Equivalent & Substitute Parts for E2E-X5MF2

Part Overview

The E2E-X5MF2 is an inductive proximity sensor manufactured by Omron Automation and Safety, designed for non-contact detection applications with a 5mm sensing distance. This sensor features PNP-NC output configuration, operates across a wide voltage range of 10V to 40V, and is housed in a cylindrical M12 threaded package with IP67 ingress protection. The product is currently classified as obsolete, making identification of suitable substitute components essential for system maintenance and new design implementations.

Substiute Parts

E2E-X5MF2

Omron Automation and SafetyIn Stock: 1130E2E-X5MF2 Datasheet

Current PartRFQ

E2E-X5MB212 2M

Omron Automation and SafetyIn Stock: 1110E2E-X5MB212 2M Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the E2E-X5MF2 is determined by strict alignment of the following critical parameters:

• Sensor Type: Must remain inductive for functional equivalence
• Sensing Distance: Must maintain 0.197" (5mm) detection range
• Output Type: Must preserve PNP-NC, 3-Wire configuration for circuit compatibility
• Package / Case: Must use Cylinder, Threaded - M12 form factor for mechanical fit
• Ingress Protection: Must meet or exceed IP67 rating for environmental sealing
• Operating Temperature Range: Must support -40°C ~ 85°C operational envelope
• Voltage Supply Range: Substitute must operate within or be compatible with the 10V ~ 40V supply specification

The E2E-X5MB212 2M satisfies all mandatory substitution criteria while offering enhanced specifications in response frequency and additional ingress protection rating.

Parameter Comparison

Engineering Selection Recommendations

The E2E-X5MB212 2M is the manufacturer-recommended substitute for the obsolete E2E-X5MF2. Both sensors maintain identical core functional parameters: inductive sensing principle, 5mm detection distance, PNP-NC output configuration, and M12 cylindrical package. The substitute part is currently in active production status, ensuring long-term availability and supply chain continuity.

The E2E-X5MB212 2M provides enhanced performance characteristics, including doubled response frequency (800Hz versus 400Hz) and extended ingress protection certification (IP67 and IP69K). The substitute operates within a reduced voltage supply range of 10V to 30V, which remains compatible with standard industrial control systems. Both parts maintain identical operating temperature specifications and equivalent environmental sealing performance.

From a compliance perspective, the substitute part carries ROHS3 certification and REACH compliance status, meeting current regulatory requirements for electronic component procurement. The active product status of the E2E-X5MB212 2M ensures availability of technical documentation, application support, and consistent manufacturing quality.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X5MB212 2M be used as a direct replacement for the E2E-X5MF2?

A: Yes. Both sensors share identical sensing distance (5mm), output type (PNP-NC, 3-Wire), package configuration (M12 cylinder), and operating temperature range (-40°C to 85°C). The substitute maintains full functional and mechanical compatibility.

Q: What is the voltage supply difference between these parts?

A: The E2E-X5MF2 operates at 10V to 40V, while the E2E-X5MB212 2M operates at 10V to 30V. If your system supplies voltage above 30V, the substitute part cannot be used. For systems operating at 30V or below, the substitute is fully compatible.

Q: Does the higher response frequency of the substitute affect compatibility?

A: No. The E2E-X5MB212 2M's 800Hz response frequency is an enhancement over the original 400Hz specification. Higher response frequency provides faster detection switching without creating compatibility issues in existing circuits.

Q: Are the M12 connectors identical between both parts?

A: Yes. Both sensors use identical Cylinder, Threaded - M12 package configuration, ensuring mechanical fit and connector compatibility in existing installations.

Q: What is the difference between IP67 and IP69K ratings?

A: The E2E-X5MB212 2M carries both IP67 and IP69K certifications. IP67 provides dust protection and temporary immersion capability. IP69K adds high-pressure jet protection. The substitute offers equal or superior environmental sealing compared to the original part's IP67 rating.

Q: Is the substitute part RoHS compliant?

A: Yes. The E2E-X5MB212 2M carries ROHS3 compliance certification, meeting current regulatory requirements for hazardous substance restrictions in electronic components.