ECO-S1HA562EA Equivalent & Substitute Parts

Part Overview

The ECO-S1HA562EA is a 5600 µF, 50 V aluminum electrolytic capacitor in radial, can snap-in package manufactured by Panasonic Electronic Components. This component is classified as obsolete, making equivalent and substitute parts necessary for ongoing system support and new design implementations. The part operates across a temperature range of -40°C to 105°C with a rated lifetime of 3000 hours at 105°C, serving general-purpose applications requiring high capacitance values in compact form factors.

Key Parameters

Parameter	Value
Capacitance	5600 µF
Voltage Rating	50 V
Tolerance	±20%
ESR @ 120 Hz	50 mOhm
Lifetime @ 105°C	3000 Hours
Operating Temperature Range	-40°C to 105°C
Ripple Current @ 120 Hz	2.8 A
Ripple Current @ 100 kHz	3.22 A
Lead Spacing	10.00 mm
Case Diameter	35.00 mm
Height (Seated)	32.00 mm
Package Type	Radial, Can - Snap-In
Mounting Type	Through Hole
Polarization	Polar

Substitute Part Grouping Explanation

Substitution eligibility for the ECO-S1HA562EA is determined by the following mandatory parameters:

Direct Equivalents maintain all critical electrical and mechanical specifications: 5600 µF capacitance, 50 V voltage rating, ±20% tolerance, 10.00 mm lead spacing, 35.00 mm case diameter, and radial snap-in package configuration. These parts are interchangeable without circuit redesign.

Upgrade Substitutes improve performance characteristics while maintaining the same capacitance, voltage rating, tolerance, and physical footprint. These parts offer extended lifetime ratings or enhanced ripple current handling at identical voltage and capacitance values.

Similar Parts share the same capacitance value and package type but differ in voltage rating, physical dimensions, or performance characteristics. These require circuit evaluation to confirm suitability, as they may not be direct pin-for-pin replacements.

Parameter Comparison

Part Number	Manufacturer	Capacitance	Voltage	Tolerance	Lifetime @ 105°C	Case Dia (mm)	Height (mm)	Product Status	RoHS Status
ECO-S1HA562EA	Panasonic	5600 µF	50 V	±20%	3000 Hrs	35.00	32.00	Obsolete	REACH Affected
381LX562M050A022	Cornell Dubilier	5600 µF	50 V	±20%	3000 Hrs	35.00	32.00	Active	ROHS3 Compliant
50VXG5600MEFC35X30	Rubycon	5600 µF	50 V	±20%	5000 Hrs	35.00	32.00	Active	ROHS3 Compliant
100MXG5600MEFCSN35X45	Rubycon	5600 µF	100 V	±20%	3000 Hrs	35.00	47.00	Active	ROHS3 Compliant
381LX562M050K032	Cornell Dubilier	5600 µF	50 V	±20%	3000 Hrs	30.00	37.00	Active	ROHS3 Compliant
63MXG5600MEFCSN35X25	Rubycon	5600 µF	63 V	±20%	3000 Hrs	35.00	27.00	Active	ROHS3 Compliant
80VXG5600MEFC35X50	Rubycon	5600 µF	80 V	±20%	5000 Hrs	35.00	52.00	Active	RoHS non-compliant
80VXG5600MEFCSN35X50	Rubycon	5600 µF	80 V	±20%	5000 Hrs	35.00	52.00	Active	ROHS3 Compliant
LP562M050H5P3	Cornell Dubilier	5600 µF	50 V	±20%	1000 Hrs	35.00	35.00	Active	ROHS3 Compliant
SLP562M050A9P3	Cornell Dubilier	5600 µF	50 V	±20%	3000 Hrs	22.00	50.00	Active	ROHS3 Compliant
SLP562M050C7P3	Cornell Dubilier	5600 µF	50 V	±20%	3000 Hrs	25.00	40.00	Active	ROHS3 Compliant

Engineering Selection Recommendations

Direct Equivalent Selection: The 381LX562M050A022 from Cornell Dubilier Electronics is the primary direct equivalent. It maintains identical electrical specifications (5600 µF, 50 V, ±20% tolerance, 3000 Hrs @ 105°C) and physical dimensions (35.00 mm diameter, 32.00 mm height). This part is active in production and ROHS3 compliant, addressing the obsolescence of the ECO-S1HA562EA.

