Equivalent & Substitute Parts Reference for EC3B01 (Cincon Electronics Co. LTD)

Part Overview

The EC3B01 by Cincon Electronics Co. LTD is a DC DC Converter categorized as an Isolated Module DC DC Converter, providing a single regulated 5V output at a maximum current of 1.5A, rated for 7.5W output power. With an input voltage range of 9V to 18V, this module is intended for ITE (Commercial) applications and features 1.5 kV isolation and SCP (short circuit protection). The EC3B01 is listed as Obsolete, necessitating identification of alternative models to maintain system compatibility and continuity where this model is specified or has been previously designed-in.

Substiute Parts

EC3B01

Cincon Electronics Co. LTDIn Stock: 916EC3B01 Datasheet

Current PartRFQ

EC6A01

Cincon Electronics Co. LTDIn Stock: 1171EC6A01 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution is determined strictly by matching the following key electrical and mechanical parameters: Manufacturer, Type, Number of Outputs, Input Voltage Range, Output Voltage, Output Current, Output Power, Isolation Voltage, Features, Mounting Type, RoHS and REACH Compliance, and Moisture Sensitivity Level. Package/case and operating temperature are referenced directly as provided, without extrapolation or modification. As the EC3B01 is Obsolete, only substitute models sharing these parameters can be considered for direct replacement in design or maintenance situations.

Parameter Comparison

Engineering Selection Recommendations

The EC3B01 is Obsolete. The EC6A01 is available as an Active part and matches all mandatory key electrical parameters, as well as compliance requirements including ROHS3 and REACH unaffected status. The substitute EC6A01 has additional certifications (CE, cURus, 60950-1) and a broader operating temperature range. Both parts are classified under the same ECCN and HTSUS codes and have identical Moisture Sensitivity Levels and mounting types.

Frequently Asked Questions (FAQ)

Q: What electrical parameters must be matched when substituting EC3B01 in an application?
A: The substitute must match the input voltage range, output voltage, maximum output current, output power, isolation voltage, and regulation type (Isolated Module, SCP features).

Q: Are there any differences in package or size that may affect physical compatibility?
A: EC3B01 uses a 5-DIP Module package (2.00" L x 1.00" W x 0.40" H); EC6A01 uses a 24-DIP Module, 14 Leads package (1.25" L x 0.80" W x 0.40" H). Mechanical compatibility must be considered if installing into a mating socket or PCB.

Q: Is compliance status affected for substitute parts?
A: Both EC3B01 and EC6A01 are ROHS3 Compliant and REACH Unaffected. ECCN and HTSUS codes are unchanged.

Q: Will the substitute part perform differently under extended temperature ranges?
A: EC6A01 specifies a wider operating temperature (-40°C ~ 100°C with derating) as compared to EC3B01 (-25°C ~ 71°C).

Q: What about approval agency certifications?
A: EC6A01 lists CE, cURus, and 60950-1 certifications; EC3B01 does not list specific approval agencies in the provided parameters.

Q: Can the substitute EC6A01 be directly drop-in replaced in all EC3B01 application locations?
A: All strictly specified electrical characteristics are matched. Physical package and pinout details must be referenced for direct replacement based on mechanical fit.