EC103D1 Equivalent & Substitute Parts

Part Overview

The EC103D1 is a 400V 800mA sensitive gate silicon controlled rectifier (SCR) manufactured by Littelfuse Inc. in TO-92 through-hole packaging. This component is classified as Active product status with full RoHS3 compliance and REACH unaffected designation. Substitute parts are identified when equivalent electrical performance and mechanical compatibility are required due to inventory constraints, manufacturing discontinuation, or supply chain optimization.

Key Parameters

Parameter	EC103D1 (Littelfuse)
Voltage - Off State	400 V
Voltage - Gate Trigger (Vgt) Max	800 mV
Current - Gate Trigger (Igt) Max	12 µA
Voltage - On State (Vtm) Max	1.7 V
Current - On State (It RMS) Max	800 mA
Current - Hold (Ih) Max	5 mA
SCR Type	Sensitive Gate
Operating Temperature Range	-40°C to 110°C
Package / Case	TO-226-3, TO-92-3
Mounting Type	Through Hole
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution eligibility for the EC103D1 is determined by the following critical parameters:

Voltage Rating (Off State): 400V minimum requirement
Gate Trigger Voltage (Vgt): 800 mV maximum specification
RMS Current Rating: 800 mA minimum capability
SCR Type: Sensitive Gate classification
Package Compatibility: TO-92-3 through-hole form factor
Compliance: RoHS3 and REACH status alignment

The identified substitute parts (P0102DA 1AA3, P0102DA 5AL3, P0109DA 5AL3, and XL0840) meet these core electrical and mechanical requirements. Variations in gate trigger current (Igt), on-state voltage (Vtm), and operating temperature range do not disqualify substitution when the primary functional parameters remain within acceptable tolerance.

Parameter Comparison

Parameter	EC103D1 (Littelfuse)	P0102DA 1AA3 (STMicroelectronics)	P0102DA 5AL3 (STMicroelectronics)	P0109DA 5AL3 (STMicroelectronics)	XL0840 (STMicroelectronics)
Voltage - Off State	400 V	400 V	400 V	400 V	400 V
Voltage - Gate Trigger (Vgt) Max	800 mV	800 mV	800 mV	800 mV	800 mV
Current - Gate Trigger (Igt) Max	12 µA	200 µA	200 µA	200 µA	200 µA
Voltage - On State (Vtm) Max	1.7 V	1.95 V	1.95 V	1.95 V	1.95 V
Current - On State (It RMS) Max	800 mA	800 mA	800 mA	800 mA	800 mA
Current - Hold (Ih) Max	5 mA	5 mA	5 mA	5 mA	5 mA
Operating Temperature Range	-40°C to 110°C	-40°C to 125°C	-40°C to 125°C	-40°C to 125°C	-40°C to 125°C
Package / Case	TO-226-3, TO-92-3	TO-226-3, TO-92-3	TO-226-3, TO-92-3	TO-226-3, TO-92-3	TO-226-3, TO-92-3
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Product Status	Active	Active	Active	Active	Last Time Buy

Engineering Selection Recommendations

All identified substitute parts maintain Active product status except XL0840, which carries Last Time Buy designation. For new designs or long-term production requirements, P0102DA 1AA3 (Bulk packaging) or P0102DA 5AL3 (Cut Tape packaging) are preferred selections due to sustained manufacturing availability and extended operating temperature range (-40°C to 125°C versus -40°C to 110°C for the EC103D1).

P0109DA 5AL3 provides functional equivalence with identical electrical specifications to P0102DA variants and remains in active production. XL0840 is suitable for existing inventory management or legacy system support but should not be selected for new applications requiring long-term component availability.

All substitute parts maintain ROHS3 compliance and REACH unaffected status, ensuring regulatory alignment with the original EC103D1 specification.

Frequently Asked Questions (FAQ)

Q: Can P0102DA 1AA3 directly replace EC103D1 in existing PCB assemblies?

A: Yes. Both components share identical TO-92-3 through-hole package geometry, pin configuration, and core electrical ratings (400V off-state voltage, 800mA RMS current, 800mV gate trigger voltage). PCB layout and lead spacing are compatible without modification.

Q: What is the difference between P0102DA 5AL3 and P0102DA 1AA3?

A: Both parts are electrically identical. The difference is packaging format: P0102DA 5AL3 is supplied in Cut Tape (CT) format with formed leads, while P0102DA 1AA3 is supplied in Bulk format. Selection depends on assembly process requirements and tape-and-reel compatibility.

Q: Why does XL0840 show Last Time Buy status?

A: Last Time Buy designation indicates the manufacturer has announced end-of-life production. XL0840 remains functionally equivalent but should not be selected for new designs requiring sustained component availability beyond current inventory levels.

Q: Are there electrical performance differences between EC103D1 and STMicroelectronics substitutes?

A: Gate trigger current (Igt) specification differs: EC103D1 maximum is 12 µA while all STMicroelectronics substitutes specify 200 µA maximum. On-state voltage (Vtm) is also higher in substitutes (1.95V versus 1.7V). These differences do not affect substitution eligibility when circuit design accommodates the specified tolerances.

Q: Is the extended operating temperature range of substitute parts (-40°C to 125°C) a benefit?

A: The extended upper temperature limit (125°C versus 110°C) provides additional thermal margin in applications approaching maximum rated junction temperature. This is a functional advantage for high-temperature environments but not required for applications within the EC103D1 temperature specification.

Q: Do all substitute parts maintain the same moisture sensitivity level?

A: Yes. EC103D1 and all identified substitutes carry MSL 1 (Unlimited) designation, indicating no moisture sensitivity restrictions for storage or handling.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message