ECE-T2DP332FA Equivalent & Substitute Parts

Part Overview

The ECE-T2DP332FA is a 3300 µF, 200 V aluminum electrolytic capacitor manufactured by Panasonic Electronic Components. This radial, can-style snap-in capacitor with 4 leads is designed for general-purpose applications requiring high capacitance and voltage ratings. The part is classified as obsolete, making identification of functionally equivalent alternatives necessary for ongoing system support and component procurement.

Substiute Parts

ECE-T2DP332FA

Panasonic Electronic ComponentsIn Stock: 1110ECE-T2DP332FA Datasheet

Current PartRFQ

382LX332M200N062

Cornell Dubilier Electronics (CDE)In Stock: 1767382LX332M200N062 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ECE-T2DP332FA is determined by strict alignment of the following parameters:

• Capacitance value: 3300 µF (exact match required)
• Voltage rating: 200 V (exact match required)
• Tolerance: ±20% (exact match required)
• Package configuration: Radial, Can - Snap-In - 4 Lead (exact match required)
• Mounting type: Through Hole (exact match required)
• Operating temperature range: -40°C ~ 85°C (minimum requirement)
• Lifetime rating: 3000 Hrs @ 85°C (minimum requirement)
• Polarization: Polar (exact match required)

The substitute part 382LX332M200N062 from Cornell Dubilier Electronics meets all these criteria and qualifies as a direct functional equivalent.

Parameter Comparison

Engineering Selection Recommendations

The 382LX332M200N062 from Cornell Dubilier Electronics is a qualified direct substitute for the obsolete ECE-T2DP332FA. Both parts share identical electrical specifications (capacitance, voltage, tolerance, lifetime rating) and mechanical compatibility (package type, mounting configuration, primary dimensions).

The substitute part offers the advantage of active product status, ensuring continued availability and supply chain stability. The Cornell Dubilier part carries ROHS3 compliance and REACH unaffected status, providing regulatory advantages over the original Panasonic part.

Physical dimensions are compatible within standard PCB layout tolerances. The substitute height of 2.559" (65.00mm) versus the original 2.480" (63.00mm) represents a 2mm difference that does not impact standard through-hole mounting applications.

Frequently Asked Questions (FAQ)

Q: Can the 382LX332M200N062 be used as a direct replacement for ECE-T2DP332FA?

A: Yes. Both parts meet identical electrical and mechanical specifications: 3300 µF capacitance, 200 V voltage rating, ±20% tolerance, 3000 Hrs @ 85°C lifetime, and radial snap-in 4-lead package configuration. Physical dimensions are compatible with standard PCB layouts.

Q: What is the height difference between these parts?

A: The ECE-T2DP332FA has a maximum seated height of 2.480" (63.00mm), while the 382LX332M200N062 measures 2.559" (65.00mm). This 2mm difference does not affect standard through-hole mounting applications.

Q: Are there compliance differences between the two parts?

A: The substitute part (382LX332M200N062) is ROHS3 compliant and REACH unaffected, while the original part is REACH affected. For applications requiring specific regulatory compliance, the substitute provides enhanced certification status.

Q: What are the ripple current ratings for each part?

A: Both parts support 6.3 A ripple current at 120 Hz. At high frequency, the original part supports 8.848 A @ 10 kHz, while the substitute supports 8.9 A @ 20 kHz. These specifications are functionally equivalent for general-purpose applications.

Q: Is the original part still available?

A: The ECE-T2DP332FA is classified as obsolete. The 382LX332M200N062 is an active product with confirmed inventory availability, making it the recommended choice for new procurement and system support.