Equivalent & Substitute Parts for EC4A05M

Part Overview

The EC4A05M from Cincon Electronics Co. LTD is an isolated module DC-DC converter featuring two outputs of +15V and -15V at 190mA each, with a maximum output power of 5.7 W and input voltage range of 9V to 18V. This device is RoHS3 compliant, designed for ITE (Commercial) applications, and offers through-hole mounting in a 24-DIP, 14-lead package. The product is active with significant inventory. Identifying alternative models is necessary for ensuring supply chain flexibility, design decision confidence, and lifecycle management where form, fit, and functional compatibility are required.

Substiute Parts

EC4A05M

Cincon Electronics Co. LTDIn Stock: 1001EC4A05M Datasheet

Current PartRFQ

EC4A05

Cincon Electronics Co. LTDIn Stock: 917EC4A05 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts are determined strictly based on matching all electrical, mechanical, and compliance parameters provided. Critical criteria include:

• Voltage – Input minimum and maximum values
• Voltage – Output values and count of outputs
• Output current ratings
• Output power specification
• Isolation voltage
• Mounting type and package/case dimensions
• RoHS and REACH compliance
• Product status (active)

Only parts matching these explicit parameters without deviation are considered equivalent or substitutable.

Parameter Comparison

Engineering Selection Recommendations

Selection among EC4A05M and EC4A05 is supported by identical product status (active), equal compliance with ROHS3 and REACH standards, and matching technical characteristics. Both parts have an unlimited moisture sensitivity level (MSL 1), maintaining consistent handling and storage requirements. Differences in regulatory status or end-of-life risk are not present in this equivalency set.

Frequently Asked Questions (FAQ)

Q1: What are the main parameters to check when selecting an equivalent or substitute for EC4A05M?
A1: Ensure identical input voltage range, output voltages, output currents, maximum power, mounting type, package/case, isolation voltage, compliance (RoHS/REACH), and active product status.

Q2: What package considerations are important for EC4A05M substitution?
A2: The substitute must use the 24-DIP Module, 14 Leads through-hole package with matching dimensions: 1.25" L x 0.80" W x 0.40" H (31.8mm x 20.3mm x 10.2mm).

Q3: Is the EC4A05M pin-for-pin compatible with the EC4A05?
A3: All provided parameters indicate equivalence in pin configuration and footprint, with both using "24-DIP Module, 14 Leads" and through-hole mounting.

Q4: Are there differences in lifecycle status affecting substitute selection?
A4: Both EC4A05M and EC4A05 are listed as "Active."

Q5: Are both EC4A05M and EC4A05 suitable for commercial ITE applications with RoHS and REACH compliance requirements?
A5: Yes, both parts are specified as RoHS3 compliant and REACH unaffected.