EBG.3P.306.PLW Equivalent & Substitute Parts

Part Overview

The EBG.3P.306.PLW is a 7-position circular connector receptacle manufactured by LEMO, featuring female sockets with solder cup termination. This connector is designed for panel mount applications with push-pull detent lock fastening and keyed orientation. The part is currently classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing system support and component procurement.

Substiute Parts

EBG.3P.306.PLW

LEMOIn Stock: 784EBG.3P.306.PLW Datasheet

Current PartRFQ

EBG.3P.306.PLWG

LEMOIn Stock: 1047EBG.3P.306.PLWG Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the EBG.3P.306.PLW is determined by strict equivalence across the following critical parameters:

• Connector type: Receptacle with female sockets
• Position count: 7 positions (6 + PE ground)
• Shell size: 306 insert
• Mounting configuration: Panel mount with flange
• Termination method: Solder cup
• Fastening mechanism: Push-pull with detent lock
• Keyed orientation
• Shell material: Polysulfone (PSU)
• Contact finish: Gold plating on mating surfaces
• Ingress protection: IP61 rating
• Current capacity: 6A
• Temperature range: -50°C to 150°C
• Insert material: Polyetheretherketone (PEEK)
• Regulatory compliance: ROHS3 and REACH requirements

The substitute part EBG.3P.306.PLWG maintains identical electrical and mechanical specifications across all these parameters, with the primary distinction being product status and packaging configuration.

Parameter Comparison

Engineering Selection Recommendations

The EBG.3P.306.PLWG is the direct functional equivalent for the obsolete EBG.3P.306.PLW. Both connectors are manufactured by LEMO within the 3P series and maintain identical electrical and mechanical specifications. The substitute part is currently in active production status, ensuring long-term availability and supply chain continuity.

Both parts satisfy ROHS3 compliance and REACH regulatory requirements, making them suitable for applications subject to these standards. The MSL rating of 1 (Unlimited) indicates no moisture sensitivity constraints during storage or handling.

The primary distinction between the two parts is packaging configuration: the substitute is supplied in bulk packaging rather than standard packaging. This difference does not affect connector performance, compatibility, or electrical characteristics.

Frequently Asked Questions (FAQ)

Q: Can EBG.3P.306.PLWG be used as a direct replacement for EBG.3P.306.PLW?

A: Yes. Both connectors are electrically and mechanically identical across all specified parameters. The substitute part maintains the same 7-position configuration, solder cup termination, gold contact finish, and operating specifications.

Q: What is the difference between the two part numbers?

A: The primary difference is product status and packaging. EBG.3P.306.PLW is obsolete, while EBG.3P.306.PLWG is in active production. The substitute is supplied in bulk packaging.

Q: Are there any compatibility concerns when substituting these parts?

A: No compatibility concerns exist. Both connectors feature identical shell size (306), mounting configuration (panel mount with flange), fastening mechanism (push-pull detent lock), and keyed orientation. Solder cup termination and contact geometry are equivalent.

Q: Do both parts meet the same regulatory standards?

A: Yes. Both EBG.3P.306.PLW and EBG.3P.306.PLWG are ROHS3 compliant and REACH unaffected. Both carry MSL rating 1 (Unlimited).

Q: What is the current rating for these connectors?

A: Both connectors are rated for 6A continuous current.

Q: What temperature range do these connectors support?

A: Both connectors operate across the range of -50°C to 150°C.

Q: What is the ingress protection rating?

A: Both connectors provide IP61 protection, classified as dust tight.