EC4AB01M Equivalent & Substitute Parts Reference

Part Overview

The Cincon EC4AB01M is an isolated DC DC converter module providing a single 5V output at up to 1A from a 9V to 18V input range. It is supplied in a through-hole 24-DIP Module package, measures 1.25" x 0.80" x 0.50" (31.8mm x 20.3mm x 12.7mm), and is RoHS3 compliant, with a product status of Active. Alternate models with identical parametric specifications are sometimes necessary to address supply challenges, multi-sourcing requirements, or approved vendor list management.

Substiute Parts

EC4AB01M

Cincon Electronics Co. LTDIn Stock: 827EC4AB01M Datasheet

Current PartRFQ

EC4AB01

Cincon Electronics Co. LTDIn Stock: 781EC4AB01 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts are identified based on a strict match of all key parametric values: output voltage, output current, input voltage range, power rating, isolation voltage, package, mounting type, efficiency, operating temperature range, regulatory compliance, and product status. Parametric equivalence is required for proper substitution within the specific category of isolated module DC DC converters.

Key grouping parameters:

• Output voltage: 5V
• Output current: 1A
• Input voltage range: 9V - 18V
• Power rating: 5 W
• Voltage isolation: 500 V
• Package and mounting: 24-DIP Module, Through Hole
• Efficiency: 76%
• Operating temperature: -25°C ~ 71°C
• RoHS, REACH status
• Product Status: Active

Parameter Comparison

Engineering Selection Recommendations

Both Cincon EC4AB01M and EC4AB01 isolated DC DC converter modules are listed with identical Active product status, ROHS3 compliance, and REACH status unaffected. As a result, either component can be selected wherever regulatory, environmental, and lifecycle management controls require full compliance and active sourcing.

Frequently Asked Questions (FAQ)

Q1: What parameters require exact matching to consider EC4AB01 as a substitute for EC4AB01M?
A1: Key parameters include input voltage range (9V to 18V), output voltage (5V), output current (1A), power rating (5W), voltage isolation (500V), package (24-DIP Module, 14 Leads), mounting type (Through Hole), efficiency (76%), operating temperature (-25°C ~ 71°C), and regulatory compliance status (RoHS3, REACH).

Q2: Are EC4AB01M and EC4AB01 interchangeable in a PCB layout?
A2: Both parts share the same 24-DIP Module, 14 Leads package dimensions and mounting type (Through Hole), allowing interchangability in footprints and assembly.

Q3: Does the substitute part comply with the same environmental and safety regulations?
A3: EC4AB01 matches EC4AB01M in RoHS3 compliance, REACH unaffected status, and moisture sensitivity level.

Q4: Are there any differences in electrical or mechanical parameters between EC4AB01M and EC4AB01?
A4: No differences are present in the listed parameters between EC4AB01M and EC4AB01.

Q5: Is additional qualification required to use the substitute in place of the main part?
A5: No additional qualification is indicated when parts are strictly matched across all provided parameters for this product category.

Q6: What package and mounting considerations apply for these substitutes?
A6: Both devices are supplied in a 24-DIP Module, 14 Leads package with Through Hole mounting, supporting direct substitution in compatible hardware designs.