ECE-T2GA182FA Equivalent & Substitute Parts

Part Overview

The ECE-T2GA182FA is a 1800 µF, 400 V aluminum electrolytic capacitor manufactured by Panasonic Electronic Components. This radial, can-style snap-in capacitor with 4 leads is designed for general-purpose applications requiring high capacitance and voltage ratings. The part is currently obsolete, making equivalent substitutes necessary for ongoing system maintenance and new designs requiring compatible specifications.

Substiute Parts

ECE-T2GA182FA

Panasonic Electronic ComponentsIn Stock: 1140ECE-T2GA182FA Datasheet

Current PartRFQ

383LX182M400N102

Cornell Dubilier Electronics (CDE)In Stock: 1006383LX182M400N102 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the ECE-T2GA182FA is determined by strict equivalence across the following critical parameters:

• Capacitance: 1800 µF (exact match required)
• Voltage Rating: 400 V (exact match required)
• Tolerance: ±20% (exact match required)
• Package Type: Radial, Can - Snap-In - 4 Lead (exact match required)
• Mounting Type: Through Hole (exact match required)
• Operating Temperature Range: -25°C ~ 105°C (minimum requirement)
• Lifetime @ Temperature: 3000 Hrs @ 105°C (minimum requirement)
• Polarization: Polar (exact match required)
• Physical Dimensions: 1.575" Dia (40.00mm) with compatible height (maximum 4.213")

The Cornell Dubilier Electronics (CDE) part 383LX182M400N102 meets all substitution criteria and is classified as an active product with current availability.

Parameter Comparison

Engineering Selection Recommendations

The 383LX182M400N102 from Cornell Dubilier Electronics is a direct functional equivalent to the obsolete ECE-T2GA182FA. Both parts share identical electrical specifications (1800 µF, 400 V, ±20% tolerance) and mechanical compatibility (radial snap-in package, through-hole mounting, 40mm diameter). The CDE substitute maintains the same operating temperature range and thermal lifetime rating.

The primary advantage of the CDE part is its active product status, ensuring current availability and supply chain continuity. The height difference of 2mm (107mm vs. 105mm maximum) is within typical PCB layout tolerances for through-hole snap-in capacitors and does not constitute a functional incompatibility.

Both parts carry identical export classifications (EAR99) and tariff codes (8532.22.0055), with the CDE part offering RoHS3 compliance. The MSL rating of 1 (Unlimited) for both parts indicates no moisture sensitivity constraints during storage or handling.

Frequently Asked Questions (FAQ)

Q: Can the 383LX182M400N102 be used as a direct replacement for the ECE-T2GA182FA?

A: Yes. Both parts are electrically and mechanically equivalent with identical capacitance (1800 µF), voltage rating (400 V), tolerance (±20%), package type (radial snap-in 4-lead), and thermal specifications (3000 Hrs @ 105°C). The 2mm height difference falls within standard PCB layout tolerances for this package style.

Q: What is the significance of the obsolete status of the ECE-T2GA182FA?

A: Obsolete status indicates the part is no longer manufactured by Panasonic. The CDE 383LX182M400N102 is an active product with current production and availability, making it the appropriate choice for new designs and ongoing system support.

Q: Are there any compliance differences between the two parts?

A: Both parts share identical ECCN (EAR99) and HTSUS (8532.22.0055) classifications. The CDE part includes RoHS3 compliance certification, while the Panasonic part is REACH Affected. Both maintain MSL 1 (Unlimited) moisture sensitivity ratings.

Q: Does the height difference of 2mm affect PCB compatibility?

A: No. The 2mm difference (107mm vs. 105mm maximum seated height) is within standard mechanical tolerances for radial snap-in capacitors and does not affect electrical performance or typical PCB layout requirements.

Q: What are the key parameters that determine substitution eligibility?

A: Substitution is determined by exact equivalence in capacitance (1800 µF), voltage rating (400 V), tolerance (±20%), package type (radial snap-in 4-lead), mounting method (through-hole), and minimum thermal specifications (3000 Hrs @ 105°C). Physical dimensions must be compatible with existing PCB footprints.