Type	Lead Spacing	Lifetime @ 85°C	Operating Temp Range	Product Status
ECO-S1HP562BA	Panasonic Electronic Components	5600 µF	50 V	±20%	Radial, Can - Snap-In	0.394" (10.00 mm)	3000 Hrs	-40°C ~ 85°C	Obsolete
50USG5600MEFCSN22X40	Rubycon	5600 µF	50 V	±20%	Radial, Can - Snap-In	0.394" (10.00 mm)	3000 Hrs	-40°C ~ 85°C	Active
380LX562M050J032	Cornell Dubilier Electronics (CDE)	5600 µF	50 V	±20%	Radial, Can - Snap-In	0.394" (10.00 mm)	3000 Hrs	-40°C ~ 85°C	Active
380LX562M050K022	Cornell Dubilier Electronics (CDE)	5600 µF	50 V	±20%	Radial, Can - Snap-In	0.394" (10.00 mm)	3000 Hrs	-40°C ~ 85°C	Active
B41231A6568M000	EPCOS - TDK Electronics	5600 µF	50 V	±20%	Radial, Can - Snap-In	0.394" (10.00 mm)	2000 Hrs	-40°C ~ 85°C	Active
SLPX562M050A4P3	Cornell Dubilier Electronics (CDE)	5600 µF	50 V	±20%	Radial, Can - Snap-In	0.394" (10.00 mm)	3000 Hrs	-40°C ~ 85°C	Active
SLPX562M050C5P3	Cornell Dubilier Electronics (CDE)	5600 µF	50 V	±20%	Radial, Can - Snap-In	0.394" (10.00 mm)	3000 Hrs	-40°C ~ 85°C	Active
SLPX562M050E3P3	Cornell Dubilier Electronics (CDE)	5600 µF	50 V	±20%	Radial, Can - Snap-In	0.394" (10.00 mm)	3000 Hrs	-40°C ~ 85°C	Active
SLPX562M050A7P3	Cornell Dubilier Electronics (CDE)	5600 µF	50 V	±20%	Radial, Can - Snap-In	0.394" (10.00 mm)	3000 Hrs	-40°C ~ 85°C	Active

Engineering Selection Recommendations

All listed substitute parts meet the core electrical and mechanical parameters required for direct substitution with the ECO-S1HP562BA. Selection should be based on the following factors:

Product Status: The Rubycon 50USG5600MEFCSN22X40, Cornell Dubilier Electronics parts (380LX562M050J032, 380LX562M050K022, SLPX562M050A4P3, SLPX562M050C5P3, SLPX562M050E3P3, SLPX562M050A7P3), and EPCOS B41231A6568M000 are all active products with current manufacturing support.

Compliance: The Rubycon and Cornell Dubilier parts carry ROHS3 compliance. The EPCOS part is ROHS3 compliant. All parts are classified under ECCN EAR99 and HTSUS 8532.22.0040.

Lifetime Rating: Most substitute parts are rated for 3000 hours at 85°C, matching the original specification. The EPCOS B41231A6568M000 is rated for 2000 hours at 85°C, which represents a reduced lifetime specification.

Physical Dimensions: While all parts maintain the required lead spacing of 0.394" (10.00 mm), physical dimensions (diameter and height) vary. Verify mechanical fit within the target application before final selection.

Frequently Asked Questions (FAQ)

Q: Can I substitute the ECO-S1HP562BA with any of the listed parts?

A: Yes. All listed parts meet the core substitution parameters: 5600 µF capacitance, 50 V voltage rating, ±20% tolerance, radial snap-in package, through-hole mounting, 0.394" lead spacing, and -40°C to 85°C operating range. Verify mechanical fit due to variations in physical dimensions.

Q: What is the difference between the substitute parts?

A: All substitute parts share identical electrical specifications. Differences exist in manufacturer, ESR characteristics, ripple current ratings, physical dimensions, and product lifetime ratings. The EPCOS B41231A6568M000 has a reduced lifetime rating of 2000 hours at 85°C compared to 3000 hours for other options.

Q: Does the physical size variation matter?

A: Physical dimensions vary across substitute parts. The original ECO-S1HP562BA has a diameter of 0.866" (22.00 mm) and height of 1.575" (40.00 mm). Substitute parts range from 0.866" to 1.181" in diameter and 1.181" to 1.850" in height. Verify that the selected substitute fits within the available PCB space and mounting constraints.

Q: Are all substitute parts RoHS compliant?

A: The Rubycon 50USG5600MEFCSN22X40 and all Cornell Dubilier SLPX and 380LX series parts are ROHS3 compliant. The EPCOS B41231A6568M000 is also ROHS3 compliant. Compliance information is available in the detailed specifications.

Q: Which substitute has the highest inventory availability?

A: The SLPX562M050A7P3 from Cornell Dubilier Electronics has the highest inventory with 10,605 pieces in stock. Other parts range from 660 to 2,264 pieces in stock.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message