ECE-P1HP563HA Equivalent & Substitute Parts

Part Overview

The ECE-P1HP563HA is a 56000 µF, 50 V aluminum electrolytic capacitor manufactured by Panasonic Electronic Components in the T-UP series. This radial, can-style snap-in capacitor with 5 leads is designed for general purpose applications requiring high capacitance at moderate voltage ratings. The part is currently obsolete, making equivalent substitutes necessary for ongoing system support and component procurement.

Substiute Parts

ECE-P1HP563HA

Panasonic Electronic ComponentsIn Stock: 822ECE-P1HP563HA Datasheet

Current PartRFQ

382LX563M050B082V

Cornell Dubilier Electronics (CDE)In Stock: 1141382LX563M050B082V Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the ECE-P1HP563HA is determined by strict equivalence across the following critical parameters:

• Capacitance value: 56000 µF (exact match required)
• Voltage rating: 50 V (exact match required)
• Tolerance: ±20% (exact match required)
• Operating temperature range: -40°C ~ 85°C (exact match required)
• Lifetime specification: 3000 Hrs @ 85°C (exact match required)
• Package type: Radial, Can - Snap-In - 5 Lead (exact match required)
• Mounting: Through Hole (exact match required)
• Polarization: Polar (exact match required)
• Ripple current ratings @ 120 Hz: 12.46 A (exact match required)

The Cornell Dubilier Electronics (CDE) 382LX563M050B082V meets all critical substitution criteria and is classified as an equivalent part.

Parameter Comparison

Engineering Selection Recommendations

The 382LX563M050B082V from Cornell Dubilier Electronics is a direct equivalent substitute for the obsolete ECE-P1HP563HA. Both parts share identical electrical specifications for capacitance, voltage rating, tolerance, operating temperature range, and lifetime rating. The CDE part offers the advantage of active product status, ensuring continued availability and supply chain reliability.

The 382LX563M050B082V carries ROHS3 compliance and REACH unaffected status, meeting modern regulatory requirements. The physical dimensions are nearly identical, with a maximum height difference of 0.078" (2.00 mm), which is within typical PCB layout tolerances for through-hole snap-in capacitors.

Frequently Asked Questions (FAQ)

Q: Can the 382LX563M050B082V be used as a direct replacement for the ECE-P1HP563HA?

A: Yes. Both parts meet identical electrical specifications: 56000 µF capacitance, 50 V voltage rating, ±20% tolerance, -40°C to 85°C operating range, and 3000 hour lifetime at 85°C. The package type, mounting method, and ripple current ratings are equivalent.

Q: What is the significance of the height difference between these parts?

A: The ECE-P1HP563HA has a maximum seated height of 3.150" (80.00 mm), while the 382LX563M050B082V measures 3.228" (82.00 mm). This 0.078" (2.00 mm) difference is typical among equivalent snap-in capacitors and should not affect PCB layout in most applications. Verify clearance in your specific design.

Q: Why is the ECE-P1HP563HA obsolete?

A: Panasonic has discontinued the T-UP series. The 382LX563M050B082V from Cornell Dubilier Electronics remains in active production and provides functional equivalence for replacement and new designs.

Q: Are there compliance differences between these parts?

A: The 382LX563M050B082V carries ROHS3 compliance and REACH unaffected status. The ECE-P1HP563HA compliance information is not specified in available documentation. For applications requiring specific regulatory compliance, the CDE part meets current environmental standards.

Q: What should I verify before substitution?

A: Confirm that the 2.00 mm height difference does not conflict with your PCB layout and component clearances. Verify that the snap-in lead configuration matches your PCB footprint. Both parts are polar capacitors; ensure correct polarity orientation in your circuit.