Upgrade Selection: The 50VXG5600MEFC35X30 from Rubycon provides an upgrade path with extended lifetime (5000 Hrs @ 105°C) while maintaining identical footprint and electrical ratings. This part is active and ROHS3 compliant, suitable for applications requiring enhanced reliability.

Alternative Selections for Constrained Geometries: The 381LX562M050K032 offers the same electrical performance as the direct equivalent but with reduced case diameter (30.00 mm) and increased height (37.00 mm), accommodating space-constrained PCB layouts. The SLP562M050C7P3 provides a more compact radial option with 25.00 mm diameter and 40.00 mm height, maintaining 3000-hour lifetime at 105°C.

Higher Voltage Alternatives: Parts rated at 63 V (63MXG5600MEFCSN35X25) and 80 V (80VXG5600MEFCSN35X50) maintain the same 35.00 mm case diameter but with different heights. These are suitable only for circuits where higher voltage rating is acceptable and does not conflict with PCB layout constraints.

Not Recommended: The LP562M050H5P3 has reduced lifetime (1000 Hrs @ 105°C) compared to the original specification and should be avoided for applications requiring the full 3000-hour rating.

Frequently Asked Questions (FAQ)

Q: Can I use 381LX562M050A022 as a direct replacement for ECO-S1HA562EA? A: Yes. Both parts share identical capacitance (5600 µF), voltage rating (50 V), tolerance (±20%), lead spacing (10.00 mm), case diameter (35.00 mm), and height (32.00 mm). The 381LX562M050A022 is pin-compatible and electrically equivalent.

Q: What is the advantage of 50VXG5600MEFC35X30 over the direct equivalent? A: The 50VXG5600MEFC35X30 extends the rated lifetime from 3000 hours to 5000 hours at 105°C while maintaining identical physical footprint and electrical specifications. This upgrade improves long-term reliability in high-temperature applications.

Q: Can I use a higher voltage-rated part like 80VXG5600MEFCSN35X50? A: Higher voltage-rated parts are electrically compatible in circuits designed for 50 V operation, as they provide greater voltage margin. However, the 80VXG5600MEFCSN35X50 has increased height (52.00 mm vs. 32.00 mm), which may conflict with PCB layout constraints. Verify mechanical clearance before substitution.

Q: Why do some parts have different case diameters? A: Manufacturers optimize case geometry based on internal construction and performance targets. Parts like SLP562M050A9P3 (22.00 mm diameter) and SLP562M050C7P3 (25.00 mm diameter) achieve the same capacitance and voltage through different internal designs, offering space-saving alternatives for constrained layouts.

Q: Is the LP562M050H5P3 suitable for my application? A: The LP562M050H5P3 has a reduced lifetime rating of 1000 hours at 105°C, compared to 3000 hours for the original part. Use this part only if your application requires less than 1000 hours of operation at 105°C.

Q: What does ROHS3 compliance mean for my selection? A: ROHS3 compliance indicates the part meets Restriction of Hazardous Substances regulations. Most active substitute parts are ROHS3 compliant. The original ECO-S1HA562EA is marked as REACH Affected, while active substitutes are REACH Unaffected, reducing regulatory risk in new designs.

Q: Can I mix different substitute parts in the same circuit? A: Yes, provided all selected parts meet the circuit's electrical requirements (5600 µF, 50 V minimum rating, ±20% tolerance). However, maintain consistent part selection within a single PCB assembly to ensure uniform performance and simplify inventory management.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message