EB2011-BE Equivalent & Substitute Parts

Part Overview

The EB2011-BE is an SPDT pushbutton switch manufactured by NKK Switches, rated for 3A at 125V AC with panel mount rear configuration. This component is designed for standard switching applications requiring momentary on-off functionality with solder lug termination. The part maintains Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are identified to provide equivalent electrical and mechanical performance for applications where the original part is unavailable or inventory constraints require alternative sourcing.

Substiute Parts

EB2011-BE

NKK SwitchesIn Stock: 1020EB2011-BE Datasheet

Current PartRFQ

MPS-103F

TE Connectivity ALCOSWITCH SwitchesIn Stock: 1041MPS-103F Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The MPS-103F from TE Connectivity ALCOSWITCH Switches qualifies as a direct substitute based on the following critical parameters:

• Circuit Configuration: Both parts feature SPDT topology, enabling identical switching logic
• Electrical Ratings: Matching 3A AC and 125V AC specifications ensure equivalent load handling capacity
• Switch Function: Both implement On-Mom (momentary) operation for identical user interaction
• Mounting Configuration: Panel Mount, Rear mounting type maintains mechanical compatibility
• Termination: Solder Lug termination allows direct PCB integration without adapter requirements
• Electrical Life: Both rated for 25,000 cycles, providing equivalent operational durability
• Compliance: Both achieve ROHS3 compliance and MSL 1 rating, meeting environmental and reliability standards

Parameter Comparison

Engineering Selection Recommendations

Both the EB2011-BE and MPS-103F are Active status products with full ROHS3 compliance and EAR99 export classification. Selection between these parts should be based on:

• Inventory Availability: Choose based on stock status and lead time requirements
• Operating Temperature Range: The MPS-103F provides extended temperature operation (-20°C to 80°C) compared to the EB2011-BE (-10°C to 70°C). Select MPS-103F for applications requiring operation below -10°C or above 70°C
• Mechanical Life Specification: The EB2011-BE specifies 100,000 mechanical cycles; the MPS-103F does not provide this specification. For high-cycle mechanical durability requirements, verify MPS-103F performance with the manufacturer
• Actuator Characteristics: The EB2011-BE features a round button actuator with yellow color; the MPS-103F uses a plunger-type actuator. Verify panel cutout compatibility and user interface requirements before substitution
• Regulatory Compliance: Both parts meet identical compliance requirements (ROHS3, MSL 1, EAR99)

Frequently Asked Questions (FAQ)

Q: Can MPS-103F directly replace EB2011-BE in existing designs?

A: Direct electrical substitution is valid based on matching SPDT circuit, 3A/125V ratings, momentary function, and solder lug termination. Physical panel cutout compatibility must be verified, as the EB2011-BE specifies circular 6.35mm diameter cutout while MPS-103F panel cutout dimensions are not provided.

Q: What are the key differences between these parts?

A: Operating temperature range differs (EB2011-BE: -10°C to 70°C; MPS-103F: -20°C to 80°C). Mechanical life specification is provided for EB2011-BE (100,000 cycles) but not for MPS-103F. Actuator type differs (round button vs. plunger). All other electrical and compliance parameters are equivalent.

Q: Are both parts RoHS compliant?

A: Yes, both EB2011-BE and MPS-103F are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating.

Q: What is the electrical life rating for both parts?

A: Both parts are rated for 25,000 electrical cycles, providing equivalent operational durability for switching applications.

Q: Do these parts require any special handling or storage?

A: Both parts carry MSL 1 rating, indicating unlimited shelf life without moisture sensitivity constraints. Standard component storage practices apply.