ECO-S1CP822AA Equivalent & Substitute Parts

Part Overview

The ECO-S1CP822AA is an 8200 µF, 16 V aluminum electrolytic capacitor in radial, can snap-in package manufactured by Panasonic Electronic Components. This component is classified as obsolete, making identification of equivalent substitute parts essential for ongoing system support and component procurement.

The part is designed for general purpose applications requiring high capacitance values in a compact through-hole format. Due to its obsolete status, sourcing direct replacements from active product lines is necessary to maintain supply chain continuity.

Substiute Parts

ECO-S1CP822AA

Panasonic Electronic ComponentsIn Stock: 851ECO-S1CP822AA Datasheet

Current PartRFQ

16MXG8200MEFCSN20X30

RubyconIn Stock: 95316MXG8200MEFCSN20X30 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ECO-S1CP822AA is based on the following critical parameters that must remain constant:

• Capacitance value: 8200 µF (exact match required)
• Voltage rating: 16 V (minimum requirement)
• Tolerance: ±20% (acceptable range for general purpose applications)
• Package configuration: Radial, Can - Snap-In (mechanical and electrical interface compatibility)
• Lead spacing: 0.394" (10.00mm) (PCB footprint compatibility)
• Physical dimensions: 0.787" diameter × 1.260" height (form factor and mounting clearance)
• Mounting type: Through Hole (assembly process compatibility)
• Polarization: Polar (electrical polarity requirement)

The Rubycon 16MXG8200MEFCSN20X30 meets all these substitution criteria while offering improved performance characteristics and active product status.

Parameter Comparison

Engineering Selection Recommendations

The Rubycon 16MXG8200MEFCSN20X30 is the direct equivalent substitute for the obsolete Panasonic ECO-S1CP822AA. Both components share identical electrical specifications (8200 µF, 16 V, ±20% tolerance) and mechanical form factors (radial snap-in package, 20mm diameter, 32mm height, 10mm lead spacing).

The Rubycon substitute offers the following advantages:

• Active product status ensures long-term availability and supply chain stability
• ROHS3 compliance meets current regulatory requirements
• Extended operating temperature range (-40°C ~ 105°C versus -40°C ~ 85°C)
• Improved lifetime rating (3000 Hrs @ 105°C versus 2000 Hrs @ 85°C)
• Direct PCB footprint compatibility with no layout modifications required

Selection of the Rubycon part is appropriate for new designs and replacement applications where the ECO-S1CP822AA is no longer available.

Frequently Asked Questions (FAQ)

Q: Can the Rubycon 16MXG8200MEFCSN20X30 be used as a direct replacement for the Panasonic ECO-S1CP822AA?

A: Yes. Both components have identical capacitance (8200 µF), voltage rating (16 V), tolerance (±20%), and physical dimensions. The snap-in package configuration, lead spacing (10mm), and through-hole mounting are identical, allowing direct PCB substitution without layout changes.

Q: What are the key parameters that determine substitution compatibility?

A: Substitution is based on matching capacitance value, voltage rating, tolerance, package type (radial snap-in), lead spacing, physical dimensions (diameter and height), and mounting method (through-hole). All these parameters are identical between the two parts.

Q: Does the Rubycon part have any compliance advantages?

A: Yes. The Rubycon 16MXG8200MEFCSN20X30 is ROHS3 compliant, whereas the Panasonic ECO-S1CP822AA is RoHS non-compliant. Both parts share the same ECCN (EAR99) and HTSUS classification (8532.22.0040).

Q: Are there any thermal or lifetime differences between these parts?

A: The Rubycon substitute operates across a wider temperature range (-40°C ~ 105°C versus -40°C ~ 85°C) and provides extended lifetime (3000 Hrs @ 105°C versus 2000 Hrs @ 85°C). These represent performance improvements over the original part.

Q: Will the Rubycon part fit the existing PCB without modifications?

A: Yes. The lead spacing (10mm), package diameter (20mm), and height (32mm) are identical. No PCB layout modifications are required for substitution.