EAC309XASP

Part Overview

The EAC309XASP is an AC power connector manufactured by Switchcraft Inc., classified as a power entry connector. The product is obsolete, necessitating identification of active substitute components to maintain system compatibility and ensure continued component availability for repair, maintenance, and new installations.

Substiute Parts

EAC309XASP

Switchcraft Inc.In Stock: 1182EAC309XASP Datasheet

Current PartRFQ

703W-00/02

QualtekIn Stock: 1203703W-00/02 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The EAC309XASP is substituted by the 703W-00/02 from Qualtek. This substitution is valid based on the following electrical and mechanical parameters:

Key Substitution Parameters:

• Connector Category: AC Power Connectors
• Connector Standard: IEC 320-C14 interface compatibility
• Connector Type: Receptacle with Male Blades
• Current Rating: 10A appliance inlet rating
• Voltage Rating: 250VAC appliance inlet rating
• Number of Positions: 3 positions
• Mounting Configuration: Panel Mount with Flange
• Termination Method: Solder Eyelet

The 703W-00/02 satisfies all functional requirements for power entry applications requiring IEC 320-C14 receptacle configurations with the specified electrical ratings.

Parameter Comparison

Engineering Selection Recommendations

The 703W-00/02 serves as the primary substitute for the obsolete EAC309XASP. Selection of this substitute component is supported by the following factors:

Product Status: The 703W-00/02 maintains Active product status, ensuring ongoing availability and manufacturability.

Regulatory Compliance: The 703W-00/02 holds certifications from CSA, UL, and VDE, meeting international safety standards applicable to power entry connectors. RoHS3 compliance and REACH unaffected status confirm environmental regulatory alignment.

Export Classification: The EAR99 ECCN designation permits standard commercial distribution channels.

The substitute component maintains functional equivalence through identical connector standards, current and voltage ratings, position count, mounting configuration, and termination methods.

Frequently Asked Questions (FAQ)

Q: Why is the EAC309XASP no longer available? A: The EAC309XASP has reached obsolete product status. The 703W-00/02 provides equivalent functionality for new designs and replacement applications.

Q: What electrical parameters must match for substitution? A: Critical matching parameters include the IEC 320-C14 connector standard, 10A current rating, 250VAC voltage rating, 3-position configuration, and receptacle male blades connector type.

Q: Are mounting requirements identical between the parts? A: Yes. Both components use panel mount configurations with flange mounting, accommodating the same panel cutout dimensions (Rectangular - 30.50mm x 22.50mm) and solder eyelet termination.

Q: What certifications does the substitute carry? A: The 703W-00/02 holds CSA, UL, and VDE approvals, with ROHS3 compliance and REACH unaffected status.

Q: Are there packaging considerations for the substitute? A: The 703W-00/02 is supplied in Bulk packaging, with 1105 pieces available in new original stock.