ECE-P2GP102HA Equivalent & Substitute Parts

Part Overview

The ECE-P2GP102HA is a 1000 µF, 400 V aluminum electrolytic capacitor manufactured by Panasonic Electronic Components in the T-UP series. This radial, snap-in configuration with 5 leads is designed for general-purpose applications requiring high capacitance and voltage ratings. The part is currently obsolete, making identification of suitable substitute components essential for ongoing system support, maintenance, and new production alternatives.

Substiute Parts

ECE-P2GP102HA

Panasonic Electronic ComponentsIn Stock: 844ECE-P2GP102HA Datasheet

Current PartRFQ

382LX122M400B052VS

Cornell Dubilier Electronics (CDE)In Stock: 1004382LX122M400B052VS Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the ECE-P2GP102HA is determined by the following critical parameters:

• Voltage Rating: Must be 400 V or higher to maintain system safety margins
• Capacitance: Acceptable range is 1000 µF nominal, with tolerance of ±20% allowing 800–1200 µF
• Package Configuration: Must be Radial, Can - Snap-In - 5 Lead to ensure mechanical and electrical compatibility
• Mounting Type: Through Hole mounting required for PCB integration
• Operating Temperature Range: Must support -25°C ~ 85°C minimum
• Lifetime Rating: 3000 Hrs @ 85°C or greater ensures equivalent reliability

The substitute part 382LX122M400B052VS from Cornell Dubilier Electronics meets all substitution criteria within the allowed parameter tolerance.

Parameter Comparison

Engineering Selection Recommendations

The 382LX122M400B052VS from Cornell Dubilier Electronics is a direct functional substitute for the obsolete ECE-P2GP102HA. Selection is supported by:

• Product Status: The substitute part is Active, ensuring long-term availability and supply chain continuity
• Compliance: Both parts carry ECCN EAR99 and HTSUS 8532.22.0055 classifications
• RoHS & REACH: The substitute is ROHS3 Compliant and REACH Unaffected, meeting current regulatory requirements
• Capacitance: The 1200 µF rating is within the ±20% tolerance band of the original 1000 µF specification
• Electrical Ratings: Voltage, temperature range, and lifetime specifications are equivalent

The primary design consideration is the 2 mm height difference (52.00 mm vs. 50.00 mm). Verify available PCB clearance in the mounting area before implementation.

Frequently Asked Questions (FAQ)

Q: Can the 382LX122M400B052VS replace the ECE-P2GP102HA in all applications?

A: Yes, within the constraints of physical clearance. The substitute meets all electrical and mechanical specifications. Verify that the additional 2 mm height does not interfere with adjacent components or enclosure geometry.

Q: Why is the substitute capacitance 1200 µF instead of 1000 µF?

A: The 1200 µF rating falls within the ±20% tolerance specification of the original part (800–1200 µF range). This higher capacitance provides equivalent or improved performance in general-purpose applications.

Q: Are the snap-in lead configurations identical?

A: Both parts use Radial, Can - Snap-In - 5 Lead configuration. Physical lead spacing and PCB footprint compatibility should be confirmed during design validation.

Q: What is the impact of the height difference on PCB layout?

A: The substitute is 2 mm taller (52.00 mm vs. 50.00 mm). Ensure adequate clearance above the component for enclosure fit and no interference with other mounted components.

Q: Are there any compliance or certification differences?

A: Both parts share identical ECCN and HTSUS classifications. The substitute is ROHS3 Compliant and REACH Unaffected, meeting current regulatory standards.

Q: What is the inventory status for these parts?

A: ECE-P2GP102HA: 785 Pcs in stock (obsolete status). 382LX122M400B052VS: 940 Pcs in stock (active status). The substitute offers superior long-term availability.