ECE-P1KA223HA Equivalent & Substitute Parts

Part Overview

The ECE-P1KA223HA is a 22000 µF, 80 V aluminum electrolytic capacitor manufactured by Panasonic Electronic Components in the T-HA series. This radial, can-style snap-in capacitor with 5 leads is designed for general purpose applications requiring high capacitance and voltage ratings. The part is currently obsolete, making equivalent substitutes necessary for ongoing system support and component procurement.

Substiute Parts

ECE-P1KA223HA

Panasonic Electronic ComponentsIn Stock: 1119ECE-P1KA223HA Datasheet

Current PartRFQ

383LX223M080B092VS

Cornell Dubilier Electronics (CDE)In Stock: 1430383LX223M080B092VS Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ECE-P1KA223HA is determined by strict equivalence across the following critical parameters:

• Capacitance: 22000 µF (exact match required)
• Voltage Rating: 80 V (exact match required)
• Tolerance: ±20% (exact match required)
• ESR: 22 mOhm (exact match required)
• Lifetime: 3000 Hrs @ 105°C (exact match required)
• Operating Temperature: -40°C ~ 105°C (exact match required)
• Package / Case: Radial, Can - Snap-In - 5 Lead (exact match required)
• Mounting Type: Through Hole (exact match required)
• Physical Dimensions: 1.969" Dia (50.00 mm) and compatible height (maximum 3.701")
• Polarization: Polar (exact match required)

The 383LX223M080B092VS from Cornell Dubilier Electronics (CDE) meets all substitution criteria and is classified as an active product with current availability.

Parameter Comparison

Engineering Selection Recommendations

The 383LX223M080B092VS from Cornell Dubilier Electronics is a direct functional equivalent to the obsolete ECE-P1KA223HA. Selection of this substitute is based on:

• Exact electrical parameter equivalence across all critical specifications
• Active product status with confirmed current inventory availability
• Compliance certifications: RoHS3 Compliant, REACH Unaffected
• Identical package and mounting configuration ensuring mechanical compatibility
• Marginal height increase (94.00 mm vs. 92.00 mm) remains within typical PCB layout tolerances for through-hole snap-in capacitors

The substitute part is suitable for direct replacement in applications previously specified for the ECE-P1KA223HA.

Frequently Asked Questions (FAQ)

Q: Can the 383LX223M080B092VS be used as a direct replacement for the ECE-P1KA223HA?

A: Yes. Both parts share identical electrical specifications (22000 µF, 80 V, ±20% tolerance, 22 mOhm ESR, 3000 Hrs @ 105°C), identical package configuration (Radial, Can - Snap-In - 5 Lead), and compatible physical dimensions. The substitute is an active product with current availability.

Q: What is the significance of the height difference between the two parts?

A: The ECE-P1KA223HA has a maximum seated height of 3.622" (92.00 mm), while the 383LX223M080B092VS measures 3.701" (94.00 mm). This 2 mm difference is typical for through-hole snap-in capacitors and does not affect electrical performance or standard PCB layout compatibility.

Q: Are there any compliance or certification differences?

A: The 383LX223M080B092VS carries RoHS3 Compliance and REACH Unaffected certifications. Both parts share the same ECCN (EAR99) and HTSUS (8532.22.0055) classifications.

Q: What is the ripple current specification difference at high frequency?

A: The ECE-P1KA223HA specifies 9.005 A @ 10 kHz, while the 383LX223M080B092VS specifies 9 A @ 20 kHz. Both values are equivalent for general purpose applications and meet the electrical requirements of the original specification.

Q: Is the lead spacing identical between the two parts?

A: Lead spacing is not specified for the 383LX223M080B092VS in the provided data. However, both parts use the identical Radial, Can - Snap-In - 5 Lead package configuration, ensuring mechanical compatibility in standard through-hole applications.