Omron E52-P75C D=6.4 RTD Temperature Sensor – Equivalent & Substitute Parts

Part Overview

The Omron E52-P75C D=6.4 is a Pt100 RTD temperature sensor designed for industrial temperature measurement applications across a range of -200°C to 450°C. This sensor features a 3-conductor system with enclosed terminals and a 750mm protective tube with 6.4mm diameter. The part is currently listed as obsolete, making identification of suitable substitute components essential for system maintenance, repair, and new installations where equivalent functionality is required.

Substiute Parts

E52-P75C D=6.4

Omron Automation and SafetyIn Stock: 840E52-P75C D=6.4 Datasheet

Current PartRFQ

E52-P75C-N D=6.4

Omron Automation and SafetyIn Stock: 1012E52-P75C-N D=6.4 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the E52-P75C D=6.4 is determined by strict equivalence across the following critical parameters:

• Element Type: Pt100 RTD sensor element
• Temperature Range: -200°C to 450°C operational capability
• Conductor Configuration: 3-conductor system for accurate temperature measurement
• Terminal Configuration: Enclosed terminals for environmental protection
• Protective Tube Dimensions: 750mm length and 6.4mm diameter for mechanical fit and thermal response
• Manufacturer Consistency: Omron Automation and Safety components maintain design and performance standards

The substitute part E52-P75C-N D=6.4 meets all these criteria and is classified as an active product, providing a direct functional equivalent with current manufacturing support.

Parameter Comparison

Engineering Selection Recommendations

The E52-P75C-N D=6.4 is the appropriate substitute for the obsolete E52-P75C D=6.4. Both components share identical electrical and mechanical specifications, including Pt100 element type, temperature range, conductor configuration, and protective tube dimensions. The substitute part maintains active product status with current manufacturing availability, ensuring supply chain continuity and consistent performance characteristics.

The transition from the obsolete part to the active substitute involves no functional compromise. Both components comply with REACH regulations and carry identical MSL ratings. The substitute is available in bulk packaging, supporting both individual replacement and production-scale applications.

Frequently Asked Questions (FAQ)

Q: Can the E52-P75C-N D=6.4 be used as a direct replacement for the E52-P75C D=6.4?

A: Yes. Both components are Pt100 RTD sensors with identical temperature ranges (-200°C to 450°C), 3-conductor systems, enclosed terminals, and 750mm × 6.4mm protective tube dimensions. The substitute is functionally equivalent and mechanically compatible.

Q: What is the primary difference between these two part numbers?

A: The E52-P75C D=6.4 is obsolete, while the E52-P75C-N D=6.4 is an active product. The "-N" designation and active status indicate current manufacturing support and availability. All electrical and mechanical parameters remain identical.

Q: Are there packaging differences between the main part and substitute?

A: The main part packaging is not specified in available documentation. The substitute is supplied in bulk packaging, which is standard for active production components and supports flexible procurement quantities.

Q: Do both parts meet the same compliance standards?

A: Yes. Both the E52-P75C D=6.4 and E52-P75C-N D=6.4 are REACH unaffected, carry ECCN classification EAR99, and maintain MSL rating 1 (Unlimited). Compliance profiles are equivalent.

Q: What are the critical parameters for confirming substitution compatibility?

A: Verify that your application requires a Pt100 RTD sensor with -200°C to 450°C temperature range, 3-conductor configuration, enclosed terminals, and 750mm protective tube with 6.4mm diameter. If all parameters match, the E52-P75C-N D=6.4 is a confirmed substitute.