ECO-S1EA562AA Equivalent & Substitute Parts

Part Overview

The ECO-S1EA562AA is a 5600 µF, 25 V aluminum electrolytic capacitor in radial, can snap-in package manufactured by Panasonic Electronic Components. This component is classified as obsolete, making equivalent substitute parts necessary for ongoing system support and new design implementations. The part belongs to the TS-HA series and is designed for general-purpose applications requiring stable capacitance performance across extended temperature ranges.

Substiute Parts

ECO-S1EA562AA

Panasonic Electronic ComponentsIn Stock: 1012ECO-S1EA562AA Datasheet

Current PartRFQ

35MXG5600MEFCSN20X40

RubyconIn Stock: 127035MXG5600MEFCSN20X40 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ECO-S1EA562AA is determined by the following critical parameters:

• Capacitance Value: Must match 5600 µF exactly
• Tolerance: Must be ±20% or tighter
• Package Type: Must be Radial, Can - Snap-In
• Lead Spacing: Must be 0.394" (10.00mm)
• Physical Diameter: Must be 0.787" (20.00mm)
• Mounting Type: Must be Through Hole
• Operating Temperature Range: Must support -40°C ~ 105°C minimum
• Lifetime Rating: Must meet or exceed 3000 Hrs @ 105°C

The substitute part 35MXG5600MEFCSN20X40 (Rubycon MXG series) satisfies all mechanical and electrical compatibility requirements. The rated voltage is higher (35 V vs. 25 V), which is acceptable as higher voltage ratings provide backward compatibility in circuits designed for lower voltages. The physical height difference (42.00mm vs. 37.00mm) must be evaluated for board layout constraints.

Parameter Comparison

Engineering Selection Recommendations

The 35MXG5600MEFCSN20X40 (Rubycon MXG series) is a direct functional substitute for the obsolete ECO-S1EA562AA. Selection should be based on the following factors:

Product Status: The Rubycon part is active and in production, ensuring long-term availability and supply chain stability compared to the obsolete Panasonic component.

Compliance: The Rubycon substitute is ROHS3 compliant, whereas the original part is RoHS non-compliant. This distinction is critical for applications subject to regulatory compliance requirements.

Voltage Rating: The higher 35 V rating of the substitute provides operational margin in circuits originally designed for 25 V operation, with no functional degradation.

Physical Dimensions: The 5 mm height increase (42.00mm vs. 37.00mm) must be verified against PCB layout constraints and enclosure clearances before implementation.

Electrical Performance: Both parts maintain identical capacitance, tolerance, and thermal lifetime specifications, ensuring equivalent circuit performance.

Frequently Asked Questions (FAQ)

Q: Can the 35MXG5600MEFCSN20X40 be used as a direct replacement for ECO-S1EA562AA?

A: Yes, the Rubycon part meets all mechanical and electrical compatibility requirements. The higher voltage rating (35 V vs. 25 V) is acceptable for circuits designed for 25 V operation. Physical height must be verified for board layout compatibility.

Q: What is the significance of the voltage rating difference?

A: A higher voltage rating provides operational margin and does not degrade performance in lower-voltage circuits. The 35 V substitute will function correctly in applications rated for 25 V.

Q: Are there any compliance differences between the two parts?

A: Yes. The original ECO-S1EA562AA is RoHS non-compliant, while the Rubycon substitute is ROHS3 compliant. This is relevant for applications subject to environmental and regulatory standards.

Q: What is the impact of the 5 mm height difference?

A: The substitute is 5 mm taller (42.00mm vs. 37.00mm). This must be evaluated against available PCB clearance and enclosure dimensions to ensure mechanical fit.

Q: Are the capacitance and tolerance specifications identical?

A: Yes. Both parts are rated at 5600 µF with ±20% tolerance, ensuring equivalent electrical performance in circuit applications.

Q: What is the lead spacing and package compatibility?

A: Both parts use identical lead spacing (0.394" / 10.00mm) and radial snap-in package configuration, ensuring PCB footprint compatibility